From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Schwierzeck Date: Thu, 26 May 2016 00:10:11 +0200 Subject: [U-Boot] [PATCH v3 5/5] malta: Use device model & tree for UART In-Reply-To: <1463467408-13245-6-git-send-email-paul.burton@imgtec.com> References: <1463467408-13245-1-git-send-email-paul.burton@imgtec.com> <1463467408-13245-6-git-send-email-paul.burton@imgtec.com> Message-ID: <574622C3.3020508@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 17.05.2016 um 08:43 schrieb Paul Burton: > Make use of device model & device tree to probe the UART driver. This is > the initial step in bringing Malta up to date with driver model, and > allows for cleaner handling of the different I/O addresses for different > system controllers by specifying the ISA bus address instead of a > translated memory address. > > Signed-off-by: Paul Burton > Reviewed-by: Daniel Schwierzeck > --- > > Changes in v3: > - Don't select CONFIG_OF_EMBED for Malta, but add it to defconfigs. > - Add @0 to isa node name to satisfy DTC master. > - Rebase atop u-boot-mips/next. > > Changes in v2: > - Only handle the UART we already use, for simplicity. > > arch/mips/Kconfig | 4 ++++ > arch/mips/dts/Makefile | 1 + > arch/mips/dts/mti,malta.dts | 32 ++++++++++++++++++++++++++++++++ > configs/malta_defconfig | 2 ++ > configs/maltael_defconfig | 2 ++ > include/configs/malta.h | 6 ------ > 6 files changed, 41 insertions(+), 6 deletions(-) > create mode 100644 arch/mips/dts/mti,malta.dts > applied to u-boot-mips, thanks. -- - Daniel -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: OpenPGP digital signature URL: