From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation
Date: Tue, 17 May 2016 19:03:18 +0200 [thread overview]
Message-ID: <573B4ED6.2000607@xilinx.com> (raw)
In-Reply-To: <573B4E26.7070909@wwwdotorg.org>
On 17.5.2016 19:00, Stephen Warren wrote:
> On 05/17/2016 10:56 AM, Michal Simek wrote:
>> Hi Stephen,
>>
>> On 17.5.2016 18:50, Stephen Warren wrote:
>>> On 05/17/2016 07:57 AM, Michal Simek wrote:
>>>> If timeout happen it should be reported as fault.
>>>
>>> Presumably if a timeout occurs, the expected text does not appear, i.e.
>>> the existing assert fails anyway?
>>>
>>> Anyway, it's useful to point out problems explicitly, so,
>>> Acked-by: Stephen Warren <swarren@nvidia.com>
>>
>> Unfortunately I found this issue when I was checking logs where I am
>> getting this.
>>
>> ethernet at e000b000 Waiting for PHY auto negotiation to complete.........
>> TIMEOUT !
>> BOOTP broadcast 1
>> BOOTP broadcast 2
>> BOOTP broadcast 3
>> DHCP client bound to address 192.168.0.107 (882 ms)
>> Zynq> .Zynq> setenv serverip 192.168.0.105
>>
>> I haven't looked at the exact reason why it is failing but IMHO it is
>> worth to check.
>
> Oh, in that case I think I should withdraw my ack; in the log above, the
> operation completed successfully, so I'm not convinced the test should
> be marked a failure. I thought this change simply provided more detail
> re: the cause of a test failure.
Is there any other way how to run just phy negotiation and mark this
test as fail?
Thanks
Michal
next prev parent reply other threads:[~2016-05-17 17:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-17 13:57 [U-Boot] [PATCH] test/py: Detect timeout in phy negotiation Michal Simek
2016-05-17 16:50 ` Stephen Warren
2016-05-17 16:56 ` Michal Simek
2016-05-17 17:00 ` Stephen Warren
2016-05-17 17:03 ` Michal Simek [this message]
2016-05-17 17:36 ` Stephen Warren
2016-05-17 18:00 ` Michal Simek
2016-05-17 19:09 ` Stephen Warren
2016-05-18 10:56 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=573B4ED6.2000607@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox