From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 13 May 2016 14:23:30 +0200 Subject: [U-Boot] [PATCH 1/4] usb: dwc3: fix kconfig In-Reply-To: <1463141873-10604-2-git-send-email-rogerq@ti.com> References: <1463141873-10604-1-git-send-email-rogerq@ti.com> <1463141873-10604-2-git-send-email-rogerq@ti.com> Message-ID: <5735C742.5010603@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/13/2016 02:17 PM, Roger Quadros wrote: > DWC3 can be used in host only or gadget only mode. > > Signed-off-by: Roger Quadros > --- > drivers/usb/dwc3/Kconfig | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig > index e93398f..caf695b 100644 > --- a/drivers/usb/dwc3/Kconfig > +++ b/drivers/usb/dwc3/Kconfig > @@ -1,15 +1,16 @@ > config USB_DWC3 > bool "DesignWare USB3 DRD Core Support" > - depends on (USB && USB_GADGET) > - select USB_GADGET_DUALSPEED > + depends on (USB || USB_GADGET) > + select USB_GADGET_DUALSPEED if USB_GADGET > help > - Say Y here if your system has a Dual Role SuperSpeed > - USB controller based on the DesignWare USB3 IP Core. > + Say Y here if your system has DesignWare USB3 IP Core. > > if USB_DWC3 > > choice > bool "DWC3 Mode Selection" > + default USB_DWC3_HOST if (USB && !USB_GADGET) > + default USB_DWC3_GADGET if (!USB && USB_GADGET) What happens if I select both USB and USB_GADGET ? > config USB_DWC3_HOST > bool "Host only mode" > -- Best regards, Marek Vasut