From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?UTF-8?Q?Andreas_F=c3=a4rber?= <afaerber@suse.de>
Date: Mon, 11 Jul 2016 22:15:54 +0200
Subject: [U-Boot] [PATCH v7 0/4] Amlogic Meson GXBaby and ODROID-C2
 support
In-Reply-To: <20160711194858.GA12930@gmail.com>
References: <1462689017-3160-1-git-send-email-b.galvani@gmail.com>
 <57831945.2040009@suse.de>
 <CALeDE9OM__RZT7Re1+bHn0h41Hku9=k_yj_0hqiW8REjsYx0Uw@mail.gmail.com>
 <20160711194858.GA12930@gmail.com>
Message-ID: <5783FE7A.9070400@suse.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Am 11.07.2016 um 21:48 schrieb Beniamino Galvani:
> On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote:
>> On Mon, Jul 11, 2016 at 4:57 AM, Andreas F?rber <afaerber@suse.de> wrote:
>>> Last output:
>>>
>>> NOTICE:  BL3-1: v1.0(debug):4d2e34d
>>> NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
>>> INFO:    BL3-1: Initializing runtime services
>>> INFO:    BL3-1: Preparing for EL3 exit to normal world
>>> INFO:    BL3-1: Next image address = 0x1000000
>>> INFO:    BL3-1: Next image spsr = 0x3c9
>>>
>>> I.e., no U-Boot SPL output on serial.
>>
>> I see similar on Pine64 with 2016.07rc3
> 
> Here the first non-booting commit is:
> 
> commit d73718f3236c520a92efa401084c658e6cc067f3
> Author: Mingkai Hu <mingkai.hu@nxp.com>
> Date:   Thu Jul 7 12:22:12 2016 +0800
> 
>     armv8: Enable CPUECTLR.SMPEN for coherency

Thanks! With that reverted I get:

[...]
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9
No match for driver 'eth_designware'
Some drivers were not found


U-Boot 2016.07-00001-g10a9e48 (Jul 11 2016 - 21:58:13 +0200) odroid-c2

DRAM:  2 GiB
No maUsing default environment

In:    serial at 4c0
Out:   serial at 4c0
Err:   serial at 4c0
Net:   No ethernet found.
=>

The eth_designware line (twice, if counting "No ma") is due to what Tom
mentioned wrt DM GPIO, I guess.

Shouldn't we get a version line from SPL, too? A serial driver issue?

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)