From: Keerthy <a0393675@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: dra7xx: Assign omap_vcores based on board type
Date: Mon, 13 Jun 2016 09:24:28 +0530 [thread overview]
Message-ID: <575E2E74.3030804@ti.com> (raw)
In-Reply-To: <1465295725-7620-1-git-send-email-j-keerthy@ti.com>
Hi Tom,
On Tuesday 07 June 2016 04:05 PM, Keerthy wrote:
> Currently omap_vcores which holds pmic data is being assigned based
> on the SoC type. PMIC is not a part of SoC. It is logical to
> to assign omap_vcores based on board type. Hence over ride the
> vcores_init function and assign omap_vcores based on the board type.
>
If there are no comments on this one. Can you please pull this patch?
> Reported-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>
> Boot tested on both dra7-evm and dra72-evm.
>
> arch/arm/cpu/armv7/omap5/hw_data.c | 78 --------------------------------
> board/ti/dra7xx/evm.c | 91 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 91 insertions(+), 78 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
> index a517b13..65f43d6 100644
> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
> @@ -364,82 +364,6 @@ struct vcores_data omap5430_volts_es2 = {
> .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
> };
>
> -struct vcores_data dra752_volts = {
> - .mpu.value = VDD_MPU_DRA7,
> - .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
> - .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .mpu.addr = TPS659038_REG_ADDR_SMPS12,
> - .mpu.pmic = &tps659038,
> - .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
> -
> - .eve.value = VDD_EVE_DRA7,
> - .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
> - .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .eve.addr = TPS659038_REG_ADDR_SMPS45,
> - .eve.pmic = &tps659038,
> - .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
> -
> - .gpu.value = VDD_GPU_DRA7,
> - .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
> - .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .gpu.addr = TPS659038_REG_ADDR_SMPS6,
> - .gpu.pmic = &tps659038,
> - .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
> -
> - .core.value = VDD_CORE_DRA7,
> - .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
> - .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .core.addr = TPS659038_REG_ADDR_SMPS7,
> - .core.pmic = &tps659038,
> -
> - .iva.value = VDD_IVA_DRA7,
> - .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
> - .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .iva.addr = TPS659038_REG_ADDR_SMPS8,
> - .iva.pmic = &tps659038,
> - .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
> -};
> -
> -struct vcores_data dra722_volts = {
> - .mpu.value = VDD_MPU_DRA7,
> - .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
> - .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .mpu.addr = TPS65917_REG_ADDR_SMPS1,
> - .mpu.pmic = &tps659038,
> - .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
> -
> - .core.value = VDD_CORE_DRA7,
> - .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
> - .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .core.addr = TPS65917_REG_ADDR_SMPS2,
> - .core.pmic = &tps659038,
> -
> - /*
> - * The DSPEVE, GPU and IVA rails are usually grouped on DRA72x
> - * designs and powered by TPS65917 SMPS3, as on the J6Eco EVM.
> - */
> - .gpu.value = VDD_GPU_DRA7,
> - .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
> - .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .gpu.addr = TPS65917_REG_ADDR_SMPS3,
> - .gpu.pmic = &tps659038,
> - .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
> -
> - .eve.value = VDD_EVE_DRA7,
> - .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
> - .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .eve.addr = TPS65917_REG_ADDR_SMPS3,
> - .eve.pmic = &tps659038,
> - .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
> -
> - .iva.value = VDD_IVA_DRA7,
> - .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
> - .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> - .iva.addr = TPS65917_REG_ADDR_SMPS3,
> - .iva.pmic = &tps659038,
> - .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
> -};
> -
> /*
> * Enable essential clock domains, modules and
> * do some additional special settings needed
> @@ -804,7 +728,6 @@ void __weak hw_data_init(void)
> case DRA752_ES2_0:
> *prcm = &dra7xx_prcm;
> *dplls_data = &dra7xx_dplls;
> - *omap_vcores = &dra752_volts;
> *ctrl = &dra7xx_ctrl;
> break;
>
> @@ -812,7 +735,6 @@ void __weak hw_data_init(void)
> case DRA722_ES2_0:
> *prcm = &dra7xx_prcm;
> *dplls_data = &dra72x_dplls;
> - *omap_vcores = &dra722_volts;
> *ctrl = &dra7xx_ctrl;
> break;
>
> diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
> index 8c916a3..c5f7190 100644
> --- a/board/ti/dra7xx/evm.c
> +++ b/board/ti/dra7xx/evm.c
> @@ -310,6 +310,82 @@ void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
> }
> }
>
> +struct vcores_data dra752_volts = {
> + .mpu.value = VDD_MPU_DRA7,
> + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
> + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .mpu.addr = TPS659038_REG_ADDR_SMPS12,
> + .mpu.pmic = &tps659038,
> + .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
> +
> + .eve.value = VDD_EVE_DRA7,
> + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
> + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .eve.addr = TPS659038_REG_ADDR_SMPS45,
> + .eve.pmic = &tps659038,
> + .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
> +
> + .gpu.value = VDD_GPU_DRA7,
> + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
> + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .gpu.addr = TPS659038_REG_ADDR_SMPS6,
> + .gpu.pmic = &tps659038,
> + .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
> +
> + .core.value = VDD_CORE_DRA7,
> + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
> + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .core.addr = TPS659038_REG_ADDR_SMPS7,
> + .core.pmic = &tps659038,
> +
> + .iva.value = VDD_IVA_DRA7,
> + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
> + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .iva.addr = TPS659038_REG_ADDR_SMPS8,
> + .iva.pmic = &tps659038,
> + .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
> +};
> +
> +struct vcores_data dra722_volts = {
> + .mpu.value = VDD_MPU_DRA7,
> + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
> + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .mpu.addr = TPS65917_REG_ADDR_SMPS1,
> + .mpu.pmic = &tps659038,
> + .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
> +
> + .core.value = VDD_CORE_DRA7,
> + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
> + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .core.addr = TPS65917_REG_ADDR_SMPS2,
> + .core.pmic = &tps659038,
> +
> + /*
> + * The DSPEVE, GPU and IVA rails are usually grouped on DRA72x
> + * designs and powered by TPS65917 SMPS3, as on the J6Eco EVM.
> + */
> + .gpu.value = VDD_GPU_DRA7,
> + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
> + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .gpu.addr = TPS65917_REG_ADDR_SMPS3,
> + .gpu.pmic = &tps659038,
> + .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
> +
> + .eve.value = VDD_EVE_DRA7,
> + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
> + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .eve.addr = TPS65917_REG_ADDR_SMPS3,
> + .eve.pmic = &tps659038,
> + .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
> +
> + .iva.value = VDD_IVA_DRA7,
> + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
> + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
> + .iva.addr = TPS65917_REG_ADDR_SMPS3,
> + .iva.pmic = &tps659038,
> + .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
> +};
> +
> /**
> * @brief board_init
> *
> @@ -405,6 +481,21 @@ void do_board_detect(void)
> }
> #endif /* CONFIG_SPL_BUILD */
>
> +void vcores_init(void)
> +{
> + if (board_is_dra74x_evm()) {
> + *omap_vcores = &dra752_volts;
> + } else if (board_is_dra72x_evm()) {
> + *omap_vcores = &dra722_volts;
> + } else {
> + /* If EEPROM is not populated */
> + if (is_dra72x())
> + *omap_vcores = &dra722_volts;
> + else
> + *omap_vcores = &dra752_volts;
> + }
> +}
> +
> void set_muxconf_regs(void)
> {
> do_set_mux32((*ctrl)->control_padconf_core_base,
>
next prev parent reply other threads:[~2016-06-13 3:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-07 10:35 [U-Boot] [PATCH] arm: dra7xx: Assign omap_vcores based on board type Keerthy
2016-06-13 3:54 ` Keerthy [this message]
2016-06-19 14:07 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575E2E74.3030804@ti.com \
--to=a0393675@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox