[U-Boot] [PATCH v3 3/4] usb: dwc3: add support for 16 bit UTMI+ interface

[Kever Yang <kever.yang@rock-chips.com>]

On 08/31/2016 08:32 PM, Marek Vasut wrote:
> On 08/31/2016 10:40 AM, Kever Yang wrote:
>> The dwc3 controller is using 8 bit UTMI+ interface for USB2.0 PHY,
>> add one variable in dwc3/dwc3_device struct to support 16 bit
>> UTMI+ interface on some SoCs like Rockchip rk3399.
>>
>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>> ---
>>
>> Changes in v3:
>> - Parse the DT for utmi+ interface width in dwc3 driver
>>
>> Changes in v2:
>> - use a variable to identify utmi+ bus width instead of CONFIG MACRO
>>
>>   drivers/usb/dwc3/core.c | 18 ++++++++++++++++++
>>   drivers/usb/dwc3/core.h | 12 ++++++++++++
>>   2 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 85cc96a..b2c7eb1 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -16,6 +16,7 @@
>>   
>>   #include <common.h>
>>   #include <malloc.h>
>> +#include <fdtdec.h>
>>   #include <dwc3-uboot.h>
>>   #include <asm/dma-mapping.h>
>>   #include <linux/ioport.h>
>> @@ -29,6 +30,8 @@
>>   
>>   #include "linux-compat.h"
>>   
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>>   static LIST_HEAD(dwc3_list);
>>   /* -------------------------------------------------------------------------- */
>>   
>> @@ -388,6 +391,11 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
>>   	if (dwc->dis_u2_susphy_quirk)
>>   		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>>   
>> +	if (dwc->usb2_phyif_utmi_width == 16) {
>> +		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
>> +		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
>> +		reg |= DWC3_GUSB2PHYCFG_PHYIF_16BIT;
>> +	}
>>   	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>>   
>>   	mdelay(100);
>> @@ -621,6 +629,8 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>>   	int			ret;
>>   
>>   	void			*mem;
>> +	const void *blob = gd->fdt_blob;
>> +	int node;
>>   
>>   	mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
>>   	if (!mem)
>> @@ -682,6 +692,14 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>>   
>>   	dwc->index = dwc3_dev->index;
>>   
>> +	node = fdt_node_offset_by_compatible(blob, -1,
>> +			"rockchip,rk3399-xhci");
>> +	if (node < 0)
>> +		debug("%s dwc3 node not found\n", __func__);
>> +	else
>> +		dwc->usb2_phyif_utmi_width =
>> +			fdtdec_get_int(blob, node, "snps,phyif-utmi-bits", -1);
> This is OK, thanks!
>
>>   	dwc3_cache_hwparams(dwc);
>>   
>>   	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 72d2fcd..0c61c51 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -74,6 +74,7 @@
>>   #define DWC3_GCTL		0xc110
>>   #define DWC3_GEVTEN		0xc114
>>   #define DWC3_GSTS		0xc118
>> +#define DWC3_GUCTL1		0xc11c
>>   #define DWC3_GSNPSID		0xc120
>>   #define DWC3_GGPIO		0xc124
>>   #define DWC3_GUID		0xc128
>> @@ -162,7 +163,17 @@
>>   
>>   /* Global USB2 PHY Configuration Register */
>>   #define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
>> +#define DWC3_GUSB2PHYCFG_ENBLSLPM   (1 << 8)
>>   #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
>> +#define DWC3_GUSB2PHYCFG_PHYIF_8BIT	(0 << 3)
>> +#define DWC3_GUSB2PHYCFG_PHYIF_16BIT	(1 << 3)
>> +#define DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT	(10)
>> +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK	(0xf << \
>> +		DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
>> +#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \
>> +		DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
>> +#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \
>> +		DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
>>   
>>   /* Global USB3 PIPE Control Register */
>>   #define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
>> @@ -813,6 +824,7 @@ struct dwc3 {
>>   
>>   	unsigned		tx_de_emphasis_quirk:1;
>>   	unsigned		tx_de_emphasis:2;
>> +	unsigned		usb2_phyif_utmi_width:5;
> Shouldn't this be :1 ? 0 for 8bit, 1 for 16bit ?

Well, using 1 bit in next version.

Thanks,
- Kever

>
>>   	int			index;
>>   	struct list_head        list;
>>   };
>>
>