[U-Boot] [PATCH 0/7] sunxi: Add support for the CHIP Pro

[Heiko Schocher <hs@denx.de>]

Hello Maxime,

Am 09.11.2016 um 15:44 schrieb Maxime Ripard:
> Hi Heiko,
>
> On Wed, Nov 09, 2016 at 08:47:12AM +0100, Heiko Schocher wrote:
>> Am 08.11.2016 um 17:21 schrieb Maxime Ripard:
>>> The CHIP Pro is a SoM made by NextThing Co, and that embeds a GR8 SIP, an
>>> AXP209 PMIC, a WiFi BT chip and a 512MB SLC NAND.
>>>
>>> Since the first Allwinner device coming whit an SLC NAND that doesn't have
>>> the shortcomings (and breakages) the MLC NAND has, we can finally enable
>>> the NAND support on a board by default.
>>>
>>> This is the occasion to introduce a bunch of additions needed imo to be
>>> able to come up with a sane NAND support for our users.
>>>
>>> The biggest pain point is that the BROM uses a different ECC and randomizer
>>> configuration than for the rest of the NAND. In order to lessen the number
>>> of bitflips, you also need to pad with random data the SPL image.
>>>
>>> Since it's quite tedious to do right (and most users won't be able to
>>> figure it out) and since if it is not done right, it will eventually turn
>>> into an unusable system (which is bad UX), we think that the best solution
>>> is to generate an SPL image that already embeds all this. We'll possible
>>> have to do the same thing for the U-Boot image (at least for the random
>>> padding) on MLC NANDs.
>>>
>>> The only drawback from that is that you need to flash it raw, instead of
>>> using the usual nand write, but it's just a different command, nothing
>>> major anyway.
>>>
>>> In order to flash it, from a device switched in FEL, on your host:
>>> sunxi-fel spl spl/sunxi-spl.bin
>>> sunxi-fel write 0x4a000000 u-boot-dtb.bin
>>> sunxi-fel write 0x43000000 spl/sunxi-spl-with-ecc.bin
>>> sunxi-fel exe 0x4a000000
>>>
>>> And on the board, once u-boot is running (assuming the NAND is already
>>> erased):
>>>
>>> nand write.raw.noverify 0x43000000 0 40
>>> nand write.raw.noverify 0x43000000 0x400000 40
>>>
>>> nand write 0x4a000000 0x800000 0xc0000
>>>
>>> I also encountered some weird bug in the private libgcc that prevents
>>> U-Boot from loading. Disabling CONFIG_USE_PRIVATE_LIBGCC fixes that.
>>
>> What was the problem?
>
> It has been reported here:
> http://lists.denx.de/pipermail/u-boot/2016-August/264513.html

Hmm.. could not find, what was the real problem ...

>>> Let me know what you think,
>>> Maxime
>>>
>>> Boris Brezillon (1):
>>>     mtd: nand: add support for the TC58NVG2S0H chip
>>>
>>> Hans de Goede (1):
>>>     sunxi: Enable UBI and NAND support
>>>
>>> Maxime Ripard (5):
>>>     sunxi: Sync GR8 DTS and AXP209 with the kernel
>>>     tools: sunxi: Add spl image builder
>>>     nand: sunxi: Add options for the SPL NAND configuration
>>>     scripts: sunxi: Build an raw SPL image
>>>     sunxi: Add support for the CHIP Pro
>>>
>>>    Makefile                          |    3 +-
>>>    arch/arm/dts/Makefile             |    1 +-
>>>    arch/arm/dts/axp209.dtsi          |    6 +-
>>>    arch/arm/dts/ntc-gr8-chip-pro.dts |  266 +++++++-
>>>    arch/arm/dts/ntc-gr8.dtsi         | 1132 ++++++++++++++++++++++++++++++-
>>>    configs/CHIP_pro_defconfig        |   27 +-
>>>    drivers/mtd/nand/Kconfig          |   16 +-
>>>    drivers/mtd/nand/nand_ids.c       |    3 +-
>>>    include/configs/sunxi-common.h    |   26 +-
>>>    scripts/Makefile.spl              |   12 +-
>>>    tools/.gitignore                  |    1 +-
>>>    tools/Makefile                    |    1 +-
>>>    tools/sunxi-spl-image-builder.c   | 1113 +++++++++++++++++++++++++++++-
>>>    13 files changed, 2603 insertions(+), 4 deletions(-)
>>>    create mode 100644 arch/arm/dts/ntc-gr8-chip-pro.dts
>>>    create mode 100644 arch/arm/dts/ntc-gr8.dtsi
>>>    create mode 100644 configs/CHIP_pro_defconfig
>>>    create mode 100644 tools/sunxi-spl-image-builder.c
>>>
>>> base-commit: d8bdfc80da39211d95f10d24e79f2e867305f71b
>>
>> Can you please add a README file, where the above things are explained?
>
> Sure, where do you want me to put it? in doc/README.* or somewhere
> else?

Yes, may doc/README.sunxi ?

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany