[U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue

[U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue

[Srinivas, Madan]

From: Madan Srinivas <madans@ti.com>

An issue in the TI secure image generation tool causes the ROM to
load the SPL at a different load address than what is specified by
CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices.

This causes the SPL to fail on secure devices during peripheral
boot.

The TI secure image generation tool has been fixed so that the SPL
will always be loaded at 0x403018E0 by the ROM code for both
peripheral and memory boot modes.

Signed-off-by: Madan Srinivas <madans@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
---

  configs/am43xx_hs_evm_defconfig | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/am43xx_hs_evm_defconfig 
b/configs/am43xx_hs_evm_defconfig
index 1553196..a1453fd 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
  # Device tree file can be same on HS evm
  CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
  CONFIG_SPL=y
-CONFIG_ISW_ENTRY_ADDR=0x40302ae0
+CONFIG_ISW_ENTRY_ADDR=0x403018e0
  CONFIG_SPL_STACK_R=y
  CONFIG_FIT=y
  CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND"
-- 
2.7.4

[U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue

[Tom Rini]

On Wed, Aug 24, 2016 at 04:41:22PM -0400, Srinivas, Madan wrote:

> From: Madan Srinivas <madans@ti.com>
> 
> An issue in the TI secure image generation tool causes the ROM to
> load the SPL at a different load address than what is specified by
> CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices.
> 
> This causes the SPL to fail on secure devices during peripheral
> boot.
> 
> The TI secure image generation tool has been fixed so that the SPL
> will always be loaded at 0x403018E0 by the ROM code for both
> peripheral and memory boot modes.
> 
> Signed-off-by: Madan Srinivas <madans@ti.com>
> Reviewed-by: Nishanth Menon <nm@ti.com>
> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160829/636fe72c/attachment.sig>

[U-Boot] configs: am4xhs: Modify SPL load address to fix UART boot issue

[Tom Rini]

On Wed, Aug 24, 2016 at 04:41:22PM -0400, Srinivas, Madan wrote:

> From: Madan Srinivas <madans@ti.com>
> 
> An issue in the TI secure image generation tool causes the ROM to
> load the SPL at a different load address than what is specified by
> CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices.
> 
> This causes the SPL to fail on secure devices during peripheral
> boot.
> 
> The TI secure image generation tool has been fixed so that the SPL
> will always be loaded at 0x403018E0 by the ROM code for both
> peripheral and memory boot modes.
> 
> Signed-off-by: Madan Srinivas <madans@ti.com>
> Reviewed-by: Nishanth Menon <nm@ti.com>
> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160907/5e350f81/attachment.sig>