From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 26 Apr 2016 18:11:31 +0200 Subject: [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT In-Reply-To: References: <1461203293-20462-1-git-send-email-festevam@gmail.com> Message-ID: <571F9333.7080505@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 26/04/2016 17:58, Fabio Estevam wrote: > Tom/Stefano, > > On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam wrote: >> From: Fabio Estevam >> >> mx6ul_evk does not come with a eMMC populated, so we should not >> define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able >> to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: >> >> U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) >> Trying to boot from MMC1 >> spl: mmc block read error >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns >> MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot >> via SD card. >> >> Signed-off-by: Fabio Estevam > > Could this one be applied for 2016.05? I pick it up Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================