From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Tue, 10 May 2016 18:20:14 +0530
Subject: [U-Boot] Issues with bbone with 2016.05rc3
In-Reply-To: <CALeDE9OGBO4L_Ct1ACPoOeiaF0+ipZWnY_g7CD8KJSbbJ4mDxg@mail.gmail.com>
References: <CALeDE9OGBO4L_Ct1ACPoOeiaF0+ipZWnY_g7CD8KJSbbJ4mDxg@mail.gmail.com>
Message-ID: <5731D906.4030101@ti.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Peter,

On Tuesday 10 May 2016 05:18 PM, Peter Robinson wrote:
> Hi All,
> 
> Not sure if this has been addressed since RC3 but thought I'd
> highlight it just in case. I've not had time to test 2016.05 as much
> as I'd like so playing a bit of catch up here.

Which defconfig are you using? Recently MMC is converted to DM, may be
that could have caused some issue. Can you just disable EMMC_BOOT and
try again?

Thanks and regards,
Lokesh

> 
> I'm seeing two different errors:
> 
> On a BBBlack booting off the emmc (2Gb variety) I see:
> 
> U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41)
> Trying to boot from MMC2
> Card did not respond to voltage select!
> *** Warning - MMC init failed, using default environment
> 
> On a BBGreen booting from a mSD card I see:
> 
> U-Boot SPL 2016.05-rc3 (Apr 28 2016 - 10:53:41)
> Trying to boot from MMC1
> Card doesn't support part_switch
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
> 
> Not sure if they're related. Built with gcc6 if that matters, or at
> least for reference.
> 
> Peter
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>