[U-Boot] [PATCH v2 8/8] board: am335x: Allow to choose serial device dynamically

[Lokesh Vutla <lokeshvutla@ti.com>]

On 5/17/2016 6:11 AM, Tom Rini wrote:
> On Mon, May 16, 2016 at 11:47:29AM +0530, Lokesh Vutla wrote:
>
>> Different AM335x based platforms have different serial consoles. As serial
>> console is Kconfig option a separate defconfig has to be created for each
>> platform. So pass the serial device dynamically.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> Changes since v1:
>> - New patch.
>>   board/ti/am335x/board.c | 11 +++++++++++
>>   include/serial.h        |  4 ++++
>>   2 files changed, 15 insertions(+)
>>
>> diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
>> index ff52314..56f4984 100644
>> --- a/board/ti/am335x/board.c
>> +++ b/board/ti/am335x/board.c
>> @@ -11,6 +11,7 @@
>>   #include <common.h>
>>   #include <errno.h>
>>   #include <spl.h>
>> +#include <serial.h>
>>   #include <asm/arch/cpu.h>
>>   #include <asm/arch/hardware.h>
>>   #include <asm/arch/omap.h>
>> @@ -59,6 +60,16 @@ static inline int __maybe_unused read_eeprom(void)
>>   	return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
>>   }
>>
>> +#ifndef CONFIG_DM_SERIAL
>> +struct serial_device *default_serial_console(void)
>> +{
>> +	if (board_is_icev2())
>> +		return &eserial4_device;
>> +	else
>> +		return &eserial1_device;
>> +}
>> +#endif
>> +
>>   #ifndef CONFIG_SKIP_LOWLEVEL_INIT
>>   static const struct ddr_data ddr2_data = {
>>   	.datardsratio0 = MT47H128M16RT25E_RD_DQS,
>
> ... so in the DM case we're already handling this correctly?  Can't we

With DM+DT we are handling it correctly which is only in U-Boot. This 
part of code is meant for only SPL(DM_* is not yet enabled in SPL).

Thanks and regards,
Lokesh

> just say that ICEv2 is only supported with DM enabled so that we don't
> need to add compat code that we'll remove rather soon (I hope..) ?
> Thanks!
>