[U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support

[Marek Vasut <marex@denx.de>]

On 04/28/2016 07:59 AM, Stefano Babic wrote:
> Hi Marek,
> 
> On 28/04/2016 04:24, Peng Fan wrote:
>> Hi Marek,
>>
>> On Thu, Apr 28, 2016 at 01:06:07AM +0200, Marek Vasut wrote:
>>> Enable support for booting U-Boot image from filesystem instead of some
>>> random offset on the SD card. This makes the board usable by putting the
>>> u-boot.img to first partition of the SD card and writing the SPL this way:
>>> $ dd if=u-boot-with-spl.imx of=/dev/sdX seek=2 bs=512
>>
>> I once want to enable this for i.MX6UL, but was rejected.
>> Anyway I prefer load u-boot.img from filesystem.
>>
> 
> Right - we have this discussion some times ago. The agreement we reach
> was to maintain SPL loading only from a raw image.
> 
> https://www.mail-archive.com/u-boot at lists.denx.de/msg185432.html

The feeling I get from the discussion you linked above and the
discussion here is that because user can be an idiot and delete
files at random, we should move back to the 80s and store files
like on the casette tapes, at random offset. User can also delete
kernel image and yet, we store it on the filesystem. Maybe we should
also store the kernel image at another raw offset ... and hey, maybe
we should ditch filesystem altogether, just tar everything up and
store it at yet another offset, since user might delete files at
random, just imaging he'd delete libc ...

-- 
Best regards,
Marek Vasut