[U-Boot] RFC, dm: devices and device_info platdata manual relocation

[Angelo Dureghello <angelo@sysam.it>]

Hi Simon,

On 17/06/2016 05:49, Simon Glass wrote:
> Hi Angelo,
>
> On 14 May 2016 at 04:59, Angelo Dureghello <angelo@sysam.it> wrote:
>> Hi all,
>>
>> i have seen, updating u-boot in NOR parallel flash,
>> that the U_BOOT_DEVICE structure "platdata" ptr is
>> still pointing to flash, so the update (rewriting
>> flash) die silently and fails.
>>
>> I have found a workaround using misc_init_r that works
>> in my board.c, as below, but i don't like too much the solution:
>>
>> ...
>> #include <dm/platform_data/serial_coldfire.h>
>> ...
>>
>> DECLARE_GLOBAL_DATA_PTR;
>> ....
>>
>> int misc_init_r(void)
>> {
>>          /*
>>           * FIXME: relocation seems not working properly on m68k,
>>           * so relocating manually
>>           */
>>          struct udevice *dev;
>>          int retval;
>>
>>          printf("misc_init_r(): entering\n");
>>
>>          retval = uclass_find_device(UCLASS_SERIAL, 0, &dev);
>>
>>          if (!retval) {
>>                  printf("misc_init_r(): relocating serial device\n");
>>
>>                  dev->platdata += gd->reloc_off;
>>          }
>>
>>          return 0;
>> }
>>
>> static struct coldfire_serial_platdata mcf5307_serial_plat = {
>>          .base = CONFIG_SYS_UART_BASE,
>>          .port = 0,
>>          .baudrate = CONFIG_BAUDRATE,
>> };
>>
>> U_BOOT_DEVICE(coldfire_serial) = {
>>          .name = "serial_coldfire",
>>          .platdata = &mcf5307_serial_plat,
>> };
>>
>>
>> So, i can keep this changes in my board, but, i am wondering if manual-reloc
>> of devices structures is maybe responsibility of
>> drivers/core/root.c, something like
>>
>> int dm_init(void)
>>
>> {
>>
>> .....
>> #if defined(CONFIG_NEEDS_MANUAL_RELOC)
>>          fix_drivers();
>>          fix_uclass();
>>          fix_devices(); <-------------
>> #endif
>>
>> .....
>>
>> Every comment is welcome.
>
> I believe you have sent a patch for this and is has been applied, correct?
>

Yes, it's already applied.

I thought to provide directly the patch, to facilitate
things and since u-boot on amcore board was not relocating
correctly.


Many Thanks !

Regards
angelo

> Regards,
> Simon
>