[U-Boot] [PATCH v7] mmc: atmel_sdhci: Convert to the driver model support

[Jaehoon Chung <jh80.chung@samsung.com>]

On 07/22/2016 12:21 PM, Simon Glass wrote:
> Hi,
> 
> On 20 July 2016 at 22:16, Jaehoon Chung <jh80.chung@samsung.com> wrote:
>> Hi Wenyuo,
>>
>> On 07/20/2016 07:04 PM, Wenyou Yang wrote:
>>> Convert the driver to the driver model while retaining the existing
>>> legacy code. This allows the driver to support boards that have
>>> converted to driver model as well as those that have not.
>>>
>>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
>>> Reviewed-by: Simon Glass <sjg@chromium.org>
>>> ---
>>>
>>> Changes in v7:
>>>  - Add support for using driver model for block devices and MMC operations.
>>>  - Change clk_client.h -> clk.h to adapt to clk API conversion.
>>>
>>> Changes in v6:
>>>  - Remove unnecessary white space.
>>>  - Use sdhci_read(), instead of readl().
>>>  - Remove the local variables min_clk.
>>>
>>> Changes in v5:
>>>  - Add Reviewed-by tag.
>>>
>>> Changes in v4:
>>>  - Update the clk API based on [PATCH] clk: convert API to match
>>>    reset/mailbox fstyle (http://patchwork.ozlabs.org/patch/625342/).
>>>  - Remove check on dev_get_parent() return.
>>>  - Fixed the return value, such as -ENODEV->-EINVAL.
>>>
>>> Changes in v3:
>>>  - Remove the redundant log print.
>>>
>>> Changes in v2:
>>>  - Add clock support, include enabling peripheral clock and
>>>    generated clock.
>>>  - Retain the existing legacy code to support boards which have not
>>>    converted to driver model.
>>>
>>>  drivers/mmc/Kconfig       |  10 ++++
>>>  drivers/mmc/atmel_sdhci.c | 125 ++++++++++++++++++++++++++++++++++++++++++++++
>>>  include/sdhci.h           |   2 +
>>>  3 files changed, 137 insertions(+)
>>>
>>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
>>> index 79cf18f..49b325e 100644
>>> --- a/drivers/mmc/Kconfig
>>> +++ b/drivers/mmc/Kconfig
>>> @@ -34,6 +34,16 @@ config MSM_SDHCI
>>>            SD 3.0 specifications. Both SD and eMMC devices are supported.
>>>         Card-detect gpios are not supported.
>>>
>>> +config ATMEL_SDHCI
>>> +     bool "Atmel SDHCI controller support"
>>> +     depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
>>> +     help
>>> +       This enables support for the Atmel SDHCI controller, which supports
>>> +       the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
>>> +       Memory Card Specification V3.0, and the SDIO V3.0 specification.
>>> +       It is compliant with the SD Host Controller Standard V3.0
>>> +       specification.
>>> +
>>>  config ROCKCHIP_DWMMC
>>>       bool "Rockchip SD/MMC controller support"
>>>       depends on DM_MMC && OF_CONTROL
>>> diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c
>>> index 24b68b6..977f6ef 100644
>>> --- a/drivers/mmc/atmel_sdhci.c
>>> +++ b/drivers/mmc/atmel_sdhci.c
>>> @@ -6,12 +6,15 @@
>>>   */
>>>
>>>  #include <common.h>
>>> +#include <clk.h>
>>> +#include <dm.h>
>>
>> If it doesn't use DM_MMC, then doesn't it need to include dm.h?
> 
> Please don't put #idefs around header files, particularly this one. It
> just clutters the code. We can put logic in header files if needed.
> Eventually most files will include dm.h.

Agreed! Thanks for explanation.

Best Regards,
Jaehoon Chung

> 
>>
>>>  #include <malloc.h>
>>>  #include <sdhci.h>
>>>  #include <asm/arch/clk.h>
>>>
>>>  #define ATMEL_SDHC_MIN_FREQ  400000
> 
> Regards,
> Simon
> 
> 
>