* [U-Boot] [PATCH v2 1/3] drivers: usb: fsl: add USB ULPI init code
2016-06-09 6:57 [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Rajesh Bhagat
@ 2016-06-09 6:57 ` Rajesh Bhagat
2016-06-09 6:57 ` [U-Boot] [PATCH v2 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds Rajesh Bhagat
` (2 subsequent siblings)
3 siblings, 0 replies; 8+ messages in thread
From: Rajesh Bhagat @ 2016-06-09 6:57 UTC (permalink / raw)
To: u-boot
This adds the required code to set up a ULPI USB port, for
new NXP USB PHY used in QorIQ platforms.
To use this both CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT
have to be set in the board configuration file.
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
Changes in v2:
- Changes return value from -1 to ulpi_init ret value
drivers/usb/host/ehci-fsl.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a43d37d..d166fad 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -16,6 +16,9 @@
#include <hwconfig.h>
#include <fsl_usb.h>
#include <fdt_support.h>
+#ifdef CONFIG_USB_ULPI
+#include <usb/ulpi.h>
+#endif
#include "ehci.h"
@@ -50,6 +53,10 @@ int ehci_hcd_init(int index, enum usb_init_type init,
const char *phy_type = NULL;
size_t len;
char current_usb_controller[5];
+#ifdef CONFIG_USB_ULPI
+ int ret;
+ struct ulpi_viewport ulpi_vp;
+#endif
#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
char usb_phy[5];
@@ -126,6 +133,20 @@ int ehci_hcd_init(int index, enum usb_init_type init,
udelay(1000); /* delay required for PHY Clk to appear */
if (!usb_phy_clk_valid(ehci))
return -EINVAL;
+
+#ifdef CONFIG_USB_ULPI
+ ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
+ ulpi_vp.port_num = 0;
+
+ ret = ulpi_init(&ulpi_vp);
+ if (ret) {
+ puts("NXP ULPI viewport init failed\n");
+ return ret;
+ }
+
+ ulpi_set_vbus(&ulpi_vp, 1, 1);
+ ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 1);
+#endif
out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
}
--
1.7.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH v2 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds
2016-06-09 6:57 [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Rajesh Bhagat
2016-06-09 6:57 ` [U-Boot] [PATCH v2 1/3] drivers: usb: fsl: add USB ULPI init code Rajesh Bhagat
@ 2016-06-09 6:57 ` Rajesh Bhagat
2016-06-09 6:57 ` [U-Boot] [PATCH v2 3/3] armv8: ls1012a: Added CSU assignment for USB2 Rajesh Bhagat
2016-06-09 13:42 ` [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Marek Vasut
3 siblings, 0 replies; 8+ messages in thread
From: Rajesh Bhagat @ 2016-06-09 6:57 UTC (permalink / raw)
To: u-boot
Add USB EHCI support for ls1012aqds platform
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
Changes in v2:
- None
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
include/configs/ls1012aqds.h | 5 +++++
include/usb/ehci-ci.h | 2 +-
3 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 0c87c2f..b1637da 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -34,6 +34,7 @@
#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000)
#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000)
#define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x07600000)
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000)
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index fcf402c..849a0f7 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -117,6 +117,8 @@
#ifdef CONFIG_HAS_FSL_DR_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#endif
@@ -127,6 +129,9 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
#define CONFIG_USB_STORAGE
#endif
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index 882aed4..38d557c 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -159,7 +159,7 @@
#elif defined(CONFIG_MPC512X)
#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR
#define CONFIG_SYS_FSL_USB2_ADDR 0
-#elif defined(CONFIG_LS102XA)
+#elif defined(CONFIG_LS102XA) || defined(CONFIG_LS1012A)
#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR
#define CONFIG_SYS_FSL_USB2_ADDR 0
#endif
--
1.7.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 3/3] armv8: ls1012a: Added CSU assignment for USB2
2016-06-09 6:57 [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Rajesh Bhagat
2016-06-09 6:57 ` [U-Boot] [PATCH v2 1/3] drivers: usb: fsl: add USB ULPI init code Rajesh Bhagat
2016-06-09 6:57 ` [U-Boot] [PATCH v2 2/3] config: ls1012aqds: Add USB EHCI support for ls1012aqds Rajesh Bhagat
@ 2016-06-09 6:57 ` Rajesh Bhagat
2016-06-09 13:42 ` [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Marek Vasut
3 siblings, 0 replies; 8+ messages in thread
From: Rajesh Bhagat @ 2016-06-09 6:57 UTC (permalink / raw)
To: u-boot
Access settings for USB2 IP is added through CSU register.
Added CSU ID for USB2, reg: CSL23_REG[8:0]
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
Changes in v2:
- None
.../include/asm/arch-fsl-layerscape/ns_access.h | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
index db76066..b7da381 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
@@ -38,6 +38,7 @@ enum csu_cslx_ind {
CSU_CSLX_ESDHC,
CSU_CSLX_IFC = 45,
CSU_CSLX_I2C1,
+ CSU_CSLX_USB_2,
CSU_CSLX_I2C3 = 48,
CSU_CSLX_I2C2,
CSU_CSLX_DUART2 = 50,
@@ -117,6 +118,7 @@ static struct csu_ns_dev ns_dev[] = {
{CSU_CSLX_ESDHC, CSU_ALL_RW},
{CSU_CSLX_IFC, CSU_ALL_RW},
{CSU_CSLX_I2C1, CSU_ALL_RW},
+ {CSU_CSLX_USB_2, CSU_ALL_RW},
{CSU_CSLX_I2C3, CSU_ALL_RW},
{CSU_CSLX_I2C2, CSU_ALL_RW},
{CSU_CSLX_DUART2, CSU_ALL_RW},
--
1.7.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
2016-06-09 6:57 [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Rajesh Bhagat
` (2 preceding siblings ...)
2016-06-09 6:57 ` [U-Boot] [PATCH v2 3/3] armv8: ls1012a: Added CSU assignment for USB2 Rajesh Bhagat
@ 2016-06-09 13:42 ` Marek Vasut
2016-06-10 3:41 ` Rajesh Bhagat
3 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2016-06-09 13:42 UTC (permalink / raw)
To: u-boot
On 06/09/2016 08:57 AM, Rajesh Bhagat wrote:
> Adds USB EHCI support for ls1012qds by adding the support
> for NXP ULPI PHY and adding the support it configuration
> files. Also enables, USB2 IP in ns access defines.
>
> Rajesh Bhagat (3):
> drivers: usb: fsl: add USB ULPI init code
> config: ls1012aqds: Add USB EHCI support for ls1012aqds
> armv8: ls1012a: Added CSU assignment for USB2
>
> .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
> .../include/asm/arch-fsl-layerscape/ns_access.h | 2 +
> drivers/usb/host/ehci-fsl.c | 21 ++++++++++++++++++++
> include/configs/ls1012aqds.h | 5 ++++
> include/usb/ehci-ci.h | 2 +-
> 5 files changed, 30 insertions(+), 1 deletions(-)
>
I wanted to apply these on u-boot-usb/master , but patch 2 fails to
apply. Please rebase and repose.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread* [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
2016-06-09 13:42 ` [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Marek Vasut
@ 2016-06-10 3:41 ` Rajesh Bhagat
2016-06-10 4:10 ` Marek Vasut
0 siblings, 1 reply; 8+ messages in thread
From: Rajesh Bhagat @ 2016-06-10 3:41 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: Marek Vasut [mailto:marex at denx.de]
> Sent: Thursday, June 09, 2016 7:12 PM
> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; u-boot at lists.denx.de
> Cc: Sriram Dash <sriram.dash@nxp.com>; albert.u.boot at aribaud.net;
> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Rajat Srivastava
> <rajat.srivastava@nxp.com>
> Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
>
> On 06/09/2016 08:57 AM, Rajesh Bhagat wrote:
> > Adds USB EHCI support for ls1012qds by adding the support for NXP ULPI
> > PHY and adding the support it configuration files. Also enables, USB2
> > IP in ns access defines.
> >
> > Rajesh Bhagat (3):
> > drivers: usb: fsl: add USB ULPI init code
> > config: ls1012aqds: Add USB EHCI support for ls1012aqds
> > armv8: ls1012a: Added CSU assignment for USB2
> >
> > .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
> > .../include/asm/arch-fsl-layerscape/ns_access.h | 2 +
> > drivers/usb/host/ehci-fsl.c | 21 ++++++++++++++++++++
> > include/configs/ls1012aqds.h | 5 ++++
> > include/usb/ehci-ci.h | 2 +-
> > 5 files changed, 30 insertions(+), 1 deletions(-)
> >
Hello Marek,
> I wanted to apply these on u-boot-usb/master , but patch 2 fails to apply. Please
> rebase and repose.
>
Can you apply below patch for Layerscape USB macro cleanup for various Soc to
apply above patch:
https://patchwork.ozlabs.org/patch/631595/
[root at phoenix u-boot-usb]$ pw-am.sh 631595
2016-06-10 09:02:02 URL:https://patchwork.ozlabs.org/patch/631595/mbox/ [6138] -> "pw-am-631595.patch" [1]
Applying: include: usb: Rename USB controller base address mapping
[root at phoenix u-boot-usb]$ pw-am.sh 632644
2016-06-10 09:02:18 URL:https://patchwork.ozlabs.org/patch/632644/mbox/ [2104] -> "pw-am-632644.patch" [1]
Applying: drivers: usb: fsl: add USB ULPI init code
[root at phoenix u-boot-usb]$ pw-am.sh 632646
2016-06-10 09:02:28 URL:https://patchwork.ozlabs.org/patch/632646/mbox/ [2819] -> "pw-am-632646.patch" [1]
Applying: config: ls1012aqds: Add USB EHCI support for ls1012aqds
[root at phoenix u-boot-usb]$ pw-am.sh 632645
2016-06-10 09:02:36 URL:https://patchwork.ozlabs.org/patch/632645/mbox/ [1501] -> "pw-am-632645.patch" [1]
Applying: armv8: ls1012a: Added CSU assignment for USB2
OR
Please share if there is a need to rebase them.
Best Regards,
Rajesh Bhagat
> --
> Best regards,
> Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
2016-06-10 3:41 ` Rajesh Bhagat
@ 2016-06-10 4:10 ` Marek Vasut
2016-08-02 12:22 ` Rajesh Bhagat
0 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2016-06-10 4:10 UTC (permalink / raw)
To: u-boot
On 06/10/2016 05:41 AM, Rajesh Bhagat wrote:
>
>
>> -----Original Message-----
>> From: Marek Vasut [mailto:marex at denx.de]
>> Sent: Thursday, June 09, 2016 7:12 PM
>> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; u-boot at lists.denx.de
>> Cc: Sriram Dash <sriram.dash@nxp.com>; albert.u.boot at aribaud.net;
>> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Rajat Srivastava
>> <rajat.srivastava@nxp.com>
>> Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
>>
>> On 06/09/2016 08:57 AM, Rajesh Bhagat wrote:
>>> Adds USB EHCI support for ls1012qds by adding the support for NXP ULPI
>>> PHY and adding the support it configuration files. Also enables, USB2
>>> IP in ns access defines.
>>>
>>> Rajesh Bhagat (3):
>>> drivers: usb: fsl: add USB ULPI init code
>>> config: ls1012aqds: Add USB EHCI support for ls1012aqds
>>> armv8: ls1012a: Added CSU assignment for USB2
>>>
>>> .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
>>> .../include/asm/arch-fsl-layerscape/ns_access.h | 2 +
>>> drivers/usb/host/ehci-fsl.c | 21 ++++++++++++++++++++
>>> include/configs/ls1012aqds.h | 5 ++++
>>> include/usb/ehci-ci.h | 2 +-
>>> 5 files changed, 30 insertions(+), 1 deletions(-)
>>>
>
> Hello Marek,
>
>> I wanted to apply these on u-boot-usb/master , but patch 2 fails to apply. Please
>> rebase and repose.
>>
>
> Can you apply below patch for Layerscape USB macro cleanup for various Soc to
> apply above patch:
>
> https://patchwork.ozlabs.org/patch/631595/
This has to go through soc tree, so I will have to wait for it to be
applied. Let me know when it's in, then I can pick these patches.
> [root at phoenix u-boot-usb]$ pw-am.sh 631595
> 2016-06-10 09:02:02 URL:https://patchwork.ozlabs.org/patch/631595/mbox/ [6138] -> "pw-am-631595.patch" [1]
> Applying: include: usb: Rename USB controller base address mapping
> [root at phoenix u-boot-usb]$ pw-am.sh 632644
> 2016-06-10 09:02:18 URL:https://patchwork.ozlabs.org/patch/632644/mbox/ [2104] -> "pw-am-632644.patch" [1]
> Applying: drivers: usb: fsl: add USB ULPI init code
> [root at phoenix u-boot-usb]$ pw-am.sh 632646
> 2016-06-10 09:02:28 URL:https://patchwork.ozlabs.org/patch/632646/mbox/ [2819] -> "pw-am-632646.patch" [1]
> Applying: config: ls1012aqds: Add USB EHCI support for ls1012aqds
> [root at phoenix u-boot-usb]$ pw-am.sh 632645
> 2016-06-10 09:02:36 URL:https://patchwork.ozlabs.org/patch/632645/mbox/ [1501] -> "pw-am-632645.patch" [1]
> Applying: armv8: ls1012a: Added CSU assignment for USB2
>
> OR
>
> Please share if there is a need to rebase them.
>
> Best Regards,
> Rajesh Bhagat
>
>> --
>> Best regards,
>> Marek Vasut
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
2016-06-10 4:10 ` Marek Vasut
@ 2016-08-02 12:22 ` Rajesh Bhagat
0 siblings, 0 replies; 8+ messages in thread
From: Rajesh Bhagat @ 2016-08-02 12:22 UTC (permalink / raw)
To: u-boot
>
> > -----Original Message-----
> > From: Marek Vasut [mailto:marex at denx.de]
> > Sent: Friday, June 10, 2016 9:40 AM
> > To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; u-boot at lists.denx.de
> > Cc: Sriram Dash <sriram.dash@nxp.com>; albert.u.boot at aribaud.net;
> > prabhakar at freescale.com; york sun <york.sun@nxp.com>; Rajat Srivastava
> > <rajat.srivastava@nxp.com>
> > Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
> >
> > On 06/10/2016 05:41 AM, Rajesh Bhagat wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: Marek Vasut [mailto:marex at denx.de]
> > >> Sent: Thursday, June 09, 2016 7:12 PM
> > >> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; u-boot at lists.denx.de
> > >> Cc: Sriram Dash <sriram.dash@nxp.com>; albert.u.boot at aribaud.net;
> > >> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Rajat
> > >> Srivastava <rajat.srivastava@nxp.com>
> > >> Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds
> > >>
> > >> On 06/09/2016 08:57 AM, Rajesh Bhagat wrote:
> > >>> Adds USB EHCI support for ls1012qds by adding the support for NXP
> > >>> ULPI PHY and adding the support it configuration files. Also
> > >>> enables, USB2 IP in ns access defines.
> > >>>
> > >>> Rajesh Bhagat (3):
> > >>> drivers: usb: fsl: add USB ULPI init code
> > >>> config: ls1012aqds: Add USB EHCI support for ls1012aqds
> > >>> armv8: ls1012a: Added CSU assignment for USB2
> > >>>
> > >>> .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
> > >>> .../include/asm/arch-fsl-layerscape/ns_access.h | 2 +
> > >>> drivers/usb/host/ehci-fsl.c | 21
> > ++++++++++++++++++++
> > >>> include/configs/ls1012aqds.h | 5 ++++
> > >>> include/usb/ehci-ci.h | 2 +-
> > >>> 5 files changed, 30 insertions(+), 1 deletions(-)
> > >>>
> > >
> > > Hello Marek,
> > >
> > >> I wanted to apply these on u-boot-usb/master , but patch 2 fails to
> > >> apply. Please rebase and repose.
> > >>
> > >
> > > Can you apply below patch for Layerscape USB macro cleanup for
> > > various Soc to apply above patch:
> > >
> > > https://patchwork.ozlabs.org/patch/631595/
Hello Marek,
> >
> > This has to go through soc tree, so I will have to wait for it to be
> > applied. Let me know when it's in, then I can pick these patches.
> >
The dependency patch has made it to uboot master, Please apply the
EHCI support patches.
Commit: 9729dc9565c9c1812efbb630e1db4d54f580363c
include: usb: Rename USB controller base address mapping
Best Regards,
Rajesh Bhagat
> > > [root at phoenix u-boot-usb]$ pw-am.sh 631595
> > > 2016-06-10 09:02:02
> > > URL:https://patchwork.ozlabs.org/patch/631595/mbox/ [6138] ->
> > > "pw-am-631595.patch" [1]
> > > Applying: include: usb: Rename USB controller base address mapping
> > > [root at phoenix u-boot-usb]$ pw-am.sh 632644
> > > 2016-06-10 09:02:18
> > > URL:https://patchwork.ozlabs.org/patch/632644/mbox/ [2104] ->
> > > "pw-am-632644.patch" [1]
> > > Applying: drivers: usb: fsl: add USB ULPI init code [root at phoenix
> > > u-boot-usb]$ pw-am.sh 632646
> > > 2016-06-10 09:02:28
> > > URL:https://patchwork.ozlabs.org/patch/632646/mbox/ [2819] ->
> > > "pw-am-632646.patch" [1]
> > > Applying: config: ls1012aqds: Add USB EHCI support for ls1012aqds
> > > [root at phoenix u-boot-usb]$ pw-am.sh 632645
> > > 2016-06-10 09:02:36
> > > URL:https://patchwork.ozlabs.org/patch/632645/mbox/ [1501] ->
> > > "pw-am-632645.patch" [1]
> > > Applying: armv8: ls1012a: Added CSU assignment for USB2
> > >
> > > OR
> > >
> > > Please share if there is a need to rebase them.
> > >
> > > Best Regards,
> > > Rajesh Bhagat
> > >
> > >> --
> > >> Best regards,
> > >> Marek Vasut
> >
> >
> > --
> > Best regards,
> > Marek Vasut
^ permalink raw reply [flat|nested] 8+ messages in thread