[U-Boot] [PATCH] net: Add ag7xxx driver for Atheros MIPS

[Marek Vasut <marex@denx.de>]

On 05/20/2016 06:43 PM, Wills Wang wrote:
> 
> 
> On 05/20/2016 07:59 PM, Marek Vasut wrote:
>> On 05/20/2016 06:18 AM, Wills Wang wrote:
>>>
>>> On 05/08/2016 11:22 PM, Marek Vasut wrote:
>>>> On 05/08/2016 02:58 PM, Daniel Schwierzeck wrote:
>>>>
>>>> Hi!
>>>>
>>>>> Am 05.05.2016 um 21:34 schrieb Marek Vasut:
>>>>>> Add ethernet driver for the AR933x and AR934x Atheros MIPS machines.
>>>>>> The driver could be easily extended to other WiSoCs.
>>> How to make this patch work on ar933x board?
>>> I apply this patch on the top of mips/next branch and enable this option
>>> in menuconfig,
>>> but i can't see any boot information for Ethernet.
>> The Kconfig conversion is not complete. See the tplink_wdr4300_defconfig
>> for the necessary options, it should be at least these:
>>
>> CONFIG_CMD_NET=y
>> CONFIG_CMD_NFS=y
>> CONFIG_CMD_DHCP=y
>> CONFIG_CMD_PING=y
>> CONFIG_NET_RANDOM_ETHADDR=y
>> CONFIG_DM_ETH=y
>> CONFIG_AG7XXX=y
>>
> I add these options and boot up as the following, but my ar933x board
> don't work,
> the link indicator led on router is off when plug in the cable and
> execute "dhcp" command.
> 

Hrm, I have no idea, sorry, you'd have to dive in. It works on the board
I have. The ar933x is such a junk chip that I kinda gave up on it. I
also tested this on ar934x (my primary test platform) and it works.

-- 
Best regards,
Marek Vasut