[U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply

[Kever Yang <kever.yang@rock-chips.com>]

Hi Simon,

On 12/04/2016 02:27 AM, Simon Glass wrote:
> Hi Marek, Kever,
>
> On 3 December 2016 at 06:15, Marek Vasut <marex@denx.de> wrote:
>> On 12/03/2016 05:29 AM, Simon Glass wrote:
>>> From: Kever Yang <kever.yang@rock-chips.com>
>>>
>>> Some board do not use the dwc2 internal VBUS_DRV signal, but
>>> use a gpio pin to enable the 5.0V VBUS power, add interface to
>>> enable the power in dwc2 driver.
>>>
>>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>>> Signed-off-by: Simon Glass <sjg@chromium.org>
>>> ---
>>>
>>> Changes in v3:
>>> - Drop use of static variable
>>>
>>>   drivers/usb/host/dwc2.c | 39 ++++++++++++++++++++++++++++++++++-----
>>>   1 file changed, 34 insertions(+), 5 deletions(-)
> Just to be clear, I will not be taking this patch. I will await
> Kever's new version based on my ideas in this patch and Marek's
> comments.
>
> This patch was just to help explain how to drop the static variable,
> since that seemed to be a point of confusion.

Thanks very much for your example, and really sorry for missing this patch,
I will send a new version later.

Thanks,
- Kever
>
> Regards,
> Simon
>
>
>