[U-Boot] [PATCH v5] rockchip: add option to change method of loading u-boot

[Ziyuan Xu <xzy.xu@rock-chips.com>]

hi Simon,

On 2016?07?12? 21:28, Simon Glass wrote:
> On 12 July 2016 at 05:09, Ziyuan Xu <xzy.xu@rock-chips.com> wrote:
>> From: Xu Ziyuan <xzy.xu@rock-chips.com>
>>
>> If we would like to boot from SD card, we have to implement mmc driver
>> in SPL stage, and get a slightly large SPL binary. Rockchip SoC's
>> bootrom code has the ability to load spl and u-boot, then boot.
>>
>> If CONFIG_ROCKCHIP_SPL_BACK_TO_BROM is enabled, the spl will return to
>> bootrom in board_init_f(), then bootrom loads u-boot binary.
>>
>> Loading sequence after rework:
>> bootrom ==> spl ==> bootrom ==> u-boot
>>
>> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
>> Acked-by: Simon Glass <sjg@chromium.org>
>> ---
>>
>> Changes in v5:
>> - Revise some typos
>>
>> Changes in v4:
>> - Add acked flag from Simon
>> - Rename to CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
>> - Add Kconfig option for this feature support
>> - Revise some nits
>> - Update comments a little
>> - Update commit message
>>
>> Changes in v3:
>> - Add CONFIG_ROCKCHIP_RK3288_SPL_BACKTO_BROM for enabling this feature
>> - Update doc/README.rockchip to instruct how to use it
>> - Detailed commit message
>>
>> Changes in v2:
>> - Add sdcard iomux initlization in board_init() to fix sdmmc command
>> sending timeout issue when booting from eMMC
>>
>>   arch/arm/mach-rockchip/Kconfig                     |  8 ++++++
>>   arch/arm/mach-rockchip/Makefile                    |  1 +
>>   arch/arm/mach-rockchip/board.c                     | 33 ++++++++++++++++++++++
>>   arch/arm/mach-rockchip/rk3036/Makefile             |  1 -
>>   arch/arm/mach-rockchip/rk3288-board-spl.c          |  5 +++-
>>   .../mach-rockchip/{rk3036 => }/save_boot_param.S   |  2 +-
>>   doc/README.rockchip                                | 14 +++++++++
>>   include/configs/rk3288_common.h                    |  5 ++++
>>   8 files changed, 66 insertions(+), 3 deletions(-)
>>   rename arch/arm/mach-rockchip/{rk3036 => }/save_boot_param.S (90%)
> I fixed several typos in the Kconfig help, so ended up rewording it a
> little. Your patches are good but please can you take a little more
> time to read them before sending? Also please use "U-Boot"
> consistently instead of u-boot, U-BOOT, etc. I am not claiming to be
> perfect here either - in fact I am quite bad with typos sometimes. But
> a read through will often reduce their number.
>
> Fixed, and:
>
> Applied to u-boot-rockchip, thanks!
Thanks for your help, I will be more carefully. :-)
[snip]
A nit should be fixed.

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index d1c0dde..cf718fa 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -22,7 +22,7 @@ config ROCKCHIP_SPL_BACK_TO_BROM
         default y if ROCKCHIP_RK3036
         help
           Rockchip SoCs have ability to load SPL & U-Boot binary. If 
enabled,
-          SPL will return to the boot rom, whch will then load the U-Boot
+          SPL will return to the boot rom, which will then load the U-Boot
            binary to keep going on.
>
>
>