* [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support
@ 2016-06-06 9:16 Rajat Srivastava
2016-06-06 9:16 ` [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava
` (3 more replies)
0 siblings, 4 replies; 22+ messages in thread
From: Rajat Srivastava @ 2016-06-06 9:16 UTC (permalink / raw)
To: u-boot
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Adds support for dwc3 gadget driver for ARM v8 platform of layerscape
series. Currently this patch has been tested for LS1043A
Rajat Srivastava (3):
usb: dwc3: Add helper functions to enable snooping and burst settings
armv8/fsl-layerscape: add dwc3 gadget driver support
armv8/fsl-layerscape: enable dwc3 gadget driver support
Rajesh Bhagat (1):
usb: ums: support multiple controllers using controller_index
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 ++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++
cmd/usb_mass_storage.c | 2 +-
drivers/usb/dwc3/core.c | 45 +++++++++++
drivers/usb/dwc3/core.h | 7 ++
drivers/usb/gadget/f_mass_storage.c | 11 ++-
include/configs/ls1043aqds.h | 15 ++++
include/usb_mass_storage.h | 2 +-
8 files changed, 177 insertions(+), 4 deletions(-)
--
2.6.2.198.g614a2ac
^ permalink raw reply [flat|nested] 22+ messages in thread* [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index 2016-06-06 9:16 [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava @ 2016-06-06 9:16 ` Rajat Srivastava 2016-06-23 14:44 ` Lukasz Majewski 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava ` (2 subsequent siblings) 3 siblings, 1 reply; 22+ messages in thread From: Rajat Srivastava @ 2016-06-06 9:16 UTC (permalink / raw) To: u-boot From: Rajesh Bhagat <rajesh.bhagat@nxp.com> Adds a new field in fsg_common namely controller_index to support multiple controllers usb gadget support. Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> --- Changes for v2: - Changes type of fsg_main_thread argument to unsigned int cmd/usb_mass_storage.c | 2 +- drivers/usb/gadget/f_mass_storage.c | 11 +++++++++-- include/usb_mass_storage.h | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c index b05913a..bf80d37 100644 --- a/cmd/usb_mass_storage.c +++ b/cmd/usb_mass_storage.c @@ -214,7 +214,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag, while (1) { usb_gadget_handle_interrupts(controller_index); - rc = fsg_main_thread(NULL); + rc = fsg_main_thread(controller_index); if (rc) { /* Check I/O error */ if (rc == -EIO) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 1ecb92a..27ca5fe 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -362,6 +362,7 @@ struct fsg_common { char inquiry_string[8 + 16 + 4 + 1]; struct kref ref; + unsigned int controller_index; }; struct fsg_config { @@ -691,7 +692,7 @@ static int sleep_thread(struct fsg_common *common) k = 0; } - usb_gadget_handle_interrupts(0); + usb_gadget_handle_interrupts(common->controller_index); } common->thread_wakeup_needed = 0; return rc; @@ -2402,10 +2403,14 @@ static void handle_exception(struct fsg_common *common) /*-------------------------------------------------------------------------*/ -int fsg_main_thread(void *common_) +int fsg_main_thread(unsigned int controller_index) { int ret; struct fsg_common *common = the_fsg_common; + + /* update the controller_index */ + common->controller_index = controller_index; + /* The main loop */ do { if (exception_in_progress(common)) { @@ -2476,6 +2481,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, common->ops = NULL; common->private_data = NULL; + common->controller_index = 0; common->gadget = gadget; common->ep0 = gadget->ep0; @@ -2770,6 +2776,7 @@ int fsg_add(struct usb_configuration *c) fsg_common->ops = NULL; fsg_common->private_data = NULL; + fsg_common->controller_index = 0; the_fsg_common = fsg_common; diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h index 8229f62..f21cc7a 100644 --- a/include/usb_mass_storage.h +++ b/include/usb_mass_storage.h @@ -28,6 +28,6 @@ struct ums { int fsg_init(struct ums *ums_devs, int count); void fsg_cleanup(void); -int fsg_main_thread(void *); +int fsg_main_thread(unsigned int); int fsg_add(struct usb_configuration *c); #endif /* __USB_MASS_STORAGE_H__ */ -- 2.6.2.198.g614a2ac ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index 2016-06-06 9:16 ` [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava @ 2016-06-23 14:44 ` Lukasz Majewski 0 siblings, 0 replies; 22+ messages in thread From: Lukasz Majewski @ 2016-06-23 14:44 UTC (permalink / raw) To: u-boot Hi Rajat, First of all, sorry for late reply. I was not in the office. > From: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > Adds a new field in fsg_common namely controller_index to support > multiple controllers usb gadget support. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > --- > Changes for v2: > - Changes type of fsg_main_thread argument to unsigned int > > cmd/usb_mass_storage.c | 2 +- > drivers/usb/gadget/f_mass_storage.c | 11 +++++++++-- > include/usb_mass_storage.h | 2 +- > 3 files changed, 11 insertions(+), 4 deletions(-) > > diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c > index b05913a..bf80d37 100644 > --- a/cmd/usb_mass_storage.c > +++ b/cmd/usb_mass_storage.c > @@ -214,7 +214,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int > flag, while (1) { > usb_gadget_handle_interrupts(controller_index); > > - rc = fsg_main_thread(NULL); > + rc = fsg_main_thread(controller_index); > if (rc) { > /* Check I/O error */ > if (rc == -EIO) > diff --git a/drivers/usb/gadget/f_mass_storage.c > b/drivers/usb/gadget/f_mass_storage.c index 1ecb92a..27ca5fe 100644 > --- a/drivers/usb/gadget/f_mass_storage.c > +++ b/drivers/usb/gadget/f_mass_storage.c > @@ -362,6 +362,7 @@ struct fsg_common { > char inquiry_string[8 + 16 + 4 + 1]; > > struct kref ref; > + unsigned int controller_index; > }; > > struct fsg_config { > @@ -691,7 +692,7 @@ static int sleep_thread(struct fsg_common *common) > k = 0; > } > > - usb_gadget_handle_interrupts(0); > + > usb_gadget_handle_interrupts(common->controller_index); } > common->thread_wakeup_needed = 0; > return rc; > @@ -2402,10 +2403,14 @@ static void handle_exception(struct > fsg_common *common) > /*-------------------------------------------------------------------------*/ > > -int fsg_main_thread(void *common_) > +int fsg_main_thread(unsigned int controller_index) > { > int ret; > struct fsg_common *common = the_fsg_common; > + > + /* update the controller_index */ > + common->controller_index = controller_index; > + > /* The main loop */ > do { > if (exception_in_progress(common)) { > @@ -2476,6 +2481,7 @@ static struct fsg_common > *fsg_common_init(struct fsg_common *common, > common->ops = NULL; > common->private_data = NULL; > + common->controller_index = 0; > > common->gadget = gadget; > common->ep0 = gadget->ep0; > @@ -2770,6 +2776,7 @@ int fsg_add(struct usb_configuration *c) > > fsg_common->ops = NULL; > fsg_common->private_data = NULL; > + fsg_common->controller_index = 0; > > the_fsg_common = fsg_common; > > diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h > index 8229f62..f21cc7a 100644 > --- a/include/usb_mass_storage.h > +++ b/include/usb_mass_storage.h > @@ -28,6 +28,6 @@ struct ums { > > int fsg_init(struct ums *ums_devs, int count); > void fsg_cleanup(void); > -int fsg_main_thread(void *); > +int fsg_main_thread(unsigned int); > int fsg_add(struct usb_configuration *c); > #endif /* __USB_MASS_STORAGE_H__ */ Acked-by: Lukasz Majewski <l.majewski@samsung.com> -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-06 9:16 [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-06 9:16 ` [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava @ 2016-06-06 9:16 ` Rajat Srivastava 2016-06-06 12:54 ` Marek Vasut ` (2 more replies) 2016-06-06 9:16 ` [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-06 9:16 ` [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable " Rajat Srivastava 3 siblings, 3 replies; 22+ messages in thread From: Rajat Srivastava @ 2016-06-06 9:16 UTC (permalink / raw) To: u-boot Adds helper functions to enable snooping and outstanding burst beat settings. Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> --- Changes in v2: - Removes SoC specific flags and added helper functions drivers/usb/dwc3/core.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 7 +++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 85cc96a..0b3c596 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) #define DWC3_ALIGN_MASK (16 - 1) +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, + int breq_limit) +{ + struct dwc3 *dwc; + u32 reg; + + list_for_each_entry(dwc, &dwc3_list, list) { + if (dwc->index != index) + continue; + + /* + * Change burst beat and outstanding pipelined + * transfers requests + */ + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); + + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); + break; + } +} + +void dwc3_core_set_snooping(int index, bool snoop) +{ + struct dwc3 *dwc; + u32 reg; + + list_for_each_entry(dwc, &dwc3_list, list) { + if (dwc->index != index) + continue; + + /* Enable/Disable snooping */ + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); + if (snoop) + reg = reg | DWC3_SNOOP_ENABLE; + else + reg = reg & ~DWC3_SNOOP_ENABLE; + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); + break; + } +} + /** * dwc3_uboot_init - dwc3 core uboot initialization code * @dwc3_dev: struct dwc3_device containing initialization data diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 72d2fcd..455e7fa 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -593,6 +593,13 @@ struct dwc3_hwparams { /* HWPARAMS7 */ #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) +/* GSBUSCFG0 */ +#define DWC3_SNOOP_ENABLE (0x22220000) +#define DWC3_INCR_BTYPE_MASK (0xff) + +/* GSBUSCFG1 */ +#define DWC3_BREQ_LIMIT_MASK (0xf00) + struct dwc3_request { struct usb_request request; struct list_head list; -- 2.6.2.198.g614a2ac ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava @ 2016-06-06 12:54 ` Marek Vasut 2016-06-08 9:44 ` Rajesh Bhagat 2016-06-10 0:34 ` Simon Glass 2016-06-23 14:53 ` Lukasz Majewski 2 siblings, 1 reply; 22+ messages in thread From: Marek Vasut @ 2016-06-06 12:54 UTC (permalink / raw) To: u-boot On 06/06/2016 11:16 AM, Rajat Srivastava wrote: > Adds helper functions to enable snooping and outstanding burst beat > settings. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > --- > Changes in v2: > - Removes SoC specific flags and added helper functions > > drivers/usb/dwc3/core.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/dwc3/core.h | 7 +++++++ > 2 files changed, 52 insertions(+) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 85cc96a..0b3c596 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > #define DWC3_ALIGN_MASK (16 - 1) > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > + int breq_limit) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { Why is this iterating over a list of all controllers ? Should this be enabled on per-controller basis by some DT prop ? > + if (dwc->index != index) > + continue; > + > + /* > + * Change burst beat and outstanding pipelined > + * transfers requests > + */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > + break; > + } > +} > + > +void dwc3_core_set_snooping(int index, bool snoop) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { > + if (dwc->index != index) > + continue; > + > + /* Enable/Disable snooping */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + if (snoop) > + reg = reg | DWC3_SNOOP_ENABLE; > + else > + reg = reg & ~DWC3_SNOOP_ENABLE; > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + break; > + } > +} > + > /** > * dwc3_uboot_init - dwc3 core uboot initialization code > * @dwc3_dev: struct dwc3_device containing initialization data > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 72d2fcd..455e7fa 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > /* HWPARAMS7 */ > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > +/* GSBUSCFG0 */ > +#define DWC3_SNOOP_ENABLE (0x22220000) > +#define DWC3_INCR_BTYPE_MASK (0xff) > + > +/* GSBUSCFG1 */ > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > + > struct dwc3_request { > struct usb_request request; > struct list_head list; > -- Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-06 12:54 ` Marek Vasut @ 2016-06-08 9:44 ` Rajesh Bhagat 2016-06-08 13:26 ` Marek Vasut 0 siblings, 1 reply; 22+ messages in thread From: Rajesh Bhagat @ 2016-06-08 9:44 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Marek Vasut [mailto:marex at denx.de] > Sent: Monday, June 06, 2016 6:24 PM > To: Rajat Srivastava <rajat.srivastava@nxp.com>; u-boot at lists.denx.de > Cc: l.majewski at samsung.com; sjg at chromium.org; albert.u.boot at aribaud.net; > prabhakar at freescale.com; york sun <york.sun@nxp.com>; Mingkai Hu > <mingkai.hu@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>; > michal.simek at xilinx.com; felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and > burst settings > > On 06/06/2016 11:16 AM, Rajat Srivastava wrote: > > Adds helper functions to enable snooping and outstanding burst beat > > settings. > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > --- > > Changes in v2: > > - Removes SoC specific flags and added helper functions > > > > drivers/usb/dwc3/core.c | 45 > > +++++++++++++++++++++++++++++++++++++++++++++ > > drivers/usb/dwc3/core.h | 7 +++++++ > > 2 files changed, 52 insertions(+) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > > 85cc96a..0b3c596 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > > > #define DWC3_ALIGN_MASK (16 - 1) > > > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > > + int breq_limit) > > +{ > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { > Hello Marek, > Why is this iterating over a list of all controllers ? This function has to be called from Soc specific code to pass some register settings. And dwc pointer would not be available there. Hence, index is passed to determine dwc pointer. > Should this be enabled on per-controller basis by some DT prop ? > We are using dwc3 driver with non DT support. Best Regards, Rajesh Bhagat > > + if (dwc->index != index) > > + continue; > > + > > + /* > > + * Change burst beat and outstanding pipelined > > + * transfers requests > > + */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > > + break; > > + } > > +} > > + > > +void dwc3_core_set_snooping(int index, bool snoop) { > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { > > + if (dwc->index != index) > > + continue; > > + > > + /* Enable/Disable snooping */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + if (snoop) > > + reg = reg | DWC3_SNOOP_ENABLE; > > + else > > + reg = reg & ~DWC3_SNOOP_ENABLE; > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + break; > > + } > > +} > > + > > /** > > * dwc3_uboot_init - dwc3 core uboot initialization code > > * @dwc3_dev: struct dwc3_device containing initialization data diff > > --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index > > 72d2fcd..455e7fa 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > > /* HWPARAMS7 */ > > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > > > +/* GSBUSCFG0 */ > > +#define DWC3_SNOOP_ENABLE (0x22220000) > > +#define DWC3_INCR_BTYPE_MASK (0xff) > > + > > +/* GSBUSCFG1 */ > > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > > + > > struct dwc3_request { > > struct usb_request request; > > struct list_head list; > > > > > -- > Best regards, > Marek Vasut ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-08 9:44 ` Rajesh Bhagat @ 2016-06-08 13:26 ` Marek Vasut 0 siblings, 0 replies; 22+ messages in thread From: Marek Vasut @ 2016-06-08 13:26 UTC (permalink / raw) To: u-boot On 06/08/2016 11:44 AM, Rajesh Bhagat wrote: > > >> -----Original Message----- >> From: Marek Vasut [mailto:marex at denx.de] >> Sent: Monday, June 06, 2016 6:24 PM >> To: Rajat Srivastava <rajat.srivastava@nxp.com>; u-boot at lists.denx.de >> Cc: l.majewski at samsung.com; sjg at chromium.org; albert.u.boot at aribaud.net; >> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Mingkai Hu >> <mingkai.hu@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>; >> michal.simek at xilinx.com; felipe.balbi at linux.intel.com >> Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and >> burst settings >> >> On 06/06/2016 11:16 AM, Rajat Srivastava wrote: >>> Adds helper functions to enable snooping and outstanding burst beat >>> settings. >>> >>> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> >>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> >>> --- >>> Changes in v2: >>> - Removes SoC specific flags and added helper functions >>> >>> drivers/usb/dwc3/core.c | 45 >>> +++++++++++++++++++++++++++++++++++++++++++++ >>> drivers/usb/dwc3/core.h | 7 +++++++ >>> 2 files changed, 52 insertions(+) >>> >>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index >>> 85cc96a..0b3c596 100644 >>> --- a/drivers/usb/dwc3/core.c >>> +++ b/drivers/usb/dwc3/core.c >>> @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) >>> >>> #define DWC3_ALIGN_MASK (16 - 1) >>> >>> +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, >>> + int breq_limit) >>> +{ >>> + struct dwc3 *dwc; >>> + u32 reg; >>> + >>> + list_for_each_entry(dwc, &dwc3_list, list) { >> > > Hello Marek, > >> Why is this iterating over a list of all controllers ? > > This function has to be called from Soc specific code to pass some register settings. And dwc pointer > would not be available there. Hence, index is passed to determine dwc pointer. > >> Should this be enabled on per-controller basis by some DT prop ? >> > > We are using dwc3 driver with non DT support. That's real unfortunate. > Best Regards, > Rajesh Bhagat > > >>> + if (dwc->index != index) >>> + continue; >>> + >>> + /* >>> + * Change burst beat and outstanding pipelined >>> + * transfers requests >>> + */ >>> + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); >>> + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; >>> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); >>> + >>> + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); >>> + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); >>> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); >>> + break; >>> + } >>> +} >>> + >>> +void dwc3_core_set_snooping(int index, bool snoop) { >>> + struct dwc3 *dwc; >>> + u32 reg; >>> + >>> + list_for_each_entry(dwc, &dwc3_list, list) { >>> + if (dwc->index != index) >>> + continue; >>> + >>> + /* Enable/Disable snooping */ >>> + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); >>> + if (snoop) >>> + reg = reg | DWC3_SNOOP_ENABLE; >>> + else >>> + reg = reg & ~DWC3_SNOOP_ENABLE; >>> + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); >>> + break; >>> + } >>> +} >>> + >>> /** >>> * dwc3_uboot_init - dwc3 core uboot initialization code >>> * @dwc3_dev: struct dwc3_device containing initialization data diff >>> --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index >>> 72d2fcd..455e7fa 100644 >>> --- a/drivers/usb/dwc3/core.h >>> +++ b/drivers/usb/dwc3/core.h >>> @@ -593,6 +593,13 @@ struct dwc3_hwparams { >>> /* HWPARAMS7 */ >>> #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) >>> >>> +/* GSBUSCFG0 */ >>> +#define DWC3_SNOOP_ENABLE (0x22220000) >>> +#define DWC3_INCR_BTYPE_MASK (0xff) >>> + >>> +/* GSBUSCFG1 */ >>> +#define DWC3_BREQ_LIMIT_MASK (0xf00) >>> + >>> struct dwc3_request { >>> struct usb_request request; >>> struct list_head list; >>> >> >> >> -- >> Best regards, >> Marek Vasut -- Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava 2016-06-06 12:54 ` Marek Vasut @ 2016-06-10 0:34 ` Simon Glass 2016-06-14 4:09 ` Rajesh Bhagat 2016-06-23 14:53 ` Lukasz Majewski 2 siblings, 1 reply; 22+ messages in thread From: Simon Glass @ 2016-06-10 0:34 UTC (permalink / raw) To: u-boot Hi, On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: > Adds helper functions to enable snooping and outstanding burst beat > settings. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > --- > Changes in v2: > - Removes SoC specific flags and added helper functions > > drivers/usb/dwc3/core.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/dwc3/core.h | 7 +++++++ > 2 files changed, 52 insertions(+) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 85cc96a..0b3c596 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > #define DWC3_ALIGN_MASK (16 - 1) > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > + int breq_limit) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { Ick - can this be converted to use driver model? > + if (dwc->index != index) > + continue; > + > + /* > + * Change burst beat and outstanding pipelined > + * transfers requests > + */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > + break; > + } > +} > + > +void dwc3_core_set_snooping(int index, bool snoop) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { > + if (dwc->index != index) > + continue; > + > + /* Enable/Disable snooping */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + if (snoop) > + reg = reg | DWC3_SNOOP_ENABLE; > + else > + reg = reg & ~DWC3_SNOOP_ENABLE; > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + break; > + } > +} > + > /** > * dwc3_uboot_init - dwc3 core uboot initialization code > * @dwc3_dev: struct dwc3_device containing initialization data > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 72d2fcd..455e7fa 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > /* HWPARAMS7 */ > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > +/* GSBUSCFG0 */ > +#define DWC3_SNOOP_ENABLE (0x22220000) > +#define DWC3_INCR_BTYPE_MASK (0xff) > + > +/* GSBUSCFG1 */ > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > + > struct dwc3_request { > struct usb_request request; > struct list_head list; > -- > 2.6.2.198.g614a2ac > Regards, Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-10 0:34 ` Simon Glass @ 2016-06-14 4:09 ` Rajesh Bhagat 2016-06-17 3:51 ` Simon Glass 0 siblings, 1 reply; 22+ messages in thread From: Rajesh Bhagat @ 2016-06-14 4:09 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass > Sent: Friday, June 10, 2016 6:05 AM > To: Rajat Srivastava <rajat.srivastava@nxp.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Lukasz Majewski > <l.majewski@samsung.com>; Marek Va?ut <marex@denx.de>; Albert ARIBAUD > <albert.u.boot@aribaud.net>; Prabhakar Kushwaha <prabhakar@freescale.com>; > york sun <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat > <rajesh.bhagat@nxp.com>; Michal Simek <michal.simek@xilinx.com>; > felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and > burst settings > > Hi, > > On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: > > Adds helper functions to enable snooping and outstanding burst beat > > settings. > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > --- > > Changes in v2: > > - Removes SoC specific flags and added helper functions > > > > drivers/usb/dwc3/core.c | 45 > > +++++++++++++++++++++++++++++++++++++++++++++ > > drivers/usb/dwc3/core.h | 7 +++++++ > > 2 files changed, 52 insertions(+) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > > 85cc96a..0b3c596 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > > > #define DWC3_ALIGN_MASK (16 - 1) > > > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > > + int breq_limit) { > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { Hello Simon, > > Ick - can this be converted to use driver model? > We have not moved to use driver model yet :( . Is it possible to pass these register settings by some other mechanism ? Best Regards, Rajesh Bhagat > > + if (dwc->index != index) > > + continue; > > + > > + /* > > + * Change burst beat and outstanding pipelined > > + * transfers requests > > + */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > > + break; > > + } > > +} > > + > > +void dwc3_core_set_snooping(int index, bool snoop) { > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { > > + if (dwc->index != index) > > + continue; > > + > > + /* Enable/Disable snooping */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + if (snoop) > > + reg = reg | DWC3_SNOOP_ENABLE; > > + else > > + reg = reg & ~DWC3_SNOOP_ENABLE; > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + break; > > + } > > +} > > + > > /** > > * dwc3_uboot_init - dwc3 core uboot initialization code > > * @dwc3_dev: struct dwc3_device containing initialization data diff > > --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index > > 72d2fcd..455e7fa 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > > /* HWPARAMS7 */ > > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > > > +/* GSBUSCFG0 */ > > +#define DWC3_SNOOP_ENABLE (0x22220000) > > +#define DWC3_INCR_BTYPE_MASK (0xff) > > + > > +/* GSBUSCFG1 */ > > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > > + > > struct dwc3_request { > > struct usb_request request; > > struct list_head list; > > -- > > 2.6.2.198.g614a2ac > > > > Regards, > Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-14 4:09 ` Rajesh Bhagat @ 2016-06-17 3:51 ` Simon Glass 2016-07-04 4:33 ` Rajesh Bhagat 0 siblings, 1 reply; 22+ messages in thread From: Simon Glass @ 2016-06-17 3:51 UTC (permalink / raw) To: u-boot Hi Rajesh, On 13 June 2016 at 22:09, Rajesh Bhagat <rajesh.bhagat@nxp.com> wrote: > > >> -----Original Message----- >> From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass >> Sent: Friday, June 10, 2016 6:05 AM >> To: Rajat Srivastava <rajat.srivastava@nxp.com> >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Lukasz Majewski >> <l.majewski@samsung.com>; Marek Va?ut <marex@denx.de>; Albert ARIBAUD >> <albert.u.boot@aribaud.net>; Prabhakar Kushwaha <prabhakar@freescale.com>; >> york sun <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat >> <rajesh.bhagat@nxp.com>; Michal Simek <michal.simek@xilinx.com>; >> felipe.balbi at linux.intel.com >> Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and >> burst settings >> >> Hi, >> >> On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: >> > Adds helper functions to enable snooping and outstanding burst beat >> > settings. >> > >> > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> >> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> >> > --- >> > Changes in v2: >> > - Removes SoC specific flags and added helper functions >> > >> > drivers/usb/dwc3/core.c | 45 >> > +++++++++++++++++++++++++++++++++++++++++++++ >> > drivers/usb/dwc3/core.h | 7 +++++++ >> > 2 files changed, 52 insertions(+) >> > >> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index >> > 85cc96a..0b3c596 100644 >> > --- a/drivers/usb/dwc3/core.c >> > +++ b/drivers/usb/dwc3/core.c >> > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) >> > >> > #define DWC3_ALIGN_MASK (16 - 1) >> > >> > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, >> > + int breq_limit) { >> > + struct dwc3 *dwc; >> > + u32 reg; >> > + >> > + list_for_each_entry(dwc, &dwc3_list, list) { > > Hello Simon, > >> >> Ick - can this be converted to use driver model? >> > > We have not moved to use driver model yet :( . Is it possible to pass these > register settings by some other mechanism ? Not that I know of - is there any reason not to convert to driver model now? > > Best Regards, > Rajesh Bhagat > >> > + if (dwc->index != index) >> > + continue; >> > + >> > + /* >> > + * Change burst beat and outstanding pipelined >> > + * transfers requests >> > + */ >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); >> > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); >> > + >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); >> > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); >> > + break; >> > + } >> > +} >> > + >> > +void dwc3_core_set_snooping(int index, bool snoop) { >> > + struct dwc3 *dwc; >> > + u32 reg; >> > + >> > + list_for_each_entry(dwc, &dwc3_list, list) { >> > + if (dwc->index != index) >> > + continue; >> > + >> > + /* Enable/Disable snooping */ >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); >> > + if (snoop) >> > + reg = reg | DWC3_SNOOP_ENABLE; >> > + else >> > + reg = reg & ~DWC3_SNOOP_ENABLE; >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); >> > + break; >> > + } >> > +} >> > + >> > /** >> > * dwc3_uboot_init - dwc3 core uboot initialization code >> > * @dwc3_dev: struct dwc3_device containing initialization data diff >> > --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index >> > 72d2fcd..455e7fa 100644 >> > --- a/drivers/usb/dwc3/core.h >> > +++ b/drivers/usb/dwc3/core.h >> > @@ -593,6 +593,13 @@ struct dwc3_hwparams { >> > /* HWPARAMS7 */ >> > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) >> > >> > +/* GSBUSCFG0 */ >> > +#define DWC3_SNOOP_ENABLE (0x22220000) >> > +#define DWC3_INCR_BTYPE_MASK (0xff) >> > + >> > +/* GSBUSCFG1 */ >> > +#define DWC3_BREQ_LIMIT_MASK (0xf00) >> > + >> > struct dwc3_request { >> > struct usb_request request; >> > struct list_head list; >> > -- >> > 2.6.2.198.g614a2ac >> > >> >> Regards, >> Simon Regards, Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-17 3:51 ` Simon Glass @ 2016-07-04 4:33 ` Rajesh Bhagat 0 siblings, 0 replies; 22+ messages in thread From: Rajesh Bhagat @ 2016-07-04 4:33 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass > Sent: Friday, June 17, 2016 9:22 AM > To: Rajesh Bhagat <rajesh.bhagat@nxp.com> > Cc: Rajat Srivastava <rajat.srivastava@nxp.com>; U-Boot Mailing List <u- > boot at lists.denx.de>; Lukasz Majewski <l.majewski@samsung.com>; Marek Va?ut > <marex@denx.de>; Albert ARIBAUD <albert.u.boot@aribaud.net>; Prabhakar > Kushwaha <prabhakar@freescale.com>; york sun <york.sun@nxp.com>; Mingkai Hu > <mingkai.hu@nxp.com>; Michal Simek <michal.simek@xilinx.com>; > felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and > burst settings > > Hi Rajesh, > > On 13 June 2016 at 22:09, Rajesh Bhagat <rajesh.bhagat@nxp.com> wrote: > > > > > >> -----Original Message----- > >> From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass > >> Sent: Friday, June 10, 2016 6:05 AM > >> To: Rajat Srivastava <rajat.srivastava@nxp.com> > >> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Lukasz Majewski > >> <l.majewski@samsung.com>; Marek Va?ut <marex@denx.de>; Albert ARIBAUD > >> <albert.u.boot@aribaud.net>; Prabhakar Kushwaha > >> <prabhakar@freescale.com>; york sun <york.sun@nxp.com>; Mingkai Hu > >> <mingkai.hu@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>; Michal > >> Simek <michal.simek@xilinx.com>; felipe.balbi at linux.intel.com > >> Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable > >> snooping and burst settings > >> > >> Hi, > >> > >> On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: > >> > Adds helper functions to enable snooping and outstanding burst beat > >> > settings. > >> > > >> > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > >> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > >> > --- > >> > Changes in v2: > >> > - Removes SoC specific flags and added helper functions > >> > > >> > drivers/usb/dwc3/core.c | 45 > >> > +++++++++++++++++++++++++++++++++++++++++++++ > >> > drivers/usb/dwc3/core.h | 7 +++++++ > >> > 2 files changed, 52 insertions(+) > >> > > >> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > >> > index > >> > 85cc96a..0b3c596 100644 > >> > --- a/drivers/usb/dwc3/core.c > >> > +++ b/drivers/usb/dwc3/core.c > >> > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 > >> > *dwc) > >> > > >> > #define DWC3_ALIGN_MASK (16 - 1) > >> > > >> > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > >> > + int breq_limit) { > >> > + struct dwc3 *dwc; > >> > + u32 reg; > >> > + > >> > + list_for_each_entry(dwc, &dwc3_list, list) { > > > > Hello Simon, > > > >> > >> Ick - can this be converted to use driver model? > >> > > > > We have not moved to use driver model yet :( . Is it possible to pass > > these register settings by some other mechanism ? > Hello Simon, > Not that I know of - is there any reason not to convert to driver model now? > Reason is, the dwc3 driver itself as not moved to CONFIG_DM_USB, and seems to be in progress by patch "driver model bring-up of dwc3 usb peripheral" (sent by Mugunthan V N). Best Regards, Rajesh Bhagat > > > > Best Regards, > > Rajesh Bhagat > > > >> > + if (dwc->index != index) > >> > + continue; > >> > + > >> > + /* > >> > + * Change burst beat and outstanding pipelined > >> > + * transfers requests > >> > + */ > >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > >> > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > >> > + > >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > >> > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << 8); > >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > >> > + break; > >> > + } > >> > +} > >> > + > >> > +void dwc3_core_set_snooping(int index, bool snoop) { > >> > + struct dwc3 *dwc; > >> > + u32 reg; > >> > + > >> > + list_for_each_entry(dwc, &dwc3_list, list) { > >> > + if (dwc->index != index) > >> > + continue; > >> > + > >> > + /* Enable/Disable snooping */ > >> > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > >> > + if (snoop) > >> > + reg = reg | DWC3_SNOOP_ENABLE; > >> > + else > >> > + reg = reg & ~DWC3_SNOOP_ENABLE; > >> > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > >> > + break; > >> > + } > >> > +} > >> > + > >> > /** > >> > * dwc3_uboot_init - dwc3 core uboot initialization code > >> > * @dwc3_dev: struct dwc3_device containing initialization data > >> > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > >> > index 72d2fcd..455e7fa 100644 > >> > --- a/drivers/usb/dwc3/core.h > >> > +++ b/drivers/usb/dwc3/core.h > >> > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > >> > /* HWPARAMS7 */ > >> > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > >> > > >> > +/* GSBUSCFG0 */ > >> > +#define DWC3_SNOOP_ENABLE (0x22220000) > >> > +#define DWC3_INCR_BTYPE_MASK (0xff) > >> > + > >> > +/* GSBUSCFG1 */ > >> > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > >> > + > >> > struct dwc3_request { > >> > struct usb_request request; > >> > struct list_head list; > >> > -- > >> > 2.6.2.198.g614a2ac > >> > > >> > >> Regards, > >> Simon > > Regards, > Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava 2016-06-06 12:54 ` Marek Vasut 2016-06-10 0:34 ` Simon Glass @ 2016-06-23 14:53 ` Lukasz Majewski 2016-07-04 4:37 ` Rajesh Bhagat 2 siblings, 1 reply; 22+ messages in thread From: Lukasz Majewski @ 2016-06-23 14:53 UTC (permalink / raw) To: u-boot Hi Rajat, > Adds helper functions to enable snooping and outstanding burst beat > settings. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > --- > Changes in v2: > - Removes SoC specific flags and added helper functions > > drivers/usb/dwc3/core.c | 45 > +++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h > | 7 +++++++ 2 files changed, 52 insertions(+) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 85cc96a..0b3c596 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > #define DWC3_ALIGN_MASK (16 - 1) > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > + int breq_limit) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { > + if (dwc->index != index) > + continue; > + > + /* > + * Change burst beat and outstanding pipelined > + * transfers requests > + */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << > 8); > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > + break; > + } > +} > + > +void dwc3_core_set_snooping(int index, bool snoop) > +{ > + struct dwc3 *dwc; > + u32 reg; > + > + list_for_each_entry(dwc, &dwc3_list, list) { > + if (dwc->index != index) > + continue; > + > + /* Enable/Disable snooping */ > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > + if (snoop) > + reg = reg | DWC3_SNOOP_ENABLE; You can replace the above line with reg |= DWC3_SNOOP_ENABLE > + else > + reg = reg & ~DWC3_SNOOP_ENABLE; The same here - req &= ~DWC3_SNOOP_ENABLE > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > + break; > + } > +} > + > /** > * dwc3_uboot_init - dwc3 core uboot initialization code > * @dwc3_dev: struct dwc3_device containing initialization data > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 72d2fcd..455e7fa 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > /* HWPARAMS7 */ > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > +/* GSBUSCFG0 */ > +#define DWC3_SNOOP_ENABLE (0x22220000) > +#define DWC3_INCR_BTYPE_MASK (0xff) > + > +/* GSBUSCFG1 */ > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > + > struct dwc3_request { > struct usb_request request; > struct list_head list; -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-06-23 14:53 ` Lukasz Majewski @ 2016-07-04 4:37 ` Rajesh Bhagat 2016-07-27 17:00 ` york sun 0 siblings, 1 reply; 22+ messages in thread From: Rajesh Bhagat @ 2016-07-04 4:37 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Lukasz Majewski [mailto:l.majewski at samsung.com] > Sent: Thursday, June 23, 2016 8:23 PM > To: Rajat Srivastava <rajat.srivastava@nxp.com> > Cc: u-boot at lists.denx.de; sjg at chromium.org; marex at denx.de; > albert.u.boot at aribaud.net; prabhakar at freescale.com; york sun > <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat > <rajesh.bhagat@nxp.com>; michal.simek at xilinx.com; felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and > burst settings > > Hi Rajat, > > > Adds helper functions to enable snooping and outstanding burst beat > > settings. > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > --- > > Changes in v2: > > - Removes SoC specific flags and added helper functions > > > > drivers/usb/dwc3/core.c | 45 > > +++++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/dwc3/core.h > > | 7 +++++++ 2 files changed, 52 insertions(+) > > > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > > 85cc96a..0b3c596 100644 > > --- a/drivers/usb/dwc3/core.c > > +++ b/drivers/usb/dwc3/core.c > > @@ -599,6 +599,51 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) > > > > #define DWC3_ALIGN_MASK (16 - 1) > > > > +void dwc3_core_incr_burst_enable(int index, int btype_incr_val, > > + int breq_limit) > > +{ > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { > > + if (dwc->index != index) > > + continue; > > + > > + /* > > + * Change burst beat and outstanding pipelined > > + * transfers requests > > + */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + reg = (reg & ~DWC3_INCR_BTYPE_MASK) | btype_incr_val; > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG1); > > + reg = (reg & ~DWC3_BREQ_LIMIT_MASK) | (breq_limit << > > 8); > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, reg); > > + break; > > + } > > +} > > + > > +void dwc3_core_set_snooping(int index, bool snoop) { > > + struct dwc3 *dwc; > > + u32 reg; > > + > > + list_for_each_entry(dwc, &dwc3_list, list) { > > + if (dwc->index != index) > > + continue; > > + > > + /* Enable/Disable snooping */ > > + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); > > + if (snoop) > > + reg = reg | DWC3_SNOOP_ENABLE; Hello Lukasz, > > You can replace the above line with reg |= DWC3_SNOOP_ENABLE > Will take care in v3. > > + else > > + reg = reg & ~DWC3_SNOOP_ENABLE; > > The same here - req &= ~DWC3_SNOOP_ENABLE > Will take care in v3. > > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg); > > + break; > > + } > > +} > > + > > /** > > * dwc3_uboot_init - dwc3 core uboot initialization code > > * @dwc3_dev: struct dwc3_device containing initialization data diff > > --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index > > 72d2fcd..455e7fa 100644 > > --- a/drivers/usb/dwc3/core.h > > +++ b/drivers/usb/dwc3/core.h > > @@ -593,6 +593,13 @@ struct dwc3_hwparams { > > /* HWPARAMS7 */ > > #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) > > > > +/* GSBUSCFG0 */ > > +#define DWC3_SNOOP_ENABLE (0x22220000) > > +#define DWC3_INCR_BTYPE_MASK (0xff) > > + > > +/* GSBUSCFG1 */ > > +#define DWC3_BREQ_LIMIT_MASK (0xf00) > > + > > struct dwc3_request { > > struct usb_request request; > > struct list_head list; > > Best Regards, Rajesh Bhagat > > -- > Best regards, > > Lukasz Majewski > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings 2016-07-04 4:37 ` Rajesh Bhagat @ 2016-07-27 17:00 ` york sun 0 siblings, 0 replies; 22+ messages in thread From: york sun @ 2016-07-27 17:00 UTC (permalink / raw) To: u-boot On 07/03/2016 09:37 PM, Rajesh Bhagat wrote: > > > Will take care in v3. > Did you send v3 patch set? York ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-06-06 9:16 [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-06 9:16 ` [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava @ 2016-06-06 9:16 ` Rajat Srivastava 2016-06-10 0:35 ` Simon Glass 2016-06-23 14:57 ` Lukasz Majewski 2016-06-06 9:16 ` [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable " Rajat Srivastava 3 siblings, 2 replies; 22+ messages in thread From: Rajat Srivastava @ 2016-06-06 9:16 UTC (permalink / raw) To: u-boot Implements the dwc3 gadget driver support for LS1043 platform, and performs below operations: 1. Enables snooping support for DWC3 controller. 2. Enables cache coherency in LS1043 platform. Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> --- Changes in v2: - Moves DWC3 driver specific code to helper functions - Calls helper functions in SoC specific implementation arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 ++++++++++++++++++++++ .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++ 2 files changed, 99 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..cc07524 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -17,6 +17,10 @@ #ifdef CONFIG_CHAIN_OF_TRUST #include <fsl_validate.h> #endif +#include <usb.h> +#include <dwc3-uboot.h> +#include <linux/usb/xhci-fsl.h> + DECLARE_GLOBAL_DATA_PTR; @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif + /* Make SEC and USB reads and writes snoopable */ +#if defined(CONFIG_LS1043A) + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | + SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP | + SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP | + SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP | + SCFG_SNPCNFGCR_USB3WRSNP); +#else /* Make SEC reads and writes snoopable */ setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | SCFG_SNPCNFGCR_SECWRSNP); +#endif /* * Enable snoop requests and DVM message requests for @@ -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) } #endif +#ifdef CONFIG_USB_DWC3 + +#if defined(CONFIG_LS1043A) +static struct dwc3_device dwc3_device_data0 = { + .maximum_speed = USB_SPEED_HIGH, + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 0, +}; + +static struct dwc3_device dwc3_device_data1 = { + .maximum_speed = USB_SPEED_HIGH, + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 1, +}; + +static struct dwc3_device dwc3_device_data2 = { + .maximum_speed = USB_SPEED_HIGH, + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 2, +}; + +int usb_gadget_handle_interrupts(int index) +{ + dwc3_uboot_handle_interrupt(index); + return 0; +} +#endif + +int board_usb_init(int index, enum usb_init_type init) +{ + switch (init) { + case USB_INIT_DEVICE: + switch (index) { +#if defined(CONFIG_LS1043A) + case 0: + dwc3_uboot_init(&dwc3_device_data0); + break; + case 1: + dwc3_uboot_init(&dwc3_device_data1); + break; + case 2: + dwc3_uboot_init(&dwc3_device_data2); + break; +#endif + default: + printf("Invalid Controller Index\n"); + return -1; + } +#if defined(CONFIG_LS1043A) + dwc3_core_incr_burst_enable(index, 0xf, 0xf); + dwc3_core_set_snooping(index, true); +#endif + break; + default: + break; + } + + return 0; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + switch (init) { + case USB_INIT_DEVICE: +#if defined(CONFIG_LS1043A) + dwc3_uboot_exit(index); +#endif + break; + default: + break; + } + return 0; +} +#endif + + + #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 57b99d4..13ba1a6 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -328,6 +328,12 @@ struct ccsr_gur { #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 /* Supplemental Configuration Unit */ struct ccsr_scfg { -- 2.6.2.198.g614a2ac ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-06-06 9:16 ` [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava @ 2016-06-10 0:35 ` Simon Glass 2016-06-14 4:11 ` Rajesh Bhagat 2016-06-23 14:57 ` Lukasz Majewski 1 sibling, 1 reply; 22+ messages in thread From: Simon Glass @ 2016-06-10 0:35 UTC (permalink / raw) To: u-boot Hi, On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: > Implements the dwc3 gadget driver support for LS1043 > platform, and performs below operations: > 1. Enables snooping support for DWC3 controller. > 2. Enables cache coherency in LS1043 platform. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> > --- > Changes in v2: > - Moves DWC3 driver specific code to helper functions > - Calls helper functions in SoC specific implementation > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 ++++++++++++++++++++++ > .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++ > 2 files changed, 99 insertions(+) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > index 0fb5c7f..cc07524 100644 > --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > @@ -17,6 +17,10 @@ > #ifdef CONFIG_CHAIN_OF_TRUST > #include <fsl_validate.h> > #endif > +#include <usb.h> > +#include <dwc3-uboot.h> > +#include <linux/usb/xhci-fsl.h> > + > > DECLARE_GLOBAL_DATA_PTR; > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) > #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); > #endif > + /* Make SEC and USB reads and writes snoopable */ > +#if defined(CONFIG_LS1043A) > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > + SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP | > + SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP | > + SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP | > + SCFG_SNPCNFGCR_USB3WRSNP); > +#else > /* Make SEC reads and writes snoopable */ > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > SCFG_SNPCNFGCR_SECWRSNP); > +#endif > > /* > * Enable snoop requests and DVM message requests for > @@ -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) > } > #endif > > +#ifdef CONFIG_USB_DWC3 > + > +#if defined(CONFIG_LS1043A) > +static struct dwc3_device dwc3_device_data0 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 0, > +}; > + > +static struct dwc3_device dwc3_device_data1 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 1, > +}; > + > +static struct dwc3_device dwc3_device_data2 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 2, > +}; > + > +int usb_gadget_handle_interrupts(int index) > +{ > + dwc3_uboot_handle_interrupt(index); > + return 0; > +} > +#endif > + > +int board_usb_init(int index, enum usb_init_type init) > +{ > + switch (init) { > + case USB_INIT_DEVICE: > + switch (index) { > +#if defined(CONFIG_LS1043A) > + case 0: > + dwc3_uboot_init(&dwc3_device_data0); > + break; > + case 1: > + dwc3_uboot_init(&dwc3_device_data1); > + break; > + case 2: > + dwc3_uboot_init(&dwc3_device_data2); > + break; > +#endif Can this use driver model? It seems odd to be adding new code like this. > + default: > + printf("Invalid Controller Index\n"); > + return -1; > + } > +#if defined(CONFIG_LS1043A) > + dwc3_core_incr_burst_enable(index, 0xf, 0xf); > + dwc3_core_set_snooping(index, true); > +#endif > + break; > + default: > + break; > + } > + > + return 0; > +} > + > +int board_usb_cleanup(int index, enum usb_init_type init) > +{ > + switch (init) { > + case USB_INIT_DEVICE: > +#if defined(CONFIG_LS1043A) > + dwc3_uboot_exit(index); > +#endif > + break; > + default: > + break; > + } > + return 0; > +} > +#endif > + > + > + > #ifdef CONFIG_BOARD_LATE_INIT > int board_late_init(void) > { > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > index 57b99d4..13ba1a6 100644 > --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > @@ -328,6 +328,12 @@ struct ccsr_gur { > > #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 > #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 > +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 > +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 > +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 > +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 > +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 > +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 > > /* Supplemental Configuration Unit */ > struct ccsr_scfg { > -- > 2.6.2.198.g614a2ac > Regards, Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-06-10 0:35 ` Simon Glass @ 2016-06-14 4:11 ` Rajesh Bhagat 0 siblings, 0 replies; 22+ messages in thread From: Rajesh Bhagat @ 2016-06-14 4:11 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: sjg at google.com [mailto:sjg at google.com] On Behalf Of Simon Glass > Sent: Friday, June 10, 2016 6:05 AM > To: Rajat Srivastava <rajat.srivastava@nxp.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Lukasz Majewski > <l.majewski@samsung.com>; Marek Va?ut <marex@denx.de>; Albert ARIBAUD > <albert.u.boot@aribaud.net>; Prabhakar Kushwaha <prabhakar@freescale.com>; > york sun <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat > <rajesh.bhagat@nxp.com>; Michal Simek <michal.simek@xilinx.com>; > felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support > > Hi, > > On 6 June 2016 at 03:16, Rajat Srivastava <rajat.srivastava@nxp.com> wrote: > > Implements the dwc3 gadget driver support for LS1043 platform, and > > performs below operations: > > 1. Enables snooping support for DWC3 controller. > > 2. Enables cache coherency in LS1043 platform. > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> > > --- > > Changes in v2: > > - Moves DWC3 driver specific code to helper functions > > - Calls helper functions in SoC specific implementation > > > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 > ++++++++++++++++++++++ > > .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 6 ++ > > 2 files changed, 99 insertions(+) > > > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > index 0fb5c7f..cc07524 100644 > > --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > @@ -17,6 +17,10 @@ > > #ifdef CONFIG_CHAIN_OF_TRUST > > #include <fsl_validate.h> > > #endif > > +#include <usb.h> > > +#include <dwc3-uboot.h> > > +#include <linux/usb/xhci-fsl.h> > > + > > > > DECLARE_GLOBAL_DATA_PTR; > > > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) #if > > defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) > > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif > > + /* Make SEC and USB reads and writes snoopable */ #if > > +defined(CONFIG_LS1043A) > > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > + SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP | > > + SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP > | > > + SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP > | > > + SCFG_SNPCNFGCR_USB3WRSNP); #else > > /* Make SEC reads and writes snoopable */ > > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > SCFG_SNPCNFGCR_SECWRSNP); > > +#endif > > > > /* > > * Enable snoop requests and DVM message requests for @@ > > -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) } #endif > > > > +#ifdef CONFIG_USB_DWC3 > > + > > +#if defined(CONFIG_LS1043A) > > +static struct dwc3_device dwc3_device_data0 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 0, > > +}; > > + > > +static struct dwc3_device dwc3_device_data1 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 1, > > +}; > > + > > +static struct dwc3_device dwc3_device_data2 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 2, > > +}; > > + > > +int usb_gadget_handle_interrupts(int index) { > > + dwc3_uboot_handle_interrupt(index); > > + return 0; > > +} > > +#endif > > + > > +int board_usb_init(int index, enum usb_init_type init) { > > + switch (init) { > > + case USB_INIT_DEVICE: > > + switch (index) { > > +#if defined(CONFIG_LS1043A) > > + case 0: > > + dwc3_uboot_init(&dwc3_device_data0); > > + break; > > + case 1: > > + dwc3_uboot_init(&dwc3_device_data1); > > + break; > > + case 2: > > + dwc3_uboot_init(&dwc3_device_data2); > > + break; > > +#endif > Hello Simon, > Can this use driver model? It seems odd to be adding new code like this. > Will it be OK to pass below values in dwc3_uboot_init function instead, if DM is not used? Best Regards, Rajesh Bhagat > > + default: > > + printf("Invalid Controller Index\n"); > > + return -1; > > + } > > +#if defined(CONFIG_LS1043A) > > + dwc3_core_incr_burst_enable(index, 0xf, 0xf); > > + dwc3_core_set_snooping(index, true); #endif > > + break; > > + default: > > + break; > > + } > > + > > + return 0; > > +} > > + > > +int board_usb_cleanup(int index, enum usb_init_type init) { > > + switch (init) { > > + case USB_INIT_DEVICE: > > +#if defined(CONFIG_LS1043A) > > + dwc3_uboot_exit(index); #endif > > + break; > > + default: > > + break; > > + } > > + return 0; > > +} > > +#endif > > + > > + > > + > > #ifdef CONFIG_BOARD_LATE_INIT > > int board_late_init(void) > > { > > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > index 57b99d4..13ba1a6 100644 > > --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > @@ -328,6 +328,12 @@ struct ccsr_gur { > > > > #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 > > #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 > > +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 > > +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 > > +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 > > +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 > > +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 > > +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 > > > > /* Supplemental Configuration Unit */ struct ccsr_scfg { > > -- > > 2.6.2.198.g614a2ac > > > > Regards, > Simon ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-06-06 9:16 ` [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-10 0:35 ` Simon Glass @ 2016-06-23 14:57 ` Lukasz Majewski 2016-07-04 4:37 ` Rajesh Bhagat 1 sibling, 1 reply; 22+ messages in thread From: Lukasz Majewski @ 2016-06-23 14:57 UTC (permalink / raw) To: u-boot Hi Rajat, > Implements the dwc3 gadget driver support for LS1043 > platform, and performs below operations: > 1. Enables snooping support for DWC3 controller. > 2. Enables cache coherency in LS1043 platform. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> > --- > Changes in v2: > - Moves DWC3 driver specific code to helper functions > - Calls helper functions in SoC specific implementation > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 > ++++++++++++++++++++++ .../include/asm/arch-fsl-layerscape/immap_lsch2.h > | 6 ++ 2 files changed, 99 insertions(+) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..cc07524 > 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > @@ -17,6 +17,10 @@ > #ifdef CONFIG_CHAIN_OF_TRUST > #include <fsl_validate.h> > #endif > +#include <usb.h> > +#include <dwc3-uboot.h> > +#include <linux/usb/xhci-fsl.h> > + > > DECLARE_GLOBAL_DATA_PTR; > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) > #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); > #endif > + /* Make SEC and USB reads and writes snoopable */ > +#if defined(CONFIG_LS1043A) > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > + SCFG_SNPCNFGCR_SECWRSNP | > SCFG_SNPCNFGCR_USB1RDSNP | > + SCFG_SNPCNFGCR_USB1WRSNP | > SCFG_SNPCNFGCR_USB2RDSNP | > + SCFG_SNPCNFGCR_USB2WRSNP | > SCFG_SNPCNFGCR_USB3RDSNP | > + SCFG_SNPCNFGCR_USB3WRSNP); > +#else > /* Make SEC reads and writes snoopable */ > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > SCFG_SNPCNFGCR_SECWRSNP); > +#endif > > /* > * Enable snoop requests and DVM message requests for > @@ -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) > } > #endif > > +#ifdef CONFIG_USB_DWC3 > + > +#if defined(CONFIG_LS1043A) > +static struct dwc3_device dwc3_device_data0 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 0, > +}; > + > +static struct dwc3_device dwc3_device_data1 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 1, > +}; > + > +static struct dwc3_device dwc3_device_data2 = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 2, > +}; > + > +int usb_gadget_handle_interrupts(int index) > +{ > + dwc3_uboot_handle_interrupt(index); > + return 0; > +} > +#endif > + > +int board_usb_init(int index, enum usb_init_type init) Are those usb related functions generic? To ask in another way, would it be possible to reuse those functions for other armv8 boards? Please correct me if I'm wrong, but it seems that LS1043 is a single board. Maybe it would be better to place this code in a separate ./board/nxp/ls1043 directory? > +{ > + switch (init) { > + case USB_INIT_DEVICE: > + switch (index) { > +#if defined(CONFIG_LS1043A) > + case 0: > + dwc3_uboot_init(&dwc3_device_data0); > + break; > + case 1: > + dwc3_uboot_init(&dwc3_device_data1); > + break; > + case 2: > + dwc3_uboot_init(&dwc3_device_data2); > + break; > +#endif > + default: > + printf("Invalid Controller Index\n"); > + return -1; > + } > +#if defined(CONFIG_LS1043A) > + dwc3_core_incr_burst_enable(index, 0xf, 0xf); > + dwc3_core_set_snooping(index, true); > +#endif > + break; > + default: > + break; > + } > + > + return 0; > +} > + > +int board_usb_cleanup(int index, enum usb_init_type init) > +{ > + switch (init) { > + case USB_INIT_DEVICE: > +#if defined(CONFIG_LS1043A) > + dwc3_uboot_exit(index); > +#endif > + break; > + default: > + break; > + } > + return 0; > +} > +#endif > + > + > + > #ifdef CONFIG_BOARD_LATE_INIT > int board_late_init(void) > { > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index > 57b99d4..13ba1a6 100644 --- > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -328,6 > +328,12 @@ struct ccsr_gur { > #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 > #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 > +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 > +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 > +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 > +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 > +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 > +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 > > /* Supplemental Configuration Unit */ > struct ccsr_scfg { -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-06-23 14:57 ` Lukasz Majewski @ 2016-07-04 4:37 ` Rajesh Bhagat 2016-07-04 7:18 ` Lukasz Majewski 0 siblings, 1 reply; 22+ messages in thread From: Rajesh Bhagat @ 2016-07-04 4:37 UTC (permalink / raw) To: u-boot > -----Original Message----- > From: Lukasz Majewski [mailto:l.majewski at samsung.com] > Sent: Thursday, June 23, 2016 8:27 PM > To: Rajat Srivastava <rajat.srivastava@nxp.com> > Cc: u-boot at lists.denx.de; sjg at chromium.org; marex at denx.de; > albert.u.boot at aribaud.net; prabhakar at freescale.com; york sun > <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat > <rajesh.bhagat@nxp.com>; michal.simek at xilinx.com; felipe.balbi at linux.intel.com > Subject: Re: [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support > > Hi Rajat, > > > Implements the dwc3 gadget driver support for LS1043 platform, and > > performs below operations: > > 1. Enables snooping support for DWC3 controller. > > 2. Enables cache coherency in LS1043 platform. > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> > > --- > > Changes in v2: > > - Moves DWC3 driver specific code to helper functions > > - Calls helper functions in SoC specific implementation > > > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 > > ++++++++++++++++++++++ .../include/asm/arch-fsl- > layerscape/immap_lsch2 > > ++++++++++++++++++++++ .h > > | 6 ++ 2 files changed, 99 insertions(+) > > > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..cc07524 > > 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > @@ -17,6 +17,10 @@ > > #ifdef CONFIG_CHAIN_OF_TRUST > > #include <fsl_validate.h> > > #endif > > +#include <usb.h> > > +#include <dwc3-uboot.h> > > +#include <linux/usb/xhci-fsl.h> > > + > > > > DECLARE_GLOBAL_DATA_PTR; > > > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) #if > > defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) > > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif > > + /* Make SEC and USB reads and writes snoopable */ #if > > +defined(CONFIG_LS1043A) > > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > + SCFG_SNPCNFGCR_SECWRSNP | > > SCFG_SNPCNFGCR_USB1RDSNP | > > + SCFG_SNPCNFGCR_USB1WRSNP | > > SCFG_SNPCNFGCR_USB2RDSNP | > > + SCFG_SNPCNFGCR_USB2WRSNP | > > SCFG_SNPCNFGCR_USB3RDSNP | > > + SCFG_SNPCNFGCR_USB3WRSNP); > > +#else > > /* Make SEC reads and writes snoopable */ > > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > SCFG_SNPCNFGCR_SECWRSNP); > > +#endif > > > > /* > > * Enable snoop requests and DVM message requests for @@ -336,6 > > +349,86 @@ void fsl_lsch2_early_init_f(void) } #endif > > > > +#ifdef CONFIG_USB_DWC3 > > + > > +#if defined(CONFIG_LS1043A) > > +static struct dwc3_device dwc3_device_data0 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 0, > > +}; > > + > > +static struct dwc3_device dwc3_device_data1 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 1, > > +}; > > + > > +static struct dwc3_device dwc3_device_data2 = { > > + .maximum_speed = USB_SPEED_HIGH, > > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > + .index = 2, > > +}; > > + > > +int usb_gadget_handle_interrupts(int index) { > > + dwc3_uboot_handle_interrupt(index); > > + return 0; > > +} > > +#endif > > + > > +int board_usb_init(int index, enum usb_init_type init) > Hello Lukasz, > Are those usb related functions generic? To ask in another way, would it be possible to > reuse those functions for other armv8 boards? > We are planning to use the above code for all the armv8 boards, e.g. LS1043A and LS1012A as they use the same chasis. Hence kept the code in armv8 specific file instead of board files. Best Regards, Rajesh Bhagat > Please correct me if I'm wrong, but it seems that LS1043 is a single board. Maybe it > would be better to place this code in a separate ./board/nxp/ls1043 directory? > > > +{ > > + switch (init) { > > + case USB_INIT_DEVICE: > > + switch (index) { > > +#if defined(CONFIG_LS1043A) > > + case 0: > > + dwc3_uboot_init(&dwc3_device_data0); > > + break; > > + case 1: > > + dwc3_uboot_init(&dwc3_device_data1); > > + break; > > + case 2: > > + dwc3_uboot_init(&dwc3_device_data2); > > + break; > > +#endif > > + default: > > + printf("Invalid Controller Index\n"); > > + return -1; > > + } > > +#if defined(CONFIG_LS1043A) > > + dwc3_core_incr_burst_enable(index, 0xf, 0xf); > > + dwc3_core_set_snooping(index, true); #endif > > + break; > > + default: > > + break; > > + } > > + > > + return 0; > > +} > > + > > +int board_usb_cleanup(int index, enum usb_init_type init) { > > + switch (init) { > > + case USB_INIT_DEVICE: > > +#if defined(CONFIG_LS1043A) > > + dwc3_uboot_exit(index); > > +#endif > > + break; > > + default: > > + break; > > + } > > + return 0; > > +} > > +#endif > > + > > + > > + > > #ifdef CONFIG_BOARD_LATE_INIT > > int board_late_init(void) > > { > > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index > > 57b99d4..13ba1a6 100644 --- > > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -328,6 > > +328,12 @@ struct ccsr_gur { > > #define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 > > #define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 > > +#define SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 > > +#define SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 > > +#define SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 > > +#define SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 > > +#define SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 > > +#define SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 > > > > /* Supplemental Configuration Unit */ struct ccsr_scfg { > > > > -- > Best regards, > > Lukasz Majewski > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support 2016-07-04 4:37 ` Rajesh Bhagat @ 2016-07-04 7:18 ` Lukasz Majewski 0 siblings, 0 replies; 22+ messages in thread From: Lukasz Majewski @ 2016-07-04 7:18 UTC (permalink / raw) To: u-boot Hi Rajesh, > > > > -----Original Message----- > > From: Lukasz Majewski [mailto:l.majewski at samsung.com] > > Sent: Thursday, June 23, 2016 8:27 PM > > To: Rajat Srivastava <rajat.srivastava@nxp.com> > > Cc: u-boot at lists.denx.de; sjg at chromium.org; marex at denx.de; > > albert.u.boot at aribaud.net; prabhakar at freescale.com; york sun > > <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat > > <rajesh.bhagat@nxp.com>; michal.simek at xilinx.com; > > felipe.balbi at linux.intel.com Subject: Re: [PATCH v2 3/4] > > armv8/fsl-layerscape: add dwc3 gadget driver support > > > > Hi Rajat, > > > > > Implements the dwc3 gadget driver support for LS1043 platform, and > > > performs below operations: > > > 1. Enables snooping support for DWC3 controller. > > > 2. Enables cache coherency in LS1043 platform. > > > > > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > > > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > > > Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> > > > --- > > > Changes in v2: > > > - Moves DWC3 driver specific code to helper functions > > > - Calls helper functions in SoC specific implementation > > > > > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 93 > > > ++++++++++++++++++++++ .../include/asm/arch-fsl- > > layerscape/immap_lsch2 > > > ++++++++++++++++++++++ .h > > > | 6 ++ 2 files changed, 99 insertions(+) > > > > > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..cc07524 > > > 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c > > > @@ -17,6 +17,10 @@ > > > #ifdef CONFIG_CHAIN_OF_TRUST > > > #include <fsl_validate.h> > > > #endif > > > +#include <usb.h> > > > +#include <dwc3-uboot.h> > > > +#include <linux/usb/xhci-fsl.h> > > > + > > > > > > DECLARE_GLOBAL_DATA_PTR; > > > > > > @@ -318,9 +322,18 @@ void fsl_lsch2_early_init_f(void) #if > > > defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT) > > > out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); #endif > > > + /* Make SEC and USB reads and writes snoopable */ #if > > > +defined(CONFIG_LS1043A) > > > + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > > + SCFG_SNPCNFGCR_SECWRSNP | > > > SCFG_SNPCNFGCR_USB1RDSNP | > > > + SCFG_SNPCNFGCR_USB1WRSNP | > > > SCFG_SNPCNFGCR_USB2RDSNP | > > > + SCFG_SNPCNFGCR_USB2WRSNP | > > > SCFG_SNPCNFGCR_USB3RDSNP | > > > + SCFG_SNPCNFGCR_USB3WRSNP); > > > +#else > > > /* Make SEC reads and writes snoopable */ > > > setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | > > > SCFG_SNPCNFGCR_SECWRSNP); > > > +#endif > > > > > > /* > > > * Enable snoop requests and DVM message requests for @@ > > > -336,6 +349,86 @@ void fsl_lsch2_early_init_f(void) } #endif > > > > > > +#ifdef CONFIG_USB_DWC3 > > > + > > > +#if defined(CONFIG_LS1043A) > > > +static struct dwc3_device dwc3_device_data0 = { > > > + .maximum_speed = USB_SPEED_HIGH, > > > + .base = CONFIG_SYS_FSL_XHCI_USB1_ADDR, > > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > > + .index = 0, > > > +}; > > > + > > > +static struct dwc3_device dwc3_device_data1 = { > > > + .maximum_speed = USB_SPEED_HIGH, > > > + .base = CONFIG_SYS_FSL_XHCI_USB2_ADDR, > > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > > + .index = 1, > > > +}; > > > + > > > +static struct dwc3_device dwc3_device_data2 = { > > > + .maximum_speed = USB_SPEED_HIGH, > > > + .base = CONFIG_SYS_FSL_XHCI_USB3_ADDR, > > > + .dr_mode = USB_DR_MODE_PERIPHERAL, > > > + .index = 2, > > > +}; > > > + > > > +int usb_gadget_handle_interrupts(int index) { > > > + dwc3_uboot_handle_interrupt(index); > > > + return 0; > > > +} > > > +#endif > > > + > > > +int board_usb_init(int index, enum usb_init_type init) > > > > Hello Lukasz, > > > Are those usb related functions generic? To ask in another way, > > would it be possible to reuse those functions for other armv8 > > boards? > > > > We are planning to use the above code for all the armv8 boards, e.g. > LS1043A and LS1012A as they use the same chasis. Hence kept the code > in armv8 specific file instead of board files. Ok, thanks for clarification. > > Best Regards, > Rajesh Bhagat > > > Please correct me if I'm wrong, but it seems that LS1043 is a > > single board. Maybe it would be better to place this code in a > > separate ./board/nxp/ls1043 directory? > > > > > +{ > > > + switch (init) { > > > + case USB_INIT_DEVICE: > > > + switch (index) { > > > +#if defined(CONFIG_LS1043A) > > > + case 0: > > > + dwc3_uboot_init(&dwc3_device_data0); > > > + break; > > > + case 1: > > > + dwc3_uboot_init(&dwc3_device_data1); > > > + break; > > > + case 2: > > > + dwc3_uboot_init(&dwc3_device_data2); > > > + break; > > > +#endif > > > + default: > > > + printf("Invalid Controller Index\n"); > > > + return -1; > > > + } > > > +#if defined(CONFIG_LS1043A) > > > + dwc3_core_incr_burst_enable(index, 0xf, 0xf); > > > + dwc3_core_set_snooping(index, true); #endif > > > + break; > > > + default: > > > + break; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +int board_usb_cleanup(int index, enum usb_init_type init) { > > > + switch (init) { > > > + case USB_INIT_DEVICE: > > > +#if defined(CONFIG_LS1043A) > > > + dwc3_uboot_exit(index); > > > +#endif > > > + break; > > > + default: > > > + break; > > > + } > > > + return 0; > > > +} > > > +#endif > > > + > > > + > > > + > > > #ifdef CONFIG_BOARD_LATE_INIT > > > int board_late_init(void) > > > { > > > diff --git > > > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h > > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index > > > 57b99d4..13ba1a6 100644 --- > > > a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ > > > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ > > > -328,6 +328,12 @@ struct ccsr_gur { #define > > > SCFG_SNPCNFGCR_SECRDSNP 0x80000000 #define > > > SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define > > > SCFG_SNPCNFGCR_USB1RDSNP 0x00200000 +#define > > > SCFG_SNPCNFGCR_USB1WRSNP 0x00100000 +#define > > > SCFG_SNPCNFGCR_USB2RDSNP 0x00008000 +#define > > > SCFG_SNPCNFGCR_USB2WRSNP 0x00010000 +#define > > > SCFG_SNPCNFGCR_USB3RDSNP 0x00002000 +#define > > > SCFG_SNPCNFGCR_USB3WRSNP 0x00004000 > > > > > > /* Supplemental Configuration Unit */ struct ccsr_scfg { > > > > > > > > -- > > Best regards, > > > > Lukasz Majewski > > > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group > -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable dwc3 gadget driver support 2016-06-06 9:16 [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava ` (2 preceding siblings ...) 2016-06-06 9:16 ` [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava @ 2016-06-06 9:16 ` Rajat Srivastava 2016-06-23 14:57 ` Lukasz Majewski 3 siblings, 1 reply; 22+ messages in thread From: Rajat Srivastava @ 2016-06-06 9:16 UTC (permalink / raw) To: u-boot Enables dwc3 gadget driver support on LS1043QDS platform. Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> --- Changes in v2: - None include/configs/ls1043aqds.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index af1f73d..8c99641 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -394,6 +394,21 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE + +#define CONFIG_USB_DWC3 +#define CONFIG_USB_DWC3_GADGET + +#define CONFIG_USB_GADGET +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor" +#define CONFIG_G_DNL_VENDOR_NUM 0x0471 +#define CONFIG_G_DNL_PRODUCT_NUM 0x1234 +#define CONFIG_USB_GADGET_DUALSPEED + +/* USB Gadget ums command */ +#define CONFIG_CMD_USB_MASS_STORAGE #endif /* -- 2.6.2.198.g614a2ac ^ permalink raw reply related [flat|nested] 22+ messages in thread
* [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable dwc3 gadget driver support 2016-06-06 9:16 ` [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable " Rajat Srivastava @ 2016-06-23 14:57 ` Lukasz Majewski 0 siblings, 0 replies; 22+ messages in thread From: Lukasz Majewski @ 2016-06-23 14:57 UTC (permalink / raw) To: u-boot Hi Rajat, > Enables dwc3 gadget driver support on LS1043QDS platform. > > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> > --- > Changes in v2: > - None > > include/configs/ls1043aqds.h | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/include/configs/ls1043aqds.h > b/include/configs/ls1043aqds.h index af1f73d..8c99641 100644 > --- a/include/configs/ls1043aqds.h > +++ b/include/configs/ls1043aqds.h > @@ -394,6 +394,21 @@ unsigned long get_board_ddr_clk(void); > #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 > #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 > #define CONFIG_USB_STORAGE > + > +#define CONFIG_USB_DWC3 > +#define CONFIG_USB_DWC3_GADGET > + > +#define CONFIG_USB_GADGET > +#define CONFIG_USB_FUNCTION_MASS_STORAGE > +#define CONFIG_USB_GADGET_DOWNLOAD > +#define CONFIG_USB_GADGET_VBUS_DRAW 2 > +#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor" > +#define CONFIG_G_DNL_VENDOR_NUM 0x0471 > +#define CONFIG_G_DNL_PRODUCT_NUM 0x1234 > +#define CONFIG_USB_GADGET_DUALSPEED > + > +/* USB Gadget ums command */ > +#define CONFIG_CMD_USB_MASS_STORAGE > #endif > > /* Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2016-07-27 17:00 UTC | newest] Thread overview: 22+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-06-06 9:16 [U-Boot] [PATCH v2 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-06 9:16 ` [U-Boot] [PATCH v2 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava 2016-06-23 14:44 ` Lukasz Majewski 2016-06-06 9:16 ` [U-Boot] [PATCH v2 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava 2016-06-06 12:54 ` Marek Vasut 2016-06-08 9:44 ` Rajesh Bhagat 2016-06-08 13:26 ` Marek Vasut 2016-06-10 0:34 ` Simon Glass 2016-06-14 4:09 ` Rajesh Bhagat 2016-06-17 3:51 ` Simon Glass 2016-07-04 4:33 ` Rajesh Bhagat 2016-06-23 14:53 ` Lukasz Majewski 2016-07-04 4:37 ` Rajesh Bhagat 2016-07-27 17:00 ` york sun 2016-06-06 9:16 ` [U-Boot] [PATCH v2 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava 2016-06-10 0:35 ` Simon Glass 2016-06-14 4:11 ` Rajesh Bhagat 2016-06-23 14:57 ` Lukasz Majewski 2016-07-04 4:37 ` Rajesh Bhagat 2016-07-04 7:18 ` Lukasz Majewski 2016-06-06 9:16 ` [U-Boot] [PATCH v2 4/4] armv8/fsl-layerscape: enable " Rajat Srivastava 2016-06-23 14:57 ` Lukasz Majewski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox