[U-Boot] [PATCH] imx: mx6qsabreauto: drop duplicated net phy configuration

[Stefano Babic <sbabic@denx.de>]

On 24/05/2016 14:28, Peng Fan wrote:
> In 'commit d584c68ce0f5bf2f430ccfb2ba00bd506206fb91',
> ar8031 is changed to use ar8035_config. ar8035_config
> actually does the same thing as mx6_rgmii_rework, so
> drop mx6_rgmii_rework and board_phy_config.
> 
> Signed-off-by: Peng Fan <van.freenix@gmail.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c | 33 ---------------------------
>  1 file changed, 33 deletions(-)
> 
> diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
> index 0712f08..d63a979 100644
> --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
> +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
> @@ -321,39 +321,6 @@ static void setup_gpmi_nand(void)
>  }
>  #endif
>  
> -int mx6_rgmii_rework(struct phy_device *phydev)
> -{
> -	unsigned short val;
> -
> -	/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
> -
> -	val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
> -	val &= 0xffe3;
> -	val |= 0x18;
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
> -
> -	/* introduce tx clock delay */
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
> -	val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
> -	val |= 0x0100;
> -	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
> -
> -	return 0;
> -}
> -
> -int board_phy_config(struct phy_device *phydev)
> -{
> -	mx6_rgmii_rework(phydev);
> -
> -	if (phydev->drv->config)
> -		phydev->drv->config(phydev);
> -
> -	return 0;
> -}
> -
>  static void setup_fec(void)
>  {
>  	if (is_mx6dqp()) {
> 

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================