public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports
Date: Mon, 16 May 2016 20:58:59 +0200	[thread overview]
Message-ID: <573A1873.4010706@gmail.com> (raw)
In-Reply-To: <1463420679-5042-4-git-send-email-paul.burton@imgtec.com>



Am 16.05.2016 um 19:44 schrieb Paul Burton:
> If the UART is to be accessed using I/O port accessors (inb & outb) then
> using map_physmem doesn't make sense, since it operates in a different
> memory space. Remove the call to map_physmem when
> CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
> to not be mangled by the incorrect mapping.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

> ---
> 
> Changes in v2:
> - New patch, part of a simplified approach tackling only a single Malta UART.
> 
>  drivers/serial/ns16550.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 28da9dd..e58e6aa 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -100,7 +100,11 @@ static void ns16550_writeb(NS16550_t port, int offset, int value)
>  	unsigned char *addr;
>  
>  	offset *= 1 << plat->reg_shift;
> +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
> +	addr = (unsigned char *)plat->base + offset;
> +#else
>  	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
> +#endif
>  	/*
>  	 * As far as we know it doesn't make sense to support selection of
>  	 * these options at run-time, so use the existing CONFIG options.
> @@ -114,7 +118,11 @@ static int ns16550_readb(NS16550_t port, int offset)
>  	unsigned char *addr;
>  
>  	offset *= 1 << plat->reg_shift;
> +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
> +	addr = (unsigned char *)plat->base + offset;
> +#else
>  	addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset;
> +#endif
>  
>  	return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
>  }
> 

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160516/ea38488e/attachment.sig>

  reply	other threads:[~2016-05-16 18:58 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-16 17:44 [U-Boot] [PATCH v2 0/5] Malta UART using device model & device tree Paul Burton
2016-05-16 17:44 ` [U-Boot] [PATCH v2 1/5] fdt: Support for ISA busses Paul Burton
2016-05-17 12:11   ` Simon Glass
2016-05-16 17:44 ` [U-Boot] [PATCH v2 2/5] fdt: Document the rest of struct of_bus Paul Burton
2016-05-17 12:11   ` Simon Glass
2016-05-16 17:44 ` [U-Boot] [PATCH v2 3/5] dm: ns16550: Don't map_physmem for I/O ports Paul Burton
2016-05-16 18:58   ` Daniel Schwierzeck [this message]
2016-05-17 12:11   ` Simon Glass
2016-05-17 12:48     ` Paul Burton
2016-05-17 15:51       ` Daniel Schwierzeck
2016-05-17 15:54         ` Simon Glass
2016-05-17 15:58           ` Paul Burton
2016-05-17 16:00             ` Simon Glass
2016-05-18 10:04               ` Daniel Schwierzeck
2016-05-18 14:52                 ` Simon Glass
2016-05-21 16:50                   ` Daniel Schwierzeck
2016-05-24 15:34                     ` Paul Burton
2016-05-16 17:44 ` [U-Boot] [PATCH v2 4/5] malta: Tidy up UART address selection Paul Burton
2016-05-16 18:57   ` Daniel Schwierzeck
2016-05-16 17:44 ` [U-Boot] [PATCH v2 5/5] malta: Use device model & tree for UART Paul Burton
2016-05-16 18:56   ` Daniel Schwierzeck
2016-05-17  6:40     ` Paul Burton
2016-05-17 10:57       ` Daniel Schwierzeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=573A1873.4010706@gmail.com \
    --to=daniel.schwierzeck@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox