From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sat, 18 Jun 2016 02:44:48 +0200
Subject: [U-Boot] [PATCH] dm: ehci-mx6: support driver model
In-Reply-To: <CAPnjgZ2nMefpHmTjaPj+QnLXSopakdStU1OyAVphxN=hTVWPnA@mail.gmail.com>
References: <1466144367-32702-1-git-send-email-peng.fan@nxp.com>
 <CAPnjgZ2nMefpHmTjaPj+QnLXSopakdStU1OyAVphxN=hTVWPnA@mail.gmail.com>
Message-ID: <57649980.3030701@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 06/18/2016 12:59 AM, Simon Glass wrote:
> Hi Peng,
> 
> On 17 June 2016 at 00:19, Peng Fan <van.freenix@gmail.com> wrote:
>> Support driver model for ehci mx6 driver.
>> Consolidate code to be shared between DM and non-DM, such as
>> introducing ehci_mx6_common_init.
>> For simplicity, some old fasion code are keeped for DM usage,
>> such as board_ehci_power and board_usb_phy_mode. And 'dr-mode',
>> usbphy and vbus handling code for DM is not added now.
>> These will be added in future patches.
>>
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>> Cc: Marek Vasut <marex@denx.de>
>> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
>> Cc: Stefan Agner <stefan@agner.ch>
>> Cc: Simon Glass <sjg@chromium.org>
>> ---
>>  drivers/usb/host/ehci-mx6.c | 144 +++++++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 130 insertions(+), 14 deletions(-)
> 
> Reviewed-by: Simon Glass <sjg@chromium.org>
> 
> Good start. Do you have a plan to drop the board_...() functions?

Applied to u-boot-usb/next, thanks


-- 
Best regards,
Marek Vasut