From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 3 May 2016 07:39:45 +0200 Subject: [U-Boot] [PATCH] dm: at91: Add driver model support for the spi driver In-Reply-To: References: <1461556123-22732-1-git-send-email-wenyou.yang@atmel.com> Message-ID: <572839A1.2050607@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Simon, Wenyou, Am 03.05.2016 um 02:47 schrieb Yang, Wenyou: > Hi Simon, > > Thank you for your support. > >> -----Original Message----- >> From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass >> Sent: 2016?5?2? 2:56 >> To: Yang, Wenyou >> Cc: U-Boot Mailing List >> Subject: Re: [U-Boot] [PATCH] dm: at91: Add driver model support for the spi >> driver >> >> Hi Wenyou, >> >> On 24 April 2016 at 21:48, Wenyou Yang wrote: >>> Add driver model support while retaining the existing legacy code. >>> This allows the driver to support boards that have converted to driver >>> model as well as those that have not. >>> >>> Signed-off-by: Wenyou Yang >> >> It is possible to combine this into the existing driver and reuse much of the code? > > Yes, it is. > > As you know, it will take a long time to complete the DT & DM conversion. There is a question, > I don't know how to make all the boards works, inclusive ones which doesn't convert to DT. > >> >> BTW I have WIP patches to convert macb Ethernet and video. See u-boot- >> dm/gurnard-working. I plan to post these next week. > > Thank you for your information. It is very important for me. I just used the patches from Simon from the "dm/gurnard-working" branch to convert the mainlined AT91 based boards from siemens (smartweb, corvus, taurus and axm) to DM / DTS support. Ethernet uart, gpio works fine with them. Thanks Simon! bye, Heiko > >> >> Regards, >> Simon > > > Best Regards, > Wenyou Yang > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany