From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode
Date: Wed, 18 May 2016 20:42:39 +0530 [thread overview]
Message-ID: <573C8667.10005@ti.com> (raw)
In-Reply-To: <8e3d705c04c22e79959554093678775cdd84b4e3.1463504422.git.michal.simek@xilinx.com>
On 5/17/2016 10:30 PM, Michal Simek wrote:
> Support loading FIT in SPL for RAM bootmode.
> CONFIG_SPL_LOAD_FIT_ADRESS points to address where FIT image is stored
> in memory.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Fix empty line
> - Fix addr name and remove SPL_LOAD_FIT macro
>
> common/spl/spl.c | 45 ++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 36 insertions(+), 9 deletions(-)
>
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index 0fc5b058be31..3faa751e4b43 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -136,20 +136,47 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
> image_entry();
> }
>
> +#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS
> +# define CONFIG_SPL_LOAD_FIT_ADDRESS 0
> +#endif
> +
May be a good idea to default this to CONFIG_SYS_TEXT_BASE instead of 0?
Other than that patch looks good to me.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Thanks and regards,
Lokesh
> #ifdef CONFIG_SPL_RAM_DEVICE
> +static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
> + ulong count, void *buf)
> +{
> + debug("%s: sector %lx, count %lx, buf %lx\n",
> + __func__, sector, count, (ulong)buf);
> + memcpy(buf, (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + sector), count);
> + return count;
> +}
> +
> static int spl_ram_load_image(void)
> {
> - const struct image_header *header;
> + struct image_header *header;
>
> - /*
> - * Get the header. It will point to an address defined by handoff
> - * which will tell where the image located inside the flash. For
> - * now, it will temporary fixed to address pointed by U-Boot.
> - */
> - header = (struct image_header *)
> - (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
> + header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
>
> - spl_parse_image_header(header);
> + if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
> + image_get_magic(header) == FDT_MAGIC) {
> + struct spl_load_info load;
> +
> + debug("Found FIT\n");
> + load.bl_len = 1;
> + load.read = spl_ram_load_read;
> + spl_load_simple_fit(&load, 0, header);
> + } else {
> + debug("Legacy image\n");
> + /*
> + * Get the header. It will point to an address defined by
> + * handoff which will tell where the image located inside
> + * the flash. For now, it will temporary fixed to address
> + * pointed by U-Boot.
> + */
> + header = (struct image_header *)
> + (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
> +
> + spl_parse_image_header(header);
> + }
>
> return 0;
> }
>
next prev parent reply other threads:[~2016-05-18 15:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-17 17:00 [U-Boot] [PATCH v2] SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode Michal Simek
2016-05-18 15:12 ` Lokesh Vutla [this message]
2016-05-18 15:22 ` Michal Simek
2016-05-18 16:50 ` Lokesh Vutla
2016-05-19 16:15 ` Andreas Dannenberg
2016-05-19 16:38 ` Michal Simek
2016-05-19 18:16 ` Andreas Dannenberg
2016-05-19 18:33 ` Michal Simek
2016-05-19 19:26 ` Andreas Dannenberg
2016-05-20 6:05 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=573C8667.10005@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox