From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration
Date: Tue, 10 May 2016 14:24:11 +0200 [thread overview]
Message-ID: <5731D2EB.4010103@denx.de> (raw)
In-Reply-To: <20160510114415.2476-6-mugunthanvnm@ti.com>
On 05/10/2016 01:44 PM, Mugunthan V N wrote:
> prepare driver for driver model migration
>
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> ---
> drivers/usb/gadget/ether.c | 72 ++++++++++++++++++++++++++++++++--------------
> 1 file changed, 51 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
> index 47071c3..2f70ebf 100644
> --- a/drivers/usb/gadget/ether.c
> +++ b/drivers/usb/gadget/ether.c
> @@ -2334,9 +2334,8 @@ int dm_usb_init(struct eth_dev *e_dev)
> }
> #endif
>
> -static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
> +static int _usb_eth_init(struct ether_priv *priv)
> {
> - struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> struct eth_dev *dev = &priv->ethdev;
> struct usb_gadget *gadget;
> unsigned long ts;
> @@ -2415,11 +2414,10 @@ fail:
> return -1;
> }
>
> -static int usb_eth_send(struct eth_device *netdev, void *packet, int length)
> +static int _usb_eth_send(struct ether_priv *priv, void *packet, int length)
> {
> int retval;
> void *rndis_pkt = NULL;
> - struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> struct eth_dev *dev = &priv->ethdev;
> struct usb_request *req = dev->tx_req;
> unsigned long ts;
> @@ -2485,30 +2483,15 @@ drop:
> return -ENOMEM;
> }
>
> -static int usb_eth_recv(struct eth_device *netdev)
> +static int _usb_eth_recv(struct ether_priv *priv)
> {
> - struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> - struct eth_dev *dev = &priv->ethdev;
> -
> usb_gadget_handle_interrupts(0);
>
> - if (packet_received) {
> - debug("%s: packet received\n", __func__);
> - if (dev->rx_req) {
> - net_process_received_packet(net_rx_packets[0],
> - dev->rx_req->length);
> - packet_received = 0;
> -
> - rx_submit(dev, dev->rx_req, 0);
> - } else
> - error("dev->rx_req invalid");
> - }
> return 0;
> }
>
> -void usb_eth_halt(struct eth_device *netdev)
> +void _usb_eth_halt(struct ether_priv *priv)
> {
> - struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> struct eth_dev *dev = &priv->ethdev;
>
> /* If the gadget not registered, simple return */
> @@ -2544,6 +2527,53 @@ void usb_eth_halt(struct eth_device *netdev)
> #endif
> }
>
> +static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
> +{
> + struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> +
> + return _usb_eth_init(priv);
> +}
> +
> +static int usb_eth_send(struct eth_device *netdev, void *packet, int length)
> +{
> + struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> +
> + return _usb_eth_send(priv, packet, length);
> +}
> +
> +static int usb_eth_recv(struct eth_device *netdev)
> +{
> + struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> + struct eth_dev *dev = &priv->ethdev;
> + int ret;
> +
> + ret = _usb_eth_recv(priv);
> + if (ret) {
> + error("error packet receive\n");
> + return ret;
> + }
> +
> + if (packet_received) {
if (!packet_received)
return 0;
... the rest ...
> + if (dev->rx_req) {
> + net_process_received_packet(net_rx_packets[0],
> + dev->rx_req->length);
> + } else {
> + error("dev->rx_req invalid");
> + }
> + packet_received = 0;
> + rx_submit(dev, dev->rx_req, 0);
> + }
> +
> + return 0;
> +}
> +
> +void usb_eth_halt(struct eth_device *netdev)
> +{
> + struct ether_priv *priv = (struct ether_priv *)netdev->priv;
> +
> + _usb_eth_halt(priv);
> +}
> +
> int usb_eth_initialize(bd_t *bi)
> {
> struct eth_device *netdev = &l_priv->netdev;
>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2016-05-10 12:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 11:44 [U-Boot] [PATCH v2 0/6] DM conversion of usb ether gadget Mugunthan V N
2016-05-10 11:44 ` [U-Boot] [PATCH v2 1/6] drivers: usb: gadget: ether: adopt to usb driver model Mugunthan V N
2016-05-19 3:59 ` Simon Glass
2016-05-10 11:44 ` [U-Boot] [PATCH v2 2/6] drivers: usb: gadget: ether: access network_started using local variable Mugunthan V N
2016-05-19 3:59 ` Simon Glass
2016-05-10 11:44 ` [U-Boot] [PATCH v2 3/6] drivers: usb: gadget: ether: consolidate global devices to single struct Mugunthan V N
2016-05-19 4:00 ` Simon Glass
2016-05-10 11:44 ` [U-Boot] [PATCH v2 4/6] drivers: usb: gadget: ether: use net device priv to pass usb ether priv Mugunthan V N
2016-05-19 4:00 ` Simon Glass
2016-05-10 11:44 ` [U-Boot] [PATCH v2 5/6] drivers: usb: gadget: ether: prepare driver for driver model migration Mugunthan V N
2016-05-10 12:24 ` Marek Vasut [this message]
2016-05-12 5:32 ` Mugunthan V N
2016-05-10 11:44 ` [U-Boot] [PATCH v2 6/6] drivers: usb: gadget: ether/rndis: convert driver to adopt device driver model Mugunthan V N
2016-05-10 12:27 ` Marek Vasut
2016-05-12 5:43 ` Mugunthan V N
2016-05-12 11:34 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5731D2EB.4010103@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox