[U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings

[Marek Vasut <marex@denx.de>]

On 06/08/2016 11:44 AM, Rajesh Bhagat wrote:
> 
> 
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Monday, June 06, 2016 6:24 PM
>> To: Rajat Srivastava <rajat.srivastava@nxp.com>; u-boot at lists.denx.de
>> Cc: l.majewski at samsung.com; sjg at chromium.org; albert.u.boot at aribaud.net;
>> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Mingkai Hu
>> <mingkai.hu@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>;
>> michal.simek at xilinx.com; felipe.balbi at linux.intel.com
>> Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and
>> burst settings
>>
>> On 06/06/2016 11:16 AM, Rajat Srivastava wrote:
>>> Adds helper functions to enable snooping and outstanding burst beat
>>> settings.
>>>
>>> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
>>> ---
>>> Changes in v2:
>>>  - Removes SoC specific flags and added helper functions
>>>
>>>  drivers/usb/dwc3/core.c | 45
>>> +++++++++++++++++++++++++++++++++++++++++++++
>>>  drivers/usb/dwc3/core.h |  7 +++++++
>>>  2 files changed, 52 insertions(+)
>>>
>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
>>> 85cc96a..0b3c596 100644
>>> --- a/drivers/usb/dwc3/core.c
>>> +++ b/drivers/usb/dwc3/core.c
>>> @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
>>>
>>>  #define DWC3_ALIGN_MASK		(16 - 1)
>>>
>>> +void dwc3_core_incr_burst_enable(int index, int btype_incr_val,
>>> +				 int breq_limit)
>>> +{
>>> +	struct dwc3 *dwc;
>>> +	u32 reg;
>>> +
>>> +	list_for_each_entry(dwc, &dwc3_list, list) {
>>
> 
> Hello Marek, 
> 
>> Why is this iterating over a list of all controllers ?
> 
> This function has to be called from Soc specific code to pass some register settings. And dwc pointer 
> would not be available there. Hence, index is passed to determine dwc pointer. 
> 
>> Should this be enabled on per-controller basis by some DT prop ?
>>
> 
> We are using dwc3 driver with non DT support. 

That's real unfortunate.

> Best Regards,
> Rajesh Bhagat 
> 
>  
>>> +		if (dwc->index != index)
>>> +			continue;
>>> +
>>> +		/*
>>> +		 * Change burst beat and outstanding pipelined
>>> +		 * transfers requests
>>> +		 */
>>> +		reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
>>> +		reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val;
>>> +		dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
>>> +
>>> +		reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1);
>>> +		reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8);
>>> +		dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg);
>>> +		break;
>>> +	}
>>> +}
>>> +
>>> +void dwc3_core_set_snooping(int index, bool snoop) {
>>> +	struct dwc3 *dwc;
>>> +	u32 reg;
>>> +
>>> +	list_for_each_entry(dwc, &dwc3_list, list) {
>>> +		if (dwc->index != index)
>>> +			continue;
>>> +
>>> +		/* Enable/Disable snooping */
>>> +		reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
>>> +		if (snoop)
>>> +			reg = reg | DWC3_SNOOP_ENABLE;
>>> +		else
>>> +			reg = reg & ~DWC3_SNOOP_ENABLE;
>>> +		dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
>>> +		break;
>>> +	}
>>> +}
>>> +
>>>  /**
>>>   * dwc3_uboot_init - dwc3 core uboot initialization code
>>>   * @dwc3_dev: struct dwc3_device containing initialization data diff
>>> --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index
>>> 72d2fcd..455e7fa 100644
>>> --- a/drivers/usb/dwc3/core.h
>>> +++ b/drivers/usb/dwc3/core.h
>>> @@ -593,6 +593,13 @@ struct dwc3_hwparams {
>>>  /* HWPARAMS7 */
>>>  #define DWC3_RAM1_DEPTH(n)	((n) & 0xffff)
>>>
>>> +/* GSBUSCFG0 */
>>> +#define DWC3_SNOOP_ENABLE	(0x22220000)
>>> +#define DWC3_INCR_BTYPE_MASK	(0xff)
>>> +
>>> +/* GSBUSCFG1 */
>>> +#define DWC3_BREQ_LIMIT_MASK	(0xf00)
>>> +
>>>  struct dwc3_request {
>>>  	struct usb_request	request;
>>>  	struct list_head	list;
>>>
>>
>>
>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut