From: stefano babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
Date: Thu, 21 Jul 2016 10:48:21 +0200 [thread overview]
Message-ID: <57908C55.9050005@denx.de> (raw)
In-Reply-To: <CAOMZO5ADg5y0g127CsSPG+aMy4Q7U2UdCBDPbMP=WPHymNVH+A@mail.gmail.com>
Hi Breno,
Am 20.07.2016 um 22:20 schrieb Fabio Estevam:
> On Wed, Jul 20, 2016 at 4:55 PM, Breno Lima <breno.lima@nxp.com> wrote:
>> Commit c1ebf54868359005 ("imx_common: Return MMCSD_MODE_FS in spl_boot_mode()
>> also for EXTFS") causes SPL breakage on wandboard:
>>
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ERROR: v7_dcache_inval_range - start address is not aligned - 0x1820006c
>> ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1820086c
>> ** First descriptor is NOT a primary desc on 0:1 **
>> spl: no partition table found
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> This error is seen when SPL and u-boot.img are stored in the raw SD card
>> partition.
>>
>> This reverts commit c1ebf54868359005c32944c1473668d5fcaca158.
>>
>> Signed-off-by: Breno Lima <breno.lima@nxp.com>
> Thanks for the fix:
>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
prev parent reply other threads:[~2016-07-21 8:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 19:55 [U-Boot] [PATCH] Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS" Breno Lima
2016-07-20 20:20 ` Fabio Estevam
2016-07-21 8:48 ` stefano babic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57908C55.9050005@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox