From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements
Date: Fri, 30 Sep 2016 07:14:45 +0200 [thread overview]
Message-ID: <57EDF4C5.7080804@denx.de> (raw)
In-Reply-To: <1471418009-12660-1-git-send-email-hs@denx.de>
Hello Andreas,
Am 17.08.2016 um 09:13 schrieb Heiko Schocher:
> This series add some missing things for an at91sam9g15
> board, which gets not mainlined, but there are common
> fixes, which are posted with this patchserie.
>
> 2 important things:
> - enable icache for AT91 based boards
> speeds up them a lot, for example reading 8MiB from
> an SPI NOR flash into RAM takes with icache off ~15 seconds
> with icache enabled only ~5 seconds.
>
> gurnard board defines a board specific enable_caches()
> function which enables dcache .. with acomment that this
> breaks Ethernet MAC ... I removed this board specific
> function, and dcache enable functions should be
> added in arch/arm/mach-at91/arm926ejs/cache.c
>
> - SPL clock fix, posted as RFC, as it may breaks other boards.
> If so, we may make clock settings in SPL board configurable
> through a weak function?
>
> buildman finds no new errors/warnings with the patches
> from this patchseries applied.
>
>
> Heiko Schocher (6):
> arm: at91: mpddrc: add missing MPDDRC_MD defines
> ARM: at91: clock: correct PRES offset for at91sam9x5
> arm, at91: add icache support
> arm, at91: add some missing fields in PIO struct
> at91: add function to set IO drive
> [RFC] at91: SPL clock fix for AT91SAM9G15 based boards.
>
> arch/arm/mach-at91/arm926ejs/Makefile | 1 +
> arch/arm/mach-at91/arm926ejs/cache.c | 29 ++++++++++++++++++++++++++
> arch/arm/mach-at91/arm926ejs/clock.c | 6 ++++++
> arch/arm/mach-at91/include/mach/at91_pio.h | 11 +++++++++-
> arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 3 +++
> arch/arm/mach-at91/include/mach/gpio.h | 2 ++
> arch/arm/mach-at91/spl_at91.c | 13 +++++++++---
> board/bluewater/gurnard/gurnard.c | 6 ------
> drivers/gpio/at91_gpio.c | 29 ++++++++++++++++++++++++++
> 9 files changed, 90 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/mach-at91/arm926ejs/cache.c
>
This patchset is now pending for more than 1 month ... are there
any issues, or do you plan to apply it?
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2016-09-30 5:14 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 7:13 [U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements Heiko Schocher
2016-08-17 7:13 ` [U-Boot] [PATCH 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines Heiko Schocher
2016-09-18 2:07 ` Wenyou.Yang at microchip.com
2016-10-06 21:07 ` Andreas Bießmann
2016-10-28 16:49 ` [U-Boot] [U-Boot, " Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5 Heiko Schocher
2016-09-18 2:11 ` Wenyou.Yang at microchip.com
2016-10-06 21:40 ` Andreas Bießmann
2016-10-28 9:47 ` [U-Boot] [U-Boot, " Andreas Bießmann
2016-10-28 16:49 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 3/6] arm, at91: add icache support Heiko Schocher
2016-08-18 3:45 ` Simon Glass
2016-10-06 21:58 ` Andreas Bießmann
2016-10-28 16:49 ` [U-Boot] [U-Boot,3/6] " Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 4/6] arm, at91: add some missing fields in PIO struct Heiko Schocher
2016-09-18 2:09 ` Wenyou.Yang at microchip.com
2016-10-06 22:06 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 5/6] at91: add function to set IO drive Heiko Schocher
2016-09-18 2:05 ` Wenyou.Yang at microchip.com
2016-10-06 22:11 ` Andreas Bießmann
2016-08-17 7:13 ` [U-Boot] [PATCH 6/6] [RFC] at91: SPL clock fix for AT91SAM9G15 based boards Heiko Schocher
2016-09-18 2:19 ` Wenyou.Yang at microchip.com
2016-10-06 22:34 ` Andreas Bießmann
2016-09-30 5:14 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57EDF4C5.7080804@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox