[U-Boot] [PATCH v2] ts4800: update environment to boot with device tree

[Stefano Babic <sbabic@denx.de>]

On 21/04/2016 23:34, Damien Riegel wrote:
> This commit updates the environment variables to be able to boot with a
> device tree. The expected partition layout on the SD card is:
>  - partition 1: type 0xDA, contains u-boot.bin
>  - partition 2: type 0xC (fat), contains zImage and device tree
>  - partition 3: type 0x83, root filesystem.
> 
> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> ---
> Changes in v2:
>  - do not mess with LOADADDR anymore
> 
>  include/configs/ts4800.h | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h
> index fcc9d80..b369b27 100644
> --- a/include/configs/ts4800.h
> +++ b/include/configs/ts4800.h
> @@ -106,19 +106,28 @@
>  
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	"script=boot.scr\0" \
> -	"image=uImage\0" \
> +	"image=zImage\0" \
> +	"fdt_file=imx51-ts4800.dtb\0" \
> +	"fdt_addr=0x90fe0000\0" \
>  	"mmcdev=0\0" \
> -	"mmcpart=1\0" \
> -	"mmcargs=setenv bootargs root=/dev/mmcblk0p2 rootwait rw\0" \
> +	"mmcpart=2\0" \
> +	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
> +	"mmcargs=setenv bootargs root=${mmcroot}\0" \
>  	"addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \
>  	"loadbootscript=" \
>  		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>  	"bootscript=echo Running bootscript from mmc ...; " \
>  		"source\0" \
>  	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \
> +	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
>  	"mmcboot=echo Booting from mmc ...; " \
>  		"run mmcargs addtty; " \
> -                "bootm; "
> +		"if run loadfdt; then " \
> +			"bootz ${loadaddr} - ${fdt_addr}; " \
> +		"else " \
> +			"echo ERR: cannot load FDT; " \
> +		"fi; "
> +
>  
>  #define CONFIG_BOOTCOMMAND \
>  	"mmc dev ${mmcdev}; if mmc rescan; then " \
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================