[U-Boot] of-platdata address map decode for 64-bits

[Kever Yang <kever.yang@rock-chips.com>]

Hi Simon,

     For rk3399, the data for sdram driver in dts is big, I don't want 
to do the copy for it,
so I think use of-platdata is a good method, and for image size, its 
smaller, then it's sooner to load.

Thanks,
- Kever
On 01/26/2017 10:22 PM, Simon Glass wrote:
> Hi Kever,
>
> On 17 January 2017 at 23:37, Kever Yang <kever.yang@rock-chips.com> wrote:
>> Hi Simon,
>>
>>      For my rk3399(64bit) dts, the address is described as below:
>> #address-cells = <2>;
>> reg = <0x0 0xfe320000 0x0 0x4000>;
>>
>> not like 32-bit soc which reg address describe like:
>> reg = <0xfe320000 0x4000>;
>>
>>      There should have some update for this dts decode, right?
>> like:
>> map_sysmem()
>> regmap_init_mem_platdata()
>>
>>      Do you have a idea to update all these kind of function call?
>> It will be very great if you can send a patch for it.
>>
>> Thanks,
>> - Kever
>>
> Yes I think so.
>
> But first I'd like to understand why we need to use of-platdata on
> this very modern SoC. Can you tell me the maximum SPL size you can
> support on this SoC? I thought you had removed the 30KB limit?
>
> Using of-platdata only saves 3-4KB.
>
> Regards,
> Simon
>
>
>