[U-Boot] [PATCH v3 5/7] arm: mach-keystone: config.mk: Adds support for secure, images on K2

[U-Boot] [PATCH v3 5/7] arm: mach-keystone: config.mk: Adds support for secure, images on K2

[Srinivas, Madan]

Adds an additional image type needed for supporting secure keystone
devices. The build generates u-boot_HS_MLO which can be used to boot
from all media on secure keystone devices.

Signed-off-by: Madan Srinivas <madans@ti.com>

Cc: Andrew F. Davis <afd@ti.com>
---

Changes in v3:
- Corrects commit message in patch 5/7 in this series to refer
   to u-boot_HS_MLO

Changes in v2:
- Changes the target for secure keystone devices in config.mk
   to u-boot_HS_MLO to keep it in line with the MLO target that
   is built for non-secure keystone devices.

  arch/arm/mach-keystone/config.mk | 6 ++++++
  1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-keystone/config.mk 
b/arch/arm/mach-keystone/config.mk
index 9ae1e9a..32fef42 100644
--- a/arch/arm/mach-keystone/config.mk
+++ b/arch/arm/mach-keystone/config.mk
@@ -5,9 +5,15 @@
  # SPDX-License-Identifier:     GPL-2.0+
  #

+include  $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
+
  ifndef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ALL-y += u-boot_HS_MLO
+else
  ALL-y += MLO
  endif
+endif

  MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
  	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
-- 
2.7.4