From: Hannes Schmelzer <hannes@schmelzer.or.at>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config
Date: Wed, 31 Aug 2016 18:06:35 +0200 [thread overview]
Message-ID: <57C7008B.6080900@schmelzer.or.at> (raw)
In-Reply-To: <20160830190629.13956-2-afd@ti.com>
On 08/30/2016 09:06 PM, Andrew F. Davis wrote:
> The config option AM33XX is used in several boards and should be
> defined as a stand-alone option for this SOC. We break this out
> from target boards that use this SoC and common headers then enable
> AM33XX on in all the boards that used these targets to eliminate any
> functional change with this patch.
>
> This is similar to what has already been done in
> 9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig")
> and is done for the same reasons.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
> arch/arm/Kconfig | 98 ++++--------------------------
> arch/arm/cpu/armv7/am33xx/Kconfig | 86 ++++++++++++++++++++++++++
> configs/am335x_baltos_defconfig | 1 +
> configs/am335x_boneblack_defconfig | 1 +
> configs/am335x_boneblack_vboot_defconfig | 1 +
> configs/am335x_evm_defconfig | 1 +
> configs/am335x_evm_nor_defconfig | 1 +
> configs/am335x_evm_norboot_defconfig | 1 +
> configs/am335x_evm_spiboot_defconfig | 1 +
> configs/am335x_evm_usbspl_defconfig | 1 +
> configs/am335x_igep0033_defconfig | 1 +
> configs/am335x_shc_defconfig | 1 +
> configs/am335x_shc_ict_defconfig | 1 +
> configs/am335x_shc_netboot_defconfig | 1 +
> configs/am335x_shc_prompt_defconfig | 1 +
> configs/am335x_shc_sdboot_defconfig | 1 +
> configs/am335x_shc_sdboot_prompt_defconfig | 1 +
> configs/am335x_sl50_defconfig | 1 +
> configs/birdland_bav335a_defconfig | 1 +
> configs/birdland_bav335b_defconfig | 1 +
> configs/cm_t335_defconfig | 1 +
> configs/pcm051_rev1_defconfig | 1 +
> configs/pcm051_rev3_defconfig | 1 +
> configs/pengwyn_defconfig | 1 +
> configs/pepper_defconfig | 1 +
> include/configs/ti_am335x_common.h | 1 -
> 26 files changed, 120 insertions(+), 88 deletions(-)
Hi Andrew,
why is this "CONFIG_AM33XX" only done at related ti_am335x_common.h boards?
grep -r "#define CONFIG_AM33XX" *
include/configs/bur_am335x_common.h:#define CONFIG_AM33XX
include/configs/ti_am335x_common.h:#define CONFIG_AM33XX
include/configs/siemens-am33x-common.h:#define CONFIG_AM33XX
I'm responsible for the bur_am335x_common.h related boards.
cheers,
Hannes
next prev parent reply other threads:[~2016-08-31 16:06 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 19:06 [U-Boot] [PATCH v4 00/10] Allow secure boot on AM33xx devices Andrew F. Davis
2016-08-30 19:06 ` [U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
2016-08-31 3:26 ` Lokesh Vutla
2016-08-31 16:06 ` Hannes Schmelzer [this message]
2016-08-31 16:16 ` Andrew F. Davis
2016-08-31 17:45 ` Hannes Schmelzer
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 02/10] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
2016-08-31 3:26 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 03/10] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
2016-08-31 3:26 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 04/10] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
2016-08-31 3:27 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 05/10] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Andrew F. Davis
2016-08-31 3:28 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 06/10] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
2016-08-31 3:28 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 07/10] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Andrew F. Davis
2016-08-31 3:28 ` Lokesh Vutla
2016-09-02 14:53 ` Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 08/10] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
2016-08-31 3:28 ` Lokesh Vutla
2016-09-02 14:54 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 09/10] ti_armv7_common: Disable Falcon Mode on HS devices Andrew F. Davis
2016-08-31 3:29 ` Lokesh Vutla
2016-09-02 14:54 ` Tom Rini
2016-10-03 13:38 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-08-30 19:06 ` [U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
2016-08-31 3:30 ` Lokesh Vutla
2016-09-02 14:54 ` Tom Rini
2016-09-02 14:57 ` Andrew F. Davis
2016-09-02 14:58 ` Tom Rini
2016-09-07 18:04 ` Andrew F. Davis
2016-10-03 13:39 ` [U-Boot] [U-Boot, v4, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57C7008B.6080900@schmelzer.or.at \
--to=hannes@schmelzer.or.at \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox