From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Wed, 27 Apr 2016 09:23:49 +0200 Subject: [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL. In-Reply-To: References: <1461683133-16676-1-git-send-email-enric.balletbo@collabora.com> <57203F42.60803@denx.de> Message-ID: <57206905.7030401@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Enric, Am 27.04.2016 um 09:00 schrieb Enric Balletbo Serra: > Hi Heiko, > > 2016-04-27 6:25 GMT+02:00 Heiko Schocher >: > > Hello Enric, > > > > Am 26.04.2016 um 17:05 schrieb Enric Balletbo i Serra: > >> > >> Internal SRAM starts at 0x40200000 and ends at 0x4020FFFF, so there > >> are 64KB available to be used for SPL. This will also help some > >> compilers to fit all the code into the allocated space. > >> > >> Signed-off-by: Enric Balletbo i Serra > > >> --- > >> include/configs/omap3_igep00x0.h | 7 +++++++ > >> 1 file changed, 7 insertions(+) > >> > >> diff --git a/include/configs/omap3_igep00x0.h > >> b/include/configs/omap3_igep00x0.h > >> index 5da50a5..2459064 100644 > >> --- a/include/configs/omap3_igep00x0.h > >> +++ b/include/configs/omap3_igep00x0.h > >> @@ -19,6 +19,13 @@ > >> #include > >> #include > >> > >> +/* SRAM starts at 0x40200000 and ends at 0x4020FFFF (64KB) */ > >> +#undef CONFIG_SPL_MAX_SIZE > >> +#undef CONFIG_SPL_TEXT_BASE > >> + > >> +#define CONFIG_SPL_MAX_SIZE (64*1024) > >> +#define CONFIG_SPL_TEXT_BASE 0x40200000 > > > > > > Hmm... risky, as the SPL needs at last some bytes for stack, until > > RAM is initialized and stack moved to it ... or do I miss something? > > > > This is what I thought, orginally I thought > > CONFIG_SPL_MAX_SIZE (60*1024) /* 4KB for stack */ > > But then I saw that overo and logic boards set > > CONFIG_SPL_MAX_SIZE (64 * 1024) > > I send this version just to have some discussion. So, can we say that overo and logic boards are > incorrect too (or at least risky)? And, Tom proposed a 4KB stack, do you think it's enough? I would say risky. How many stack you need, depends on what tasks SPL has to do ... May you try to move the stack into RAM? Then you need less then 4k for the initial stack in SPL ... You may want to look into: CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_STACK_R defines ... bye, Heiko > > Regards, > Enric > > > bye, > > Heiko > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot at lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany