From: Srinivas, Madan <madans@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue
Date: Wed, 24 Aug 2016 16:41:22 -0400 [thread overview]
Message-ID: <57BE0672.4030300@ti.com> (raw)
From: Madan Srinivas <madans@ti.com>
An issue in the TI secure image generation tool causes the ROM to
load the SPL at a different load address than what is specified by
CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices.
This causes the SPL to fail on secure devices during peripheral
boot.
The TI secure image generation tool has been fixed so that the SPL
will always be loaded at 0x403018E0 by the ROM code for both
peripheral and memory boot modes.
Signed-off-by: Madan Srinivas <madans@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
---
configs/am43xx_hs_evm_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/am43xx_hs_evm_defconfig
b/configs/am43xx_hs_evm_defconfig
index 1553196..a1453fd 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
# Device tree file can be same on HS evm
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
CONFIG_SPL=y
-CONFIG_ISW_ENTRY_ADDR=0x40302ae0
+CONFIG_ISW_ENTRY_ADDR=0x403018e0
CONFIG_SPL_STACK_R=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND"
--
2.7.4
next reply other threads:[~2016-08-24 20:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-24 20:41 Srinivas, Madan [this message]
2016-08-29 12:01 ` [U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue Tom Rini
2016-09-07 17:58 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57BE0672.4030300@ti.com \
--to=madans@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox