[U-Boot] [PATCH 7/7] mips: ath79: ap121: Enable ethernet

[Marek Vasut <marex@denx.de>]

On 05/22/2016 05:59 AM, Wills Wang wrote:
> This patch enable network function for ap121 board, it's based on
> the coming ethernet driver ag7xxx.
> 
> Signed-off-by: Wills Wang <wills.wang@live.com>
> ---

Acked-by: Marek Vasut <marex@denx.de>

>  arch/mips/dts/ap121.dts   | 5 +++++
>  arch/mips/dts/ar933x.dtsi | 4 ++--
>  board/qca/ap121/ap121.c   | 2 ++
>  configs/ap121_defconfig   | 9 +++++++--
>  4 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
> index e31f601..a934a58 100644
> --- a/arch/mips/dts/ap121.dts
> +++ b/arch/mips/dts/ap121.dts
> @@ -41,3 +41,8 @@
>  		reg = <0>;
>  	};
>  };
> +
> +&gmac0 {
> +	phy-mode = "rmii";
> +	status = "okay";
> +};
> diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
> index 00896b2..971f13e 100644
> --- a/arch/mips/dts/ar933x.dtsi
> +++ b/arch/mips/dts/ar933x.dtsi
> @@ -75,7 +75,7 @@
>  			};
>  
>  			gmac0: eth at 0x19000000 {
> -				compatible = "qca,ag7240-mac";
> +				compatible = "qca,ag933x-mac";
>  				reg = <0x19000000 0x200>;
>  				phy = <&phy0>;
>  				phy-mode = "rmii";
> @@ -92,7 +92,7 @@
>  			};
>  
>  			gmac1: eth at 0x1a000000 {
> -				compatible = "qca,ag7240-mac";
> +				compatible = "qca,ag933x-mac";
>  				reg = <0x1a000000 0x200>;
>  				phy = <&phy0>;
>  				phy-mode = "rgmii";
> diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c
> index b0e1993..7b5a4ac 100644
> --- a/board/qca/ap121/ap121.c
> +++ b/board/qca/ap121/ap121.c
> @@ -45,6 +45,8 @@ int board_early_init_f(void)
>  #ifdef CONFIG_DEBUG_UART
>  	debug_uart_init();
>  #endif
> +
>  	ddr_init(400, 400, 200);
> +	ath79_eth_reset();
>  	return 0;
>  }
> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
> index 7604e2e..91fa734 100644
> --- a/configs/ap121_defconfig
> +++ b/configs/ap121_defconfig
> @@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # "
>  CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  # CONFIG_CMD_FPGA is not set
> -# CONFIG_CMD_NET is not set
> -# CONFIG_CMD_NFS is not set
> +CONFIG_CMD_NET=y
> +CONFIG_CMD_NFS=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_PING=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM_ETH=y
> +CONFIG_AG7XXX=y
>  CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_ATMEL=y
> 


-- 
Best regards,
Marek Vasut