From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kever Yang Date: Tue, 06 Sep 2016 20:43:20 +0800 Subject: [U-Boot] [PATCH 6/7] dts: evb-rk3399: add init voltage node for vdd-center In-Reply-To: References: <1472526134-26965-1-git-send-email-kever.yang@rock-chips.com> <1472526134-26965-7-git-send-email-kever.yang@rock-chips.com> Message-ID: <57CEB9E8.4000601@rock-chips.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Simon, On 09/06/2016 09:04 AM, Simon Glass wrote: > Hi Kever, > > On 29 August 2016 at 21:02, Kever Yang wrote: >> This patch add regulator-init-microvolt for pwm regulator >> to get a init value when driver do probe init. > How about: > > Add a regulator-init-microvolt value for the vd_center regulator so that .... > > (please complete the sentence - commits should explain why they are > needed if it isn't obvious) > OK, will update in next version patch. Thanks, - Kever >> Signed-off-by: Kever Yang >> --- >> >> arch/arm/dts/rk3399-evb.dts | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts >> index bd7801b..fa60e19 100644 >> --- a/arch/arm/dts/rk3399-evb.dts >> +++ b/arch/arm/dts/rk3399-evb.dts >> @@ -23,6 +23,7 @@ >> regulator-name = "vdd_center"; >> regulator-min-microvolt = <800000>; >> regulator-max-microvolt = <1400000>; >> + regulator-init-microvolt = <950000>; >> regulator-always-on; >> regulator-boot-on; >> status = "okay"; >> -- >> 1.9.1 >> > Regards, > Simon > > >