[U-Boot] [PATCH 9/9] mips: ath79: Add support for TPLink WDR4300

[Marek Vasut <marex@denx.de>]

On 05/21/2016 06:29 PM, Wills Wang wrote:
> 
> 
> On 05/07/2016 02:10 AM, Marek Vasut wrote:
> [...]
>> diff --git a/board/tplink/wdr4300/wdr4300.c
>> b/board/tplink/wdr4300/wdr4300.c
>> new file mode 100644
>> index 0000000..6e070fd
>> --- /dev/null
>> +++ b/board/tplink/wdr4300/wdr4300.c
>> @@ -0,0 +1,74 @@
>> +/*
>> + * Copyright (C) 2016 Marek Vasut <marex@denx.de>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <asm/addrspace.h>
>> +#include <asm/types.h>
>> +#include <mach/ath79.h>
>> +#include <mach/ar71xx_regs.h>
>> +#include <mach/ddr.h>
>> +#include <debug_uart.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +#ifdef CONFIG_USB
>> +static void wdr4300_usb_start(void)
>> +{
>> +    void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
>> +                          AR71XX_GPIO_SIZE, MAP_NOCACHE);
>> +    if (!gpio_regs)
>> +        return;
>> +
>> +    /* Power up the USB HUB. */
>> +    clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22));
>> +    writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET);
>> +    mdelay(1);
>> +
>> +    ath79_usb_reset();
>> +}
>> +#else
>> +static inline void wdr4300_usb_start(void) {}
>> +#endif
>> +
>> +#ifdef CONFIG_BOARD_EARLY_INIT_F
>> +int board_early_init_f(void)
>> +{
>> +    void __iomem *regs;
>> +
>> +    regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
>> +               MAP_NOCACHE);
>> +
>> +    /* Assure JTAG is not disconnected. */
>> +    writel(0x40, regs + AR934X_GPIO_REG_FUNC);
>> +
>> +    /* Configure default GPIO input/output regs. */
>> +    writel(0x3031b, regs + AR71XX_GPIO_REG_OE);
>> +    writel(0x0f804, regs + AR71XX_GPIO_REG_OUT);
>> +
>> +    /* Configure pin multiplexing. */
>> +    writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
>> +    writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1);
>> +    writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
>> +    writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
>> +    writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4);
>> +    writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
>> +
>> +#ifdef CONFIG_DEBUG_UART
>> +    debug_uart_init();
>> +#endif
>> +
>> +#ifndef CONFIG_SKIP_LOWLEVEL_INIT
>> +    ar934x_pll_init(560, 480, 240);
>> +    ar934x_ddr_init(560, 480, 240);
>> +#endif
> Can we get it to work  if CONFIG_SKIP_LOWLEVEL_INIT is defined?

Well no, that's what CONFIG_SKIP_LOWLEVEL_INIT is for -- skipping low
level initialization of the hardware.

-- 
Best regards,
Marek Vasut