From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nishanth Menon <nm@ti.com>
Date: Thu, 26 May 2016 10:45:48 -0500
Subject: [U-Boot] [PATCH] ARM: k2g: Configure reset mux to device reset
In-Reply-To: <1464269744-15332-1-git-send-email-lokeshvutla@ti.com>
References: <1464269744-15332-1-git-send-email-lokeshvutla@ti.com>
Message-ID: <57471A2C.3020906@ti.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 05/26/2016 08:35 AM, Lokesh Vutla wrote:
> BOOTCFG_RSTMUX8 register controls the reset mux associated with the ARM.
> Timer5(dedicated to ARM) when used as WatchDog timer, the events it
> generates are routed to the above mux.
> 
> Following are the 3 events that can controlled bt the reset mux:
> - Device Reset
> - An interrupt to the ARM_GIC
> - An interrupt to the ARM_GIC followed by a device reset.
> 
> Right now to give a default watchdog behaviour "Device reset" is
> being selected.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---


Thanks.
Acked-by: Nishanth Menon <nm@ti.com>

>  arch/arm/mach-keystone/include/mach/hardware-k2g.h | 12 ++++++++++++
>  board/ti/ks2_evm/board_k2g.c                       | 16 ++++++++++++++++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/arch/arm/mach-keystone/include/mach/hardware-k2g.h b/arch/arm/mach-keystone/include/mach/hardware-k2g.h
> index ca2a119..0f6bf61 100644
> --- a/arch/arm/mach-keystone/include/mach/hardware-k2g.h
> +++ b/arch/arm/mach-keystone/include/mach/hardware-k2g.h
> @@ -74,4 +74,16 @@
>  #define K2G_GPIO_DIR_OFFSET		0x0
>  #define K2G_GPIO_SETDATA_OFFSET		0x8
>  
> +/* BOOTCFG RESETMUX8 */
> +#define KS2_RSTMUX8			(KS2_DEVICE_STATE_CTRL_BASE + 0x328)
> +
> +/* RESETMUX register definitions */
> +#define RSTMUX_LOCK8_SHIFT		0x0
> +#define RSTMUX_LOCK8_MASK		(0x1 << 0)
> +#define RSTMUX_OMODE8_SHIFT		0x1
> +#define RSTMUX_OMODE8_MASK		(0x7 << 1)
> +#define RSTMUX_OMODE8_DEV_RESET		0x2
> +#define RSTMUX_OMODE8_INT		0x3
> +#define RSTMUX_OMODE8_INT_AND_DEV_RESET	0x4
> +
>  #endif /* __ASM_ARCH_HARDWARE_K2G_H */
> diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
> index b62c412..8f16845 100644
> --- a/board/ti/ks2_evm/board_k2g.c
> +++ b/board/ti/ks2_evm/board_k2g.c
> @@ -117,12 +117,28 @@ int board_mmc_init(bd_t *bis)
>  #endif
>  
>  #ifdef CONFIG_BOARD_EARLY_INIT_F
> +
> +static void k2g_reset_mux_config(void)
> +{
> +	/* Unlock the reset mux register */
> +	clrbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK);
> +
> +	/* Configure BOOTCFG_RSTMUX8 for WDT event to cause a device reset */
> +	clrsetbits_le32(KS2_RSTMUX8, RSTMUX_OMODE8_MASK,
> +			RSTMUX_OMODE8_DEV_RESET << RSTMUX_OMODE8_SHIFT);
> +
> +	/* lock the reset mux register to prevent any spurious writes. */
> +	setbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK);
> +}
> +
>  int board_early_init_f(void)
>  {
>  	init_plls();
>  
>  	k2g_mux_config();
>  
> +	k2g_reset_mux_config();
> +
>  	/* deassert FLASH_HOLD */
>  	clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
>  		     BIT(9));
> 


-- 
Regards,
Nishanth Menon