* [U-Boot] Setting CONFIG_BOOTDELAY=2 for xilinx boards
@ 2016-06-20 8:12 Masahiro Yamada
2016-06-20 9:01 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Masahiro Yamada @ 2016-06-20 8:12 UTC (permalink / raw)
To: u-boot
Hi Michal,
I see CONFIG_BOOTDELAY=3 in the defconfigs you are maintaining.
If it is no problem,
can you drop "CONFIG_BOOTDELAY=3", please?
I did so for my boards. Please see my patch:
http://patchwork.ozlabs.org/patch/636878/
I have Zynq Zedboard, and
I am quite sure CONFIG_BOOTDELAY=2 (, which is now the default of Kconfig)
should work for it,
but I think you have better access to other Xilinx boards
(including Avnet boards with Xilinx SoC).
Thanks.
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Setting CONFIG_BOOTDELAY=2 for xilinx boards
2016-06-20 8:12 [U-Boot] Setting CONFIG_BOOTDELAY=2 for xilinx boards Masahiro Yamada
@ 2016-06-20 9:01 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2016-06-20 9:01 UTC (permalink / raw)
To: u-boot
hi,
2 or 3 sec are not doing difference. No problem to do it.
Thanks,
Michal
On 20.6.2016 10:12, Masahiro Yamada wrote:
> Hi Michal,
>
>
> I see CONFIG_BOOTDELAY=3 in the defconfigs you are maintaining.
>
> If it is no problem,
> can you drop "CONFIG_BOOTDELAY=3", please?
>
>
> I did so for my boards. Please see my patch:
> http://patchwork.ozlabs.org/patch/636878/
>
>
> I have Zynq Zedboard, and
> I am quite sure CONFIG_BOOTDELAY=2 (, which is now the default of Kconfig)
> should work for it,
> but I think you have better access to other Xilinx boards
> (including Avnet boards with Xilinx SoC).
>
>
> Thanks.
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-20 9:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-20 8:12 [U-Boot] Setting CONFIG_BOOTDELAY=2 for xilinx boards Masahiro Yamada
2016-06-20 9:01 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox