[U-Boot] [PATCH] usb: dwc2: Init desc_before_addr

[Marek Vasut <marex@denx.de>]

On 04/27/2016 07:15 PM, Dinh Nguyen wrote:
> On 04/25/2016 08:08 PM, Marek Vasut wrote:
>> Initialize desc_before_addr, otherwise the USB core won't send the
>> first 64B Get Device Descriptor request in common/usb.c function
>> usb_setup_descriptor() . There are some USB devices which expect
>> this sequence and otherwise can misbehave.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
>> Cc: Tom Rini <trini@konsulko.com>
>> ---
>>  drivers/usb/host/dwc2.c | 3 +++
>>  1 file changed, 3 insertions(+)
>> ---
>> NOTE: I checked this with TotalPhase Beagle USB480 and it does what it is
>>       supposed to do now. It would be wonderful to get this into rc3.
>>
>> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
>> index b2f4bc6..559c43f 100644
>> --- a/drivers/usb/host/dwc2.c
>> +++ b/drivers/usb/host/dwc2.c
>> @@ -1182,6 +1182,9 @@ static int dwc2_usb_ofdata_to_platdata(struct udevice *dev)
>>  static int dwc2_usb_probe(struct udevice *dev)
>>  {
>>  	struct dwc2_priv *priv = dev_get_priv(dev);
>> +	struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
>> +
>> +	bus_priv->desc_before_addr = true;
>>  
>>  	return dwc2_init_common(priv);
>>  }
>>
> 
> With this patch, I no longer have to revert commit "c998da0d67091 usb:
> Change power-on / scanning timeout handling" for my problematic Kingston
> USB stick to work.
> 
> So feel free to add:
> 
> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Good for you, bad for me ;-) If we don't fix this USB horror before
ELCE, you can expect a nice gift :)

> Dinh
> 


-- 
Best regards,
Marek Vasut