public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data
Date: Mon, 25 Jul 2016 13:55:09 +0900	[thread overview]
Message-ID: <57959BAD.2010304@samsung.com> (raw)
In-Reply-To: <20160712145514.5205871f@amdc2363>

Hi All,

On 07/12/2016 09:55 PM, Lukasz Majewski wrote:
> Hi Jaehoon,
> 
>> There is no data, it doesn't needs to wait for completing data
>> transfer. (It seems that it can be removed.)
>> Almost all timeout error is occured from stop command without data.
>> After applied this patch, I hope that we don't need to increase
>> timeout value anymore.
> 
> This patch fixes issue (in a better way) for Odroid U3 write
> performance (http://patchwork.ozlabs.org/patch/646932/) and hence
> should be used.
> 

Is there any other opinion for this patch?
Who is maintaining u-boot-mmc? Is Pantelis still maintaining u-boot-mmc?

Who can apply this patch and patch relevant to mmc?

Best Regards,
Jaehoon Chung

> 
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> ---
>>  drivers/mmc/sdhci.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
>> index 604f18d..0a38a56 100644
>> --- a/drivers/mmc/sdhci.c
>> +++ b/drivers/mmc/sdhci.c
>> @@ -175,7 +175,8 @@ static int sdhci_send_command(struct mmc *mmc,
>> struct mmc_cmd *cmd, flags = SDHCI_CMD_RESP_LONG;
>>  	else if (cmd->resp_type & MMC_RSP_BUSY) {
>>  		flags = SDHCI_CMD_RESP_SHORT_BUSY;
>> -		mask |= SDHCI_INT_DATA_END;
>> +		if (data)
>> +			mask |= SDHCI_INT_DATA_END;
>>  	} else
>>  		flags = SDHCI_CMD_RESP_SHORT;
>>  
> 
> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
> 
> Test HW: Odroid U3 (Exynos4):
> 
> Odroid # ext4load mmc 0:2 0x41000000 dat_31M.img
> 32505856 bytes read in 1471 ms (21.1 MiB/s)
> Odroid # ext4write mmc 0:2 0x41000000 /dat_w55.img 0x1f00000
> File System is consistent
> update journal finished
> 32505856 bytes written in 3528 ms (8.8 MiB/s)
> 
> Performance improvement is even better than with previously proposed
> patches.
> 
> Test HW: Odroid XU3 (Exynos5):
> 
> ODROID-XU3 # ext4load mmc 0:2 0x41000000 dat_31M.img
> 32505856 bytes read in 6309 ms (4.9 MiB/s)
> ODROID-XU3 # ext4write mmc 0:2 0x41000000 /dat_w1.img 0x1f00000
> File System is consistent
> update journal finished
> 32505856 bytes written in 4884 ms (6.3 MiB/s)
> 
> 

  reply	other threads:[~2016-07-25  4:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-12 12:18 [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Jaehoon Chung
2016-07-12 12:18 ` [U-Boot] [PATCH 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B Jaehoon Chung
2016-07-12 12:55   ` Lukasz Majewski
2016-08-05  2:24   ` [U-Boot] [U-Boot, " Jaehoon Chung
2016-07-12 12:55 ` [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Lukasz Majewski
2016-07-25  4:55   ` Jaehoon Chung [this message]
2016-07-25 10:10     ` Minkyu Kang
2016-07-25 10:21     ` Lukasz Majewski
2016-07-25 23:23       ` Steve Rae
2016-07-25 23:28         ` Steve Rae
2016-07-26  9:13         ` Lukasz Majewski
2016-07-26 16:10           ` Steve Rae
2016-07-27  5:11             ` Jaehoon Chung
2016-08-01 10:05     ` Lukasz Majewski
2016-08-05  2:24 ` [U-Boot] [U-Boot, " Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57959BAD.2010304@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox