[U-Boot] [PATCH 1/2] drivers/ddr/fsl: Update clk_adjust of sdram_clk_cntl

[York Sun <york.sun@nxp.com>]

On 05/30/2016 08:18 PM, Shengzhou Liu wrote:
> 
>> -----Original Message-----
>> From: York Sun [mailto:york.sun at nxp.com]
>> Sent: Tuesday, May 17, 2016 12:55 AM
>> To: Shengzhou Liu <shengzhou.liu@nxp.com>; u-boot at lists.denx.de
>> Subject: Re: [PATCH 1/2] drivers/ddr/fsl: Update clk_adjust of sdram_clk_cntl
> 
>>
>> Shengzhou,
>>
>> Your understanding is correct. However, we have done analysis that the
>> additional bit is not used for finer adjustment. So unless you have a case
>> requiring values in the middle, I suggest to keep current code.
>>
>> York
> 
> York
> 
> On LS1046RDB, the clk_adj is 9, an odd instead of even data, so we have to update it, and there will be more new boards in future with possibly odd clk_adj.
> 

Shengzhou,

If you have to use an odd number for clk_adj, we can go ahead to merge these
patches. In my experience, clk_adj is very forgivable. If you have only one
value works, there is probably something wrong.

York