public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] MIPS: Split I & D cache line size config
Date: Fri, 27 May 2016 13:21:48 +0200	[thread overview]
Message-ID: <57482DCC.1070806@gmail.com> (raw)
In-Reply-To: <57472054.3040207@denx.de>



Am 26.05.2016 um 18:12 schrieb Marek Vasut:
> On 05/26/2016 05:58 PM, Paul Burton wrote:
>> Allow L1 Icache & L1 Dcache line size to be specified separately, since
>> there's no architectural mandate that they be the same. The
>> [id]cache_line_size functions are tidied up to take advantage of the
>> fact that the Kconfig entries are always present to simply check them
>> for zero rather than needing to #ifdef on their presence.
>>
>> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
>> ---
>>
>>  arch/mips/Kconfig            |  6 +++++-
>>  arch/mips/lib/cache.c        | 22 +++++++---------------
>>  arch/mips/lib/cache_init.S   |  4 ++--
>>  board/dbau1x00/Kconfig       |  5 ++++-
>>  board/micronas/vct/Kconfig   |  5 ++++-
>>  board/pb1x00/Kconfig         |  5 ++++-
>>  board/qca/ap121/Kconfig      |  5 ++++-
>>  board/qca/ap143/Kconfig      |  5 ++++-
>>  board/qemu-mips/Kconfig      |  5 ++++-
>>  board/tplink/wdr4300/Kconfig |  5 ++++-
>>  10 files changed, 42 insertions(+), 25 deletions(-)
>>
>> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>> index 13f1164..8af8799 100644
>> --- a/arch/mips/Kconfig
>> +++ b/arch/mips/Kconfig
>> @@ -247,11 +247,15 @@ config SYS_DCACHE_SIZE
>>  	hex
>>  	default 0
>>  
>> +config SYS_DCACHE_LINE_SIZE
>> +	hex
>> +	default 0
>> +
>>  config SYS_ICACHE_SIZE
>>  	hex
>>  	default 0
>>  
>> -config SYS_CACHELINE_SIZE
>> +config SYS_ICACHE_LINE_SIZE
> 
> Be careful here, CONFIG_SYS_CACHELINE_SIZE is established all over the
> u-boot, so this might cause build breakage. You should keep some
> compatibility CONFIG_SYS_CACHELINE_SIZE entry and set it to default to
> SYS_DCACHE_LINE_SIZE , since it's mostly used for DMA anyway.

Marek is right. Some USB drivers still use CONFIG_SYS_CACHELINE_SIZE
instead of ARCH_DMA_MINALIGN so CONFIG_SYS_CACHELINE_SIZE needs to be
kept as Kconfig symbol.

-- 
- Daniel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160527/3e0cdb3d/attachment.sig>

  reply	other threads:[~2016-05-27 11:21 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-26 15:58 [U-Boot] [PATCH 0/3] MIPS cache cleanups Paul Burton
2016-05-26 15:58 ` [U-Boot] [PATCH 1/3] MIPS: Move cache sizes to Kconfig Paul Burton
2016-05-26 16:10   ` Marek Vasut
2016-05-27 10:36     ` Paul Burton
2016-05-27 14:32       ` Marek Vasut
2016-05-27 14:34         ` Paul Burton
2016-05-27 14:40           ` Marek Vasut
2016-05-27 14:54             ` Paul Burton
2016-05-28 12:18               ` Marek Vasut
2016-05-27 15:43             ` Daniel Schwierzeck
2016-05-28 12:03               ` Marek Vasut
2016-05-31 16:21             ` Zubair Lutfullah Kakakhel
2016-05-31  8:00   ` Daniel Schwierzeck
2016-05-26 15:58 ` [U-Boot] [PATCH 2/3] MIPS: Split I & D cache line size config Paul Burton
2016-05-26 16:12   ` Marek Vasut
2016-05-27 11:21     ` Daniel Schwierzeck [this message]
2016-05-31  8:01   ` Daniel Schwierzeck
2016-05-26 15:58 ` [U-Boot] [PATCH 3/3] MIPS: Abstract cache op loops with a macro Paul Burton
2016-05-26 16:13   ` Marek Vasut
2016-05-27 10:30     ` Paul Burton
2016-05-27 14:36       ` Marek Vasut
2016-05-27 14:48         ` Paul Burton
2016-05-28 12:27           ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57482DCC.1070806@gmail.com \
    --to=daniel.schwierzeck@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox