From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Thu, 28 Apr 2016 08:26:23 +0200 Subject: [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable In-Reply-To: References: <1460723242-20805-1-git-send-email-dmurphy@ti.com> <1460723242-20805-4-git-send-email-dmurphy@ti.com> <5720DEE8.6010909@ti.com> Message-ID: <5721AD0F.9080305@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Joe, On 28.4.2016 06:52, Joe Hershberger wrote: > On Wed, Apr 27, 2016 at 10:46 AM, Dan Murphy wrote: >> Joe >> >> On 04/26/2016 04:44 PM, Joe Hershberger wrote: >>> On Mon, Apr 25, 2016 at 4:35 PM, Joe Hershberger >>> wrote: >>>> On Fri, Apr 15, 2016 at 7:27 AM, Dan Murphy wrote: >>>>> Not all devices use the same internal delay or fifo depth. >>>>> Add the ability to set the internal delay for rx or tx and the >>>>> fifo depth via the devicetree. If the value is not set in the >>>>> devicetree then set the delay to the default. >>>>> >>>>> If devicetree is not used then use the default defines within the >>>>> driver. >>>>> >>>>> Signed-off-by: Dan Murphy >>>> Acked-by: Joe Hershberger >>> This patch is not checkpatch.pl clean. Please resubmit. >>> >>> >>> 610950.mbox:140: WARNING: line over 80 characters >>> 610950.mbox:153: WARNING: line over 80 characters >>> 610950.mbox:154: WARNING: line over 80 characters >>> 610950.mbox:165: WARNING: line over 80 characters >>> total: 0 errors, 4 warnings, 0 checks, 136 lines checked >> >> How do you want me to rebase these patches on the SGMII work from Michal on the ti.c >> or off of master? The patch I submitted was based off of the SGMII patchset. > > I'm pulling in some of Michal's patches this release. Please reference > which patches this depends on (patchwork links). NOTE: A lot of my patches (maybe all of them) were already merged to mainline via Xilinx tree. Cheers, Michal