[U-Boot] [PATCH] imx: iomux-v3: fix UART input selects

[Stefano Babic <sbabic@denx.de>]

Hi Stefan,


On 05/05/2016 22:32, Stefan Agner wrote:
> Several UART input selects are missing. The fourth input select
> for UART2_TX_DATA_ALT0 is actually also missing in the documentation.
> (at least in Rev. B of the i.MX 7Dual Reference Manual). However,
> when looking at the tables of other input selects, it is very natural
> that there must be an input select for the UART2_TX_DATA_ALT0 pad.
> The Colibri iMX7 also uses that pad for UART2 RX (in DTE mode), and
> it was required to set that particular input select register to get a
> working UART2.
> ---
>  arch/arm/include/asm/arch-mx7/mx7d_pins.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mx7/mx7d_pins.h b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> index d8b4097..0ab1246 100644
> --- a/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> +++ b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> @@ -635,7 +635,7 @@ enum {
>  	MX7D_PAD_LCD_DATA23__GPIO3_IO28                          = IOMUX_PAD(0x0394, 0x0124, 5, 0x0000, 0, 0),
>  	MX7D_PAD_LCD_DATA23__I2C4_SDA                            = IOMUX_PAD(0x0394, 0x0124, IOMUX_CONFIG_SION | 6, 0x05F0, 1, 0),
>  
> -	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                     = IOMUX_PAD(0x0398, 0x0128, 0, 0x0000, 0, 0),
> +	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                     = IOMUX_PAD(0x0398, 0x0128, 0, 0x06F4, 0, 0),
>  
>  	MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                     = IOMUX_PAD(0x0398, 0x0128, 0, 0x0000, 0, 0),
>  	MX7D_PAD_UART1_RX_DATA__I2C1_SCL                         = IOMUX_PAD(0x0398, 0x0128, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
> @@ -655,7 +655,7 @@ enum {
>  	MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                        = IOMUX_PAD(0x039C, 0x012C, 5, 0x0000, 0, 0),
>  	MX7D_PAD_UART1_TX_DATA__ENET1_MDC                        = IOMUX_PAD(0x039C, 0x012C, 6, 0x0000, 0, 0),
>  
> -	MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                     = IOMUX_PAD(0x03A0, 0x0130, 0, 0x0000, 0, 0),
> +	MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                     = IOMUX_PAD(0x03A0, 0x0130, 0, 0x06FC, 2, 0),
>  
>  	MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                     = IOMUX_PAD(0x03A0, 0x0130, 0, 0x0000, 0, 0),
>  	MX7D_PAD_UART2_RX_DATA__I2C2_SCL                         = IOMUX_PAD(0x03A0, 0x0130, IOMUX_CONFIG_SION | 1, 0x0000, 0, 0),
> @@ -667,7 +667,7 @@ enum {
>  
>  	MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                     = IOMUX_PAD(0x03A4, 0x0134, 0, 0x0000, 0, 0),
>  
> -	MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                     = IOMUX_PAD(0x03A4, 0x0134, 0, 0x0000, 0, 0),
> +	MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                     = IOMUX_PAD(0x03A4, 0x0134, 0, 0x06FC, 3, 0),
>  	MX7D_PAD_UART2_TX_DATA__I2C2_SDA                         = IOMUX_PAD(0x03A4, 0x0134, IOMUX_CONFIG_SION | 1, 0x05E0, 0, 0),
>  	MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                    = IOMUX_PAD(0x03A4, 0x0134, 2, 0x06C8, 0, 0),
>  	MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                       = IOMUX_PAD(0x03A4, 0x0134, 3, 0x0000, 0, 0),
> @@ -695,7 +695,7 @@ enum {
>  	MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                        = IOMUX_PAD(0x03AC, 0x013C, 5, 0x0000, 0, 0),
>  	MX7D_PAD_UART3_TX_DATA__SD2_LCTL                         = IOMUX_PAD(0x03AC, 0x013C, 6, 0x0000, 0, 0),
>  
> -	MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                      = IOMUX_PAD(0x03B0, 0x0140, 0, 0x0000, 0, 0),
> +	MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                      = IOMUX_PAD(0x03B0, 0x0140, 0, 0x0700, 2, 0),
>  
>  	MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                      = IOMUX_PAD(0x03B0, 0x0140, 0, 0x0000, 0, 0),
>  	MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                        = IOMUX_PAD(0x03B0, 0x0140, 1, 0x0000, 0, 0),
> 

Applied to -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================