From: Heiko Schocher invitel <heiko.schocher@invitel.hu>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] i2c_eeprom: Add reading support
Date: Wed, 29 Jun 2016 08:16:49 +0200 [thread overview]
Message-ID: <577367D1.8080103@invitel.hu> (raw)
In-Reply-To: <20160622131416.15585-1-mario.six@gdsys.cc>
Hello Mario,
Am 22.06.2016 um 15:14 schrieb Mario Six:
> From: "mario.six at gdsys.cc" <mario.six@gdsys.cc>
>
> This patch implements the reading functionality for the generic I2C
> EEPROM driver, which was just a non-functional stub until now.
>
> Since the page size will be of importance for the writing support, we
> add suitable members to the private data structure to keep track of it.
>
> Compatibility strings for a range of at24c* chips are added.
>
> Signed-off-by: Mario Six <mario.six@gdsys.cc>
> ---
>
> Changes in v2:
> - Simplified and documented the i2c_eeprom struct
> - Simplified the read function
> - Corrected Kconfig dependency (from DM to MISC)
>
> ---
> drivers/misc/Kconfig | 5 +++++
> drivers/misc/i2c_eeprom.c | 39 +++++++++++++++++++++++++++++++--------
> include/i2c_eeprom.h | 4 ++++
> 3 files changed, 40 insertions(+), 8 deletions(-)
Thanks!
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 2373037..b84e351 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -144,4 +144,9 @@ config QFW
> Hidden option to enable QEMU fw_cfg interface. This will be selected by
> either CONFIG_CMD_QFW or CONFIG_GENERATE_ACPI_TABLE.
>
> +config I2C_EEPROM
> + bool "Enable driver for generic I2C-attached EEPROMs"
> + depends on MISC
> + help
> + Enable a generic driver for EEPROMs attached via I2C.
> endmenu
> diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
> index 814134a..c9f4174 100644
> --- a/drivers/misc/i2c_eeprom.c
> +++ b/drivers/misc/i2c_eeprom.c
> @@ -13,7 +13,7 @@
> static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf,
> int size)
> {
> - return -ENODEV;
> + return dm_i2c_read(dev, offset, buf, size);
> }
>
> static int i2c_eeprom_write(struct udevice *dev, int offset,
> @@ -27,23 +27,46 @@ struct i2c_eeprom_ops i2c_eeprom_std_ops = {
> .write = i2c_eeprom_write,
> };
>
> +static int i2c_eeprom_std_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct i2c_eeprom *priv = dev_get_priv(dev);
> + u64 data = dev_get_driver_data(dev);
> +
> + /* 6 bit -> page size of up to 2^63 (should be sufficient) */
> + priv->pagewidth = data & 0x3F;
> + priv->pagesize = (1 << priv->pagewidth);
> +
> + return 0;
> +}
> +
> int i2c_eeprom_std_probe(struct udevice *dev)
> {
> return 0;
> }
>
> static const struct udevice_id i2c_eeprom_std_ids[] = {
> - { .compatible = "i2c-eeprom" },
> + { .compatible = "i2c-eeprom", .data = 0 },
> + { .compatible = "atmel,24c01a", .data = 3 },
> + { .compatible = "atmel,24c02", .data = 3 },
> + { .compatible = "atmel,24c04", .data = 4 },
> + { .compatible = "atmel,24c08a", .data = 4 },
> + { .compatible = "atmel,24c16a", .data = 4 },
> + { .compatible = "atmel,24c32", .data = 5 },
> + { .compatible = "atmel,24c64", .data = 5 },
> + { .compatible = "atmel,24c128", .data = 6 },
> + { .compatible = "atmel,24c256", .data = 6 },
> + { .compatible = "atmel,24c512", .data = 6 },
> { }
> };
>
> U_BOOT_DRIVER(i2c_eeprom_std) = {
> - .name = "i2c_eeprom",
> - .id = UCLASS_I2C_EEPROM,
> - .of_match = i2c_eeprom_std_ids,
> - .probe = i2c_eeprom_std_probe,
> - .priv_auto_alloc_size = sizeof(struct i2c_eeprom),
> - .ops = &i2c_eeprom_std_ops,
> + .name = "i2c_eeprom",
> + .id = UCLASS_I2C_EEPROM,
> + .of_match = i2c_eeprom_std_ids,
> + .probe = i2c_eeprom_std_probe,
> + .ofdata_to_platdata = i2c_eeprom_std_ofdata_to_platdata,
> + .priv_auto_alloc_size = sizeof(struct i2c_eeprom),
> + .ops = &i2c_eeprom_std_ops,
> };
>
> UCLASS_DRIVER(i2c_eeprom) = {
> diff --git a/include/i2c_eeprom.h b/include/i2c_eeprom.h
> index ea6c962..0452892 100644
> --- a/include/i2c_eeprom.h
> +++ b/include/i2c_eeprom.h
> @@ -14,6 +14,10 @@ struct i2c_eeprom_ops {
> };
>
> struct i2c_eeprom {
> + /* The EEPROM's page size in byte */
> + unsigned long pagesize;
> + /* The EEPROM's page width in bits (pagesize = 2^pagewidth) */
> + unsigned pagewidth;
> };
>
> #endif
> --
> 2.7.0.GIT
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
next prev parent reply other threads:[~2016-06-29 6:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-22 13:14 [U-Boot] [PATCH v2] i2c_eeprom: Add reading support Mario Six
2016-06-26 2:53 ` Simon Glass
2016-06-29 6:16 ` Heiko Schocher invitel [this message]
2016-07-23 0:10 ` [U-Boot] [U-Boot,v2] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=577367D1.8080103@invitel.hu \
--to=heiko.schocher@invitel.hu \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox