[U-Boot] [PATCH] ARM: OMAP4+: Fix DPLL programming sequence

[Nishanth Menon <nm@ti.com>]

On 05/23/2016 03:01 AM, Lokesh Vutla wrote:
> All the output clock parameters of a DPLL needs to be programmed before
> locking the DPLL. But it is being configured after locking the DPLL which
> could potentially bypass DPLL. So fixing this sequence.
> 
> Reported-by: Richard Woodruff <r-woodruff2@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>  arch/arm/cpu/armv7/omap-common/clocks-common.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
> index ef2ac98..2de9935 100644
> --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
> +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
> @@ -236,6 +236,8 @@ static void do_setup_dpll(u32 const base, const struct dpll_params *params,
>  			/* Dpll locked with ideal values for nominal opps. */
>  			debug("\n %s Dpll already locked with ideal"
>  						"nominal opp values", dpll);
> +
> +			bypass_dpll(base);
>  			goto setup_post_dividers;
>  		}
>  	}
> @@ -251,13 +253,13 @@ static void do_setup_dpll(u32 const base, const struct dpll_params *params,
>  
>  	writel(temp, &dpll_regs->cm_clksel_dpll);
>  
> +setup_post_dividers:
> +	setup_post_dividers(base, params);
> +
>  	/* Lock */
>  	if (lock)
>  		do_lock_dpll(base);
>  
> -setup_post_dividers:
> -	setup_post_dividers(base, params);
> -
>  	/* Wait till the DPLL locks */
>  	if (lock)
>  		wait_for_lock(base);
> 

LGTM
Reviewed-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon