[U-Boot] [mips][cfi] Unable to write into flash under qemu

[Stefan Roese <sr@denx.de>]

Hi Alon, Hi Daniel,

On 10.07.2016 22:50, Alon Bar-Lev wrote:
> On 5 July 2016 at 19:10, Daniel Schwierzeck
> <daniel.schwierzeck@gmail.com> wrote:
>>
>> Hi Alon,
>>
>> +cc Paul, Stefan
>>
>> Am 05.07.2016 um 14:04 schrieb Alon Bar-Lev:
>>> Hi,
>>>
>>> Found the debug setting.
>>>
>>> When I try to erase flash under qemu I get the following error, the
>>> erase actually succeeds in the backed file, I see sector as 0xff.
>>>
>>> Can anyone check if problem is within u-boot or qemu?
>>>
>>> Thanks!
>>
>> I've found the problem. Paul sent a fix [1] for pflash in June 2013
>> to make 32 Bit access working with YAMON bootloader.
>>
>> The fix mirrors the flash status value in the upper 16 Bits of the return
>> value. Thus U-Boot gets a value of 0x800080 in flash_full_status_check()
>> after a block erase command. U-Boot compares the status value in
>> flash_isequal() with the expected value of 0x80 but that fails.
>>
>> Because of this I think pflash support for Malta is broken since Qemu 1.6.0.
>>
>> A possible fix could be this:
>
> Hi,
> Thanks again.
> How do we merge this fix?

Daniel, could you please send a proper patch (non-inlined) for this so
that I can push it to upstream? Or did I miss this patch?

Thanks,
Stefan