[U-Boot] [PATCH 0/2] Add sdram capacity auto detect for rk3288

[Kever Yang <kever.yang@rock-chips.com>]

Hi Sandy,

On 09/19/2016 09:33 PM, Sandy Patterson wrote:
> Hi Kever and Vagrant,
>
> I tested this patch on my rock2 board against 2016.09. (I didn't have 
> my board with me over the weekend)

Thanks for your test and for your log, my source code do have one bug 
and I have fix and upload the V2 patch set.

>
> 1) It seems the BACK_TO_BROM feature is broken. It doesn't boot using 
> the 2016.09. I'm afraid I don't have the time to track it down.
It works fine on my evb, do you flash the image correctly? it's 
different with the way you don't use BACK_TO_BROM.

Regards,
- Kever
> 2) It seems the SPL is still small enough to test this feature. 
> (vagrant you can forget about the back to brom feature unless you need 
> more SPL space).
>
> 3) I get the same behavior as Vagrant on the rock2 board. I'm 
> including DEBUG output in case that helps Kever. I tried to trace it, 
> but it seems a larger undertaking than I can manage right now. 
> (vagrant, you can add DEBUG #define's into the 
> file include/configs/firefly-rk3288.h to get the output below.. my 
> guess is it's similar.)
>
> This trace is almost exactly the same between enabling the SDRAM 
> detection and not. I marked the point where it halts. The fdt is a 
> slightly different size, but that is expected.
>
> Sandy
>
>
> initcall: 0010af55
> U-Boot code: 00100000 -> 0014F8C0  BSS: -> 0018D1B8
> initcall: 0010add1
> initcall: 0010b359
> Model: Radxa Rock 2 Square
> initcall: 0010af95
> DRAM:  initcall: 00100d19
> malloc_simple: size=3c, ptr=7d8, limit=2000: fe79c
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
>    - -1 -1
>    - not found
> fdtdec_get_int_array: interrupts
> get_prop_check_min_len: interrupts
> malloc_simple: size=4, ptr=7dc, limit=2000: fe7d8
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
>    - -1 1
>    - -1 -1
>    - -1 0
>    - found
> uclass_find_device_by_seq: 0 1
>    - -1 1
>    - found
> uclass_find_device_by_seq: 0 2
>    - -1 1
>    - -1 -1
>    - -1 0
>    - -1 -1
>    - not found
> fdtdec_get_int_array: interrupts
> get_prop_check_min_len: interrupts
> malloc_simple: size=14, ptr=7f0, limit=2000: fe7dc
> malloc_simple: size=4, ptr=7f4, limit=2000: fe7f0
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
>    - -1 1
>    - -1 -1
>    - -1 0
>    - found
> uclass_find_device_by_seq: 0 1
>    - -1 1
>    - found
> uclass_find_device_by_seq: 0 2
>    - -1 1
>    - -1 -1
>    - -1 0
>    - -1 2
>    - found
> uclass_find_device_by_seq: 0 3
>    - -1 1
>    - -1 -1
>    - -1 0
>    - -1 2
>    - not found
> fdtdec_get_int_array: interrupts
> get_prop_check_min_len: interrupts
> malloc_simple: size=14, ptr=808, limit=2000: fe7f4
> malloc_simple: size=c, ptr=814, limit=2000: fe808
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
>    - -1 -1
>    - not found
> fdtdec_get_int_array: interrupts
> get_prop_check_min_len: interrupts
> OF: ** translation for device clock-controller at ff760000 **
> OF: bus is default (na=1, ns=1) on
> OF: translating address: 000076ff
> OF: reached root node
> clk_request(dev=000fe474, clk=000fe7bc)
> SDRAM base=0, size=80000000
> initcall: 0010b129
> Monitor len: 0008D1B8
> Ram size: 80000000
> Ram top: 80000000
> initcall: 0010adf1
> initcall: 0010af0d
> TLB table from 7fff0000 to 7fff4000
> initcall: 0010af75
> video_reserve: Reserving 4f0000 bytes at 7fb00000 for video device 
> 'vop at ff940000'
> Video frame buffers from 7fb00000 to 7fff0000
> initcall: 0010ae05
> initcall: 0010aecd
> Reserving 564k for U-Boot at: 7fa72000
> initcall: 0010aea5
> Reserving 32776k for malloc() at: 7da70000
> initcall: 0010b059
> Reserving 80 Bytes for Board Info at: 7da6ffb0
> initcall: 0010ae09
> initcall: 0010ae7d
> Reserving 200 Bytes for Global Data at: 7da6fee8
> initcall: 0010ae2d
> Reserving 38464 Bytes for FDT at: 7da668a8
> initcall: 0010ae11
> initcall: 0010b18d
> initcall: 0010b113
> initcall: 0010b099
>
> RAM Configuration:
> ====== SDRAM DETECTION FEATURE HALTS HERE ========
> Bank #0: 0 2 GiB
>
> DRAM:  2 GiB
> initcall: 0010ae19
> New Stack Pointer is: 7da66880
> initcall: 0010b02d
> initcall: 0010afd5
> Relocation Offset is: 7f972000
> Relocating to 7fa72000, new gd at 7da6fee8, sp at 7da66880
> initcall: 7fa7d1cd
> initcall: 7fa7d1d1
> initcall: 0010b32d (relocated to 7fa7d32d)
> dram_bank_mmu_setup: bank: 0
> initcall: 0010b305 (relocated to 7fa7d305)
> efi_runtime_relocate: Relocating to offset=7fa72000
>