[U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable

[Michal Simek <michal.simek@xilinx.com>]

Hi Joe,

On 28.4.2016 06:52, Joe Hershberger wrote:
> On Wed, Apr 27, 2016 at 10:46 AM, Dan Murphy <dmurphy@ti.com> wrote:
>> Joe
>>
>> On 04/26/2016 04:44 PM, Joe Hershberger wrote:
>>> On Mon, Apr 25, 2016 at 4:35 PM, Joe Hershberger
>>> <joe.hershberger@gmail.com> wrote:
>>>> On Fri, Apr 15, 2016 at 7:27 AM, Dan Murphy <dmurphy@ti.com> wrote:
>>>>> Not all devices use the same internal delay or fifo depth.
>>>>> Add the ability to set the internal delay for rx or tx and the
>>>>> fifo depth via the devicetree.  If the value is not set in the
>>>>> devicetree then set the delay to the default.
>>>>>
>>>>> If devicetree is not used then use the default defines within the
>>>>> driver.
>>>>>
>>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
>>> This patch is not checkpatch.pl clean. Please resubmit.
>>>
>>>
>>> 610950.mbox:140: WARNING: line over 80 characters
>>> 610950.mbox:153: WARNING: line over 80 characters
>>> 610950.mbox:154: WARNING: line over 80 characters
>>> 610950.mbox:165: WARNING: line over 80 characters
>>> total: 0 errors, 4 warnings, 0 checks, 136 lines checked
>>
>> How do you want me to rebase these patches on the SGMII work from Michal on the ti.c
>> or off of master?  The patch I submitted was based off of the SGMII patchset.
> 
> I'm pulling in some of Michal's patches this release. Please reference
> which patches this depends on (patchwork links).

NOTE: A lot of my patches (maybe all of them) were already merged to
mainline via Xilinx tree.

Cheers,
Michal